• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1545-1556
• /
• 2020

Recently, the International Commission on Radiological Protection (ICRP) has developed the Mesh-type Reference Computational Phantoms (MRCPs) for adult male and female to overcome the limitations of the current Voxel-type Reference Computational Phantoms (VRCPs) described in ICRP Publication 110 due to the limited voxel resolutions and the nature of voxel geometry. In our previous study, the MRCPs were used to calculate the dose coefficients (DCs) for idealized external exposures of photons and electrons. The present study is an extension of the previous study to include three additional particles (i.e., neutrons, protons, and helium ions) into the DC library by conducting Monte Carlo radiation transport simulations with the Geant4 code. The calculated MRCP DCs were compared with the reference DCs of ICRP Publication 116 which are based on the VRCPs, to appreciate the impact of the new reference phantoms on the DC values. We found that the MRCP DCs of organ/tissue doses and effective doses were generally similar to the ICRP-116 DCs for neutrons, whereas there were significant DC differences up to several orders of magnitude for protons and helium ions due mainly to the improved representation of the detailed anatomical structures in the MRCPs over the VRCPs.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.43-55
• /
• 2000

In traditional electronic packages the die and the substrate are interconnected with fine wire. Wire bonding technology is limited to bond pads around the peripheral of the die. As the demand for I/O increases, there will be limitations with wire bonding technology. Flip chip technology eliminates the need for wire bonding by redistributing the bond pads over the entire surface of the die. Instead of wires, the die is attached to the substrate utilizing a direct solder connection. Although several steps and processes are eliminated when utilizing flip chip technology, there are several new problems that must be overcome. The main issue is the mismatch in the coefficient of thermal expansion (CTE) of the silicon die and the substrate. This mismatch will cause premature solder Joint failure. This issue can be compensated for by the use of an underfill material between the die and the substrate. Underfill helps to extend the working life of the device by providing environmental protection and structural integrity. Flux residues may interfere with the flow of underfill encapsulants causing gross solder voids and premature failure of the solder connection. Furthermore, flux residues may chemically react with the underfill polymer causing a change in its mechanical and thermal properties. As flip chip packages decrease in size, cleaning becomes more challenging. While package size continues to decrease, the total number of 1/0 continue to increase. As the I/O increases, the array density of the package increases and as the array density increases, the pitch decreases. If the pitch is decreasing, the standoff is also decreasing. This paper will present the keys to successful flip chip cleaning processes. Process parameters such as time, temperature, solvency, and impingement energy required for successful cleaning will be addressed. Flip chip packages will be cleaned and subjected to JEDEC level 3 testing, followed by accelerated stress testing. The devices will then be analyzed using acoustic microscopy and the results and conclusions reported.

• Journal of the Korean Society of Costume
• /
• v.66 no.7
• /
• pp.192-208
• /
• 2016

Due to the paradigm shift in fashion industry, its contribution to social activities and social enterprises' practice of ethical fashion has been on the rise lately. The surveillance and regulations of international community have increased in light of the betterment of working conditions and protection of the rights, and corporate social responsibility has been emphasized through consumers' interest in ethical consumption. In this regard, the fashion social enterprises' responsible and ethical management can both boost the trust in business and value-added. The study aims to propose feasible methods by exploring ways to induce support from central and local governments, which will lead to the activation of future fashion social enterprises and paradigms shift of consumers's perception and value. The sustainability of social enterprises requires management line or policies that consider social, environmental, economic, and political aspects of virtuous cycle, differentiated internally or externally. Fashion social enterprises also need ethic management and social responsibility management that are distinctive from general fashion enterprises. Thus, they will not be sustainable or differentiated unless entrepreneurial faith and role is not clear. Education and continuous promotion including upcycling are critical to build consumer base as they can make consumers spend ethically and recognize social enterprises. In addition, social education and public relations need to take place in order to internalize consumer pattern. The goal of sustainable corporate social activity is to change the awareness and become social investment that returns some profits to the society as members in line with reviewing corporate image. This can lead to establishing the foundation of securing a big comsumer market and winning the trust of the consumer's through corporate social responsibility and investment.

• International Journal of Costume and Fashion
• /
• v.7 no.2
• /
• pp.1-17
• /
• 2007

The purpose of this study was to identify appearance management behavior related to well-being lifestyle of women. The results of the study were as follows: 1. The factors relating to a well-being lifestyle were personality and value, fashionable appearance, leisure activity, healthy food, brands, social activities, reasonable consumption, environmental protection, and individuality. The factors of appearance management behavior were weight management and skin care, apparel and accessory management, dietary treatment, bathing, make-up and hair styling, underwear management, using hospitals, beauty salons, and identity kits. 2. Women were classified into 4 kinds of groups: well-being, reasonable value pursuit, ostensible consumption, and bad-being. 3. The members of the well-being group were generally married, highly educated, had a high income, and spent a lot of money for their appearance management. They had a high level of appearance management in terms of weight and skincare, apparel and fashion accessories management, dietary treatment, bathing, make-up and hairstyling, underwear management, and in the use of hospitals and beauty salons. The members of the reasonable value pursuit group were generally married, less educated, with a medium income, and spent little for their appearance management. Members of the ostensible consumption group were generally unmarried, with a low income but spent lot of money for sundries and appearance management. They also had a high level of appearance management with regard to weight training and skin care, apparel and fashion accessory management, underwear management, the use of hospitals and beauty salons, and using identity kits. Members of the bad-being group were generally unmarried, had low incomes, little disposable income, spent little on appearance management, and didn't manage their appearance as a whole.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.137-138
• /
• 2019

The International Maritime Organization (IMO) adopted the Circular 101 (MSC / Circ. 1604) as an interim guidelines for MASS trials at the 101st Maritime Safety Committee. This guideline will be used as a guideline for the sea trials of Maritime Autonomous Surface Ships(MASS) in the future and will be used by government authorities and stake-holders to secure infrastructure for MASS safety, environmental protection and remote operation. The purpose of this study is to analyze the Interim Guidelines for MASS Trials adopted by IMO and to clearly classify the responsibilities and obligations of governments of stake-holders, and to present the main points of risk management necessary for maritime test operation from the perspective of human factors.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.226-228
• /
• 2008

In recent years, the companies of electric power equipment for MV and HV classes trend to develop the eco-friendly insulated(solid, eco-gas, air etc.) switchgear which replaces existent SF6 gas insulated switchgear due to environmental problems such as global warming and so on. This paper makes reference to the newly developed Solid Insulated Switchgear (SIS) which uses the eco-friendly material such as epoxy for insulation. The insulation of the solid insulated switchgear (SIS) is composed of an epoxy, vacuum and air. The solid insulated switchgear (SIS) is a slate of the art product. The advantages of SIS are advanced reliability, economical efficiency, safety, maintenance free, reduction of installation area and the protection of environment. The solid insulated switchgear (SIS) is FE Analyzed such as electromagnetic, mechanical, thermal and fluid in order to find the optimal design. Thens SIS has been verified by international standard test. (IEC 62271 - 100 and so on.) As a result of this, the solid insulated switchgear (SIS) has been estimated as an alternative for eco-friendly MV class switchgear.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.1
• /
• pp.59-70
• /
• 2000

In nature, plant diseases, insects and parasites (hereafter called as "pest") must be co-survived. The most common expression of co-survival of a host crop to the pest can be tolerance. With tolerance, chemical uses can be minimized and it protects environment and sustains host productivity and the minimum pest survival. Tolerance can be applicable in all living organisms including crop plants, lifestocks and even human beings. Tolerant system controls pest about 90 to 95% (this pest control system often be called as horizontal or partial resistance), while the use of chemicals or selection of high resistance controls pest 100% (the most expression of this control system is vertical resistance or true resistance). Controlling or eliminating the pests by either chemicals or vertical resistance create new problems in nature and destroy the co-survial balance of pest and host. Controlling pests through tolerance can only permit co-survive of pests and hosts. Tolerance is durable and environmentally-friend. Crop cultivars based on tolerance system are different from those developed by genetically modified organism (GMO) system. The former stabilizes genetic balance of a pest and a host crop in nature while the latter destabilizes the genetic balance due to 100% control. For three decades, the author has implemented the tolerance system in breeding maize cultivars against various pests in both tropical and temperate environments. Parasitic weed Striga species known as the greatest biological problem in agriculture has even been controlled through this system. The final effect of the tolerance can be an integrated genetic pest management (IGPM) without any chemical uses and it makes co-survival of pests in nature.in nature.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.16 no.1
• /
• pp.21-27
• /
• 2008

The expression of heat shock protein genes (Hsp 70, Hsp 40, Hsp 20.8 and Hsp 20.4) against thermal stress in silkworm Bombyx mori was performed through semi-quantitative reverse transcriptase-polymerase chain reaction (RT-PCR). Upon exposure of silkworm to two temperature regimes ($38^{\circ}C$ and $42^{\circ}C$), significant change in the expression of Hsp gene was observed as compared to the control. Hsp 70 and Hsp 40 showed increased expression than the small heat shock protein genes Hsp 20.8 and Hsp 20.4. The Hsp 70 showed increased expression during the recovery period as compared to 1 hr thermal treatments ($38^{\circ}C$/1 hr and $42^{\circ}C$/1 hr). Whereas, Hsp 40, Hsp 20.8 and Hsp 20.4 genes showed higher expression level at initial stages that later gradually decrease during recovery period. Tissue specific expression of Hsp 70 showed variation in the level of expression amongst the tissues. The mid gut and fat body tissues showed higher expression than the cuticle and silk gland tissue. The Hsp 70, Hsp 40 gene expression was analyzed in thermotolerant (Nistari) and thermo susceptible silk worm strain (NB4D2) and results showed significant variation in their expression level. The Nistari showed higher expression of Hsp 70 and Hsp 40 genes than the NB4D2. These findings provide a better understanding of cellular protection mechanisms against environmental stress such as heat shock, as these Hsps are involved in an organism thermotolerance.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.709-714
• /
• 2020

Forest resources are the most important element that can affect the nature environment directly in modern society. Due to the fast industrialization of our country and marginal states like China, many people suffer torments from severe environmental pollution like yellow and fine dusts everyday recently. So the interests concerned about the significance of nature and environment become major issue nowadays. Precious forest resources, however, are not properly managed and destroyed vainly due to frequent mountain fires, damages by floods, and unplanned land development in real world. Therefore, efficient forest management is required to solve these problems effectively. In this research, we design and implement the forest information database that can predict the growth of forest resources and enables us to manage forest resources efficiently, make decision for logging, build the waterway to prevent flooding, and construct a future tree-planting project easily using forest aerial photograph taken by a drone in order to deploy and manage the forest resources scientifically and systematically.

• Journal of Plant Biotechnology
• /
• v.48 no.4
• /
• pp.246-254
• /
• 2021

Environmental stresses are estimated to have reduced global crop yields of wheat by 5.5%. However, traditional approaches for the transfer of resistance to these stresses in wheat plants have yielded limited results. In this regard, genetic transformation has undoubtedly opened up new avenues to overcome crop losses due to various abiotic stresses. Particle bombardment has been successfully employed for obtaining transgenic wheat. However, most of these procedures employ immature embryos, which are not available throughout the year. Therefore, the present investigation utilized mature seeds as the starting material and used the calli raised from three Moroccan durum wheat varieties as the target tissue for genetic transformation by the biolistic approach. The pANIC-5E plasmid containing the SINA gene for drought and salinity tolerance was used for genetic transformation. To enhance the regeneration capacity and transformation efficiency of the tested genotypes, the study compared the effect of copper supplementation in the induction medium (up to 5 μM) with the standard MS medium. The results show that the genotypes displayed different sensitivities to CuSO₄, indicating that the transformation efficiency was highly genotype-dependent. The integration of transgenes in the T₀ transformants was demonstrated by polymerase chain reaction (PCR) analysis of the obtained resistant plantlets with primers specific to the SINA gene. Among the three genotypes studied, 'Isly' showed the highest efficiency of 9.75%, followed by 'Amria' with 1.25% and 'Chaoui' with 1%.