• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권6호
• /
• pp.297-300
• /
• 2014

Objectives: To compare the clinical and radiological outcomes after closed reduction (CR) and open reduction and internal fixation (ORIF) in the management of subcondylar fractures. Materials and Methods: Forty-eight patients presenting with subcondylar fracture between January 2010 and March 2013 were evaluated retrospectively. Fifteen patients were treated with CR and 33 patients with ORIF. The clinical and radiologic parameters were evaluated during follow-up (mean, 7.06 months; range, 3 to 36 months). Results: In the CR group, no patients had any problems with regard to the clinical parameters. The average period of maxillomandibular fixation (MMF) was 5.47 days. The preoperative average tangential angulation of the fractured fragment was $3.67^{\circ}$, and loss of ramus height was 2.44 mm. In the ORIF group, no clinical problems were observed, and the average period of MMF was 6.33 days. The preoperative average tangential angulation of the subcondylar fragment was $8.66^{\circ}$, and loss of ramus height was 3.61 mm. Conclusion: CR provided satisfactory clinical results, though ORIF provided more accurate reduction of the fractured fragment. So there is no distinct displacement of fractured fragment, CR should be selected than ORIF because of no need for surgery.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.438-447
• /
• 2018

For a fixed jacket type offshore structure directly supported by the seabed, the structural behavior of offshore structure depends on the soil properties. Soil properties affect on the stiffness of the piles and the boundary condition in the structural analysis. The structural analysis is performed using PSI (Pile-Soil Interaction) suggested in the code and design rule. PSI analysis of the jacket structure is carried out after various soil types are selected according to the soil properties like internal friction angle, undrained shear strength, unit weight and so on. Three types of soil are selected by varying strength for a clay and sand, respectively. The structural analysis of the jacket structure is performed using these soils. The results about axial and lateral reaction force and the stress and displacement on the structure are compared. As a results, the structural response is smaller as the soil becomes more stiff. In conclusion, it is confirmed that the structural response of fixed jacket type offshore platform supported by seabed is sensitive to the change of soil properties.

• 한국전산구조공학회논문집
• /
• 제26권1호
• /
• pp.79-87
• /
• 2013

레벨셋방법과 헤비사이드 강화를 이용한 아이소-지오메트릭 위상최적설계 방법을 개발하였다. 레벨셋 방법에서는 초기해석영역은 고정되어 있으며 경계는 레벨셋 함수값을 이용한 암시적인 동적 경계로 표현되며, 이는 복잡한 위상적 변화를 용이하게 표현할 수 있게 한다. 헤비사이드 강화는 기존의 기저함수에 내부 경계를 표현하는 강화 함수를 더함으로써 아이소-지오메트릭 해석법의 정밀도를 향상시킨다. 제안된 위상 최적설계 방법은 다음과 같은 이점을 갖는다. 아이소-지오메트릭 해석법을 이용하여 정밀한 기하 형상을 얻을 수 있으며 텐서 곱을 이용하여 정의된 패치의 한계를 헤비사이드 강화를 이용함으로써 해결할 수 있다. 단일 패치를 사용함으로써 연속적인 응력 분포를 얻어낼 수 있을 뿐 아니라 불연속적인 변위장 또한 표현해 낼 수 있다. 레벨셋 방법론이 암시적 동적 경계를 잘 표현하기 때문에 이를 이용하여 헤비사이드 강화를 이용한 아이소-지오메트릭 해석법에서 위상의 변화를 잘 표현해 낼 수 있다.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.44-50
• /
• 2013

Process gas piping is one of the most basic components frequently used in the refinery and petrochemical plants. Many kinds of by-product gas have been used as fuel in the process plants. In some plants, natural gas is additionally introduced and mixed with the byproduct gas for upgrading the fuel. In this case, safety or design margin of the changed piping system of the plant should be re-evaluated based on a proper design code such as ASME or API codes since internal pressure, temperature and gas compositions are different from the original plant design conditions. In this study, series of piping stress analysis were conducted for a process piping used for transporting the mixed gas of the by-product gas and the natural gas from a mixing drum to a knock-out drum in a refinery plant. The analysed piping section had been actually installed in a domestic industry and needed safety audit since the design condition was changed. Pipe locations of the maximum system stress and displacement were determined, which can be candidate inspection and safety monitoring points during the upcoming operation period. For studying the effects of outside air temperature to safety the additional stress analysis were conducted for various temperatures in $0{\sim}30^{\circ}C$. Effects of the friction coefficient between the pipe and support were also investigated showing a proper choice if the friction coefficient is important. The maximum system stresses were occurred mainly at elbow, tee and support locations, which shows the thermal load contributes considerably to the system stress rather than the internal pressure or the gravity loads.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권3호
• /
• pp.102-113
• /
• 2017

비정형 판 부재의 탄소성 좌굴 강도를 평가할 수 있는 새로운 지표를 제안하였다. 부재 경계면에 작용하는 하중 또는 경계면의 변화에 따른 외부일 또는 변형에너지를 부재의 평형 변형경로에 따라 계산하고, 이 에너지의 이차 변분량의 부호가 양에서 음으로 바뀌는 시점을 안정한계로 제안하였다. 판 부재의 단면력을 등분포 또는 선형으로 근사한 상태로 단면력을 사용하여 좌굴한계를 평가하는 현 기법과는 반대로 단면력의 변화가 비선형적인 복잡한 경우에도 간단히 좌굴한계를 평가할 수 있다. 선형탄성 문제에 대해서는 본 기법의 결과와 전통적인 방법이 동일한 결과를 도출한다.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.231-254
• /
• 1994

Fracture of cusp, on posterior teeth, especially those carious or restored, is major cause of tooth loss. Inappropriate treatments, such as unnecessarily wide cavity preparations, increase the potential of further trauma and possible fracture of the remaining tooth structures. Fracture potential may be directly related to the stresses exerted upon the tooth during masticatory function. The purpose of this study is to evaluate the fracture resistance of tooth, restored with composite resin inlay. In this study, MOD inlay cavity prepared on maxillary first premolar and restored with composite resin inlay. Three dimensional finite element models with eight nodes isoparametric solid element, developed by serial grinding-photographing technique. These models have various occlusal isthmus and depth of cavity, 1/2, 1/3 and 1/4 of isthmus width and 0.7, 0.85 and 1.0 of depth of cavity. The magnitude of load was 474 N and 172 N as presented to maximal biting force and normal chewing force. These loads applied onto ridges of buccal and lingual cusp. These models analyzed with three dimensional finite element method. The results of this study were as follows : 1. There is no difference of displacement between width of occlusal isthmus and depth of cavity. 2. The stress concentrated at bucco-mesial comer, bucco-disal comer, pulpal line angle and the interface area between internal slopes of cusp and resin inlay. 3. The vector of stress direct to buccal and lingual side from center of cavity, to tooth surface going on to enamel. The magnitude of vector increase from occlusal surface to cervix. 4. The crack of tooth start interface area, between internal slop of buccal cusp and resin inlay. It progresses through buccopulpal line angle to cervix at buccomesial and buccodistal comer. 5. The influence with depth of cavity to fracture of tooth was more than width of isthmus. 6. It would be favorable to make the isthmus width narrower than a third of the intercuspal distance and depth of cavity is below 1 : 0.7.

• 대한한방내과학회지
• /
• 제18권2호
• /
• pp.83-93
• /
• 1997

Rhizoma Coptidis, a traditional herb medicine, has been used in Korea and China for many centuries as a treatment for many disease. The purpose of the present study was to determine the effect of Rhizoma Coptidis on histamine-induced tracheal smooth muscle contraction in guinea pigs and rats. Guinea pigs(500g, male) and rats(250g, male) were killed by $CO_2$ exposure and a segment (8-10mm) of the thoracic trachea from each guinea pig was cut into equal segments and mounted 'in pairs' in a tissue bath. Contractile force was measured with force displacement transducers under 0.5g loading tension. The dose of histamine which evoked 50% of maximal response ($ED_{50}$) was obtained from cumulative dose response curves for histamine ($10^{-7}-10^{-3}M$). Contractions evoked by histamine($ED_{50}$) were inhibited significantly by Rhizoma Coptidis. The mean percent inhibition was 33.2% after 1.5mg/ml Rhizoma Coptidis, and 69.5% after 5.0mg/ml Rhizoma Coptidis in guinea pigs, and the mean percent inhibition was 25.3% after 1.5mg/ml Rhizoma Coptidis, and 65.8% after 5.0mg/ml Rhizoma Coptidis in rats. Indomethacin ($10^{-7}M$) slightly but significantly attenuated the inhibitory effects of Rhizoma Coptidis. But propranolol and methylene blue ($10^{-7}M$) did not significantly alter the inhibitory effect of Rhizoma Coptidis. These results indicate that Rhizoma Coptidis can relax histamine-induced contraction of guinea pig and rat tracheal smooth muscle, and that this inhibition involves, in part, cyclooxygenese inhibitor.

• 디지털융복합연구
• /
• 제17권3호
• /
• pp.205-213
• /
• 2019

건설현장의 굴토작업과 흙막이 가시설은 서로 밀접한 관계를 가지고 있다. 협소한 공간에서 가장 효율적으로 지하구조물을 축조하고 굴토작업시 외측 배면의 토사 이완을 방지하고 지하수위를 유지하기 위한 방안으로 안전성이 확보된 흙막이 가시설 설치는 반드시 필요하다. 본 연구는 기존 지하층 굴토공사에서 흙의 유실을 방지하기 위해 설치하는 가설흙막이를 종래에는 가설벽체를 형성하고 어스앵커, 래커, 스트러트 등을 이용하여 내부 지보를 하고 굴토공사를 시행하던 방식에서, RSB공법은 기존 재래식공법의 문제점을 개선하여, 내부 지보재를 제거하고 2열 엄지말뚝과 브레이싱을 이용하여 자립으로 토압에 저항하도록 하여 지반굴착을 진행하는 공법이다. 본 연구에서는 RSB공법 현장시범적용과 계측결과를 통하여 굴착방법에 따른 흙막이 가시설의 공법 적용성, 평가결과 발생변위가 모두 계측 허용치 만족하고. 기존 재래식공법에 비해 시공성과 경제성이 향상되었다.

• 한방재활의학과학회지
• /
• 제29권3호
• /
• pp.1-13
• /
• 2019

Objectives This review aims to analyze the current research trend in the usage of bee venom (BV) acupuncture for spinal diseases. Methods We collected 80 articles on BV acupuncture clinical study for spinal diseases by searching Korean web databases 'Journal of Korean Medicine Rehabilitation', 'Oriental Medicine Advanced Searching Integrated System', 'Korean Traditional Knowledge Portal' from 1999 to 2018. Results We summarized the most frequent clinical treatment methods of BV acupuncture. 1. Herniated intervertebral disc was treated for 40% and the treated spinal diseases were various. 2. '1:10,000' in the type of BV was chosen for 21%. 3. 29% of studies used 6-7 acupoints per session and 23% of studies used 'BL' as the injection site. 3. The highest volume of injected BV into each acupoint was 0.1 cc for 34% and the highest total volume of injected BV was 1.0 cc for 39%. Conclusions We found the limited evidence on the lack of consensus and detailed description in the reported experimental design. The results in this review suggest that future works should focus on more consistent and systematic study for the reproducible and standardized treatment methods.

• International Journal of Advanced Culture Technology
• /
• 제10권3호
• /
• pp.146-155
• /
• 2022

The purpose of this study is to investigate the recyclability of Shenlong in China using SWOT. The main analysis results are as follows. First, provided that the company's current capacity utilization rate is seriously insufficient, reducing staff is one among the effective ways. Second, Shenlong should open a web store to cater to young people's online shopping behavior, and further expand the brand visibility using national mainstream media and online shopping platforms like Taobao and JingDong to market Dongfeng Peugeot and Dongfeng Citroen on the whole network. Third, under the premise of maintaining the present best-selling models, Shenlong should appropriately reduce the amount of models, adjust the assembly capacity ratio of every model and every displacement in real time per the newest market trends, increase the agility of auto companies' production, and timely meet the wants of domestic consumers. Fourth, dual-brand coordination and channel integration are very necessary, and also the profitability and profitability of dealers are going to be further improved, thereby increasing sales. Fifth, target building new energy leading products of Shenlong, strive to attain the forefront of the industry within the sales of recent energy vehicles within 5 years, and gradually expand new energy vehicle products from passenger vehicles to passenger vehicles and commercial vehicles. Finally, the marketing field of Shenlong Automobile should achieve "three major changes", that is, change from a goal-driven type to a demand-driven type, cancel the bundling of outlet invoicing goals and delivery incentive tiers; start from basic capabilities, and set pragmatic and challenging goals; focus Channels, to realize following the activation of outlets, and single store sales increase.