• Imaging Science in Dentistry
• /
• v.52 no.3
• /
• pp.303-308
• /
• 2022

Purpose: This technical report aims to describe and detail the use of micro-computed tomography for a reliable evaluation of the bulk-fill composite/tooth interface. Materials and Methods: Bulk-fill composite restorations in tooth cavities were scanned using micro-computed tomography to obtain qualitatively and quantitatively valuable information. Two-dimensional information was processed using specific algorithms, and ultimately a 3-dimensional (3D) specimen reconstruction was generated. The 3D rendering allowed the visualization of voids inside bulk-fill composite materials and provided quantitative measurements. The 3D analysis software VG Studio MAX was used to perform image analysis and assess gap formation within the tooth-restoration interface. In particular, to evaluate internal adaptation, the Defect Analysis addon module of VG Studio Max was used. Results: The data, obtained with the processing software, highlighted the presence and the shape of gaps in different colours, representing the volume of porosity within a chromatic scale in which each colour quantitatively represents a well-defined volume. Conclusion: Micro-computed tomography makes it possible to obtain several quantitative parameters, providing fundamental information on defect shape and complexity. However, this technique has the limit of not discriminating materials without radiopacity and with low or no filler content, such as dental adhesives, and hence, they are difficult to visualise through software reconstruction.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.5
• /
• pp.395-400
• /
• 2000

In this paper, we propose a new neuro-fuzzy controller based on reinforcement learning. The proposed system is composed of neuro-fuzzy controller which decides the behaviors of an agent, and dynamic recurrent neural networks(DRNNs) which criticise the result of the behaviors. Neuro-fuzzy controller is learned by reinforcement learning. Also, DRNNs are evolved by genetic algorithms and make internal reinforcement signal based on external reinforcement signal from environments and internal states. This output(internal reinforcement signal) is used as a teaching signal of neuro-fuzzy controller and keeps the controller on learning. The proposed system will be applied to controller optimization and adaptation with unknown environment. In order to verifY the effectiveness of the proposed system, it is applied to collision avoidance of an autonomous mobile robot on computer simulation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.226-233
• /
• 2016

Purpose: The purpose of this study was to evaluate the adaptation of lithium disilicate crowns fabricated by CAD-CAM (computer aided design-computer aided manufacturing) and heat-press technique to compare two different measurement methods in assessing fit of the ceramic crowns: micro CT and cross-section technique. Materials and methods: A prepared typodont mandibular molar for ceramic crown was duplicated and ten dies were produced by milling the PMMA (polymethylmethacrylate) resin. Ten vinyl polysiloxane impressions were made and stone casts were produced. Five dies were used for IPS e.max Press crowns with heat-press technique. The other five dies were used for IPS e.max CAD crowns with CAD-CAM technique. Ten lithium disilicate crowns were cemented on the resin dies using zinc phosphate cement with finger pressure. The marginal and internal fits in central buccolingual plane were evaluated using a micro CT. Then the specimens were embedded and cross-sectioned and the marginal and internal fits were measured using scanning electronic microscope. The two measurement methods and two manufacturing methods were compared using Mann-Whitney U test (SPSS 22.0). Results: The marginal and internal fit values using micro CT and cross-section technique were similar, showing no significant differences. There were no significant differences in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique. Conclusion: Both micro CT and cross-section technique were acceptable methods in the evaluation of marginal and internal fit of lithium disilicate crown. There was no difference in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique except occlusal fit.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.2
• /
• pp.121-128
• /
• 2006

Background: The "health-related quality of life" (HRQL) for patients with chronic respiratory disease has been emphasized, because chronic respiratory disease (CRD) is chronic and progressive, and it finally causes disability. HRQL instruments may be useful for monitoring patients' progress or for determining the most appropriate choice of treatment. We describe the adapting St George's Respiratory Questionnaire (SGRQ), which is a self-administered questionnaire developed by Jones et al. (1991), into the Korean version for covering three domains of health for the patients suffering with airways disease. Method: We obtained the original SGRQ from the author after gaining permission. For adaptation, we created an expert panel and translated the original questionnaire into Korean language. The translated questionnaire was then back-translated by bilingual experts and we compared it with the original questionnaire. After correction and feasibility testing, 74 patients with chronic respiratory disease (COPD, asthma, destroyed lung) completed the Korean version of the SGRQ. The clinical status of each patients was evaluated concurrently with measurement of their health status. Result: The Korean version of the SGRQ was acceptable and easy to understand. Cronbach's alpha reliability coefficient was 0.92 for the overall scale and 0.63 for the "Symptoms", subscale, 0.87 for the "Activity", subscale, and 0.89 for the "Impacts" subscales. The correlation coefficients between the overall score and the Borg scale score, oxygen saturation, and forced expiratory volume in one second ($FEV_1$) were 0.52, -0.32 and -0.26, respectively. These results support that the Korean SGRQ was correlated with other measurements. Conclusion: The Korean SGRQ was reliable and valid for patients with chronic respiratory disease, such as COPD, asthma, and destroyed lung. The SGRQ score was well correlated with other respiratory measurements as well. Although further studies should complete the adaptation work, our results suggest that the SGRQ may be used in Korea and also for international studies involving Korean CRD patients.

• Korean Journal of Culture and Social Issue
• /
• v.21 no.3
• /
• pp.299-315
• /
• 2015

This study examines correlations among factors that reportedly affect adjustment to military life: self esteem, locus of control,, social support and stress coping strategies. The study also attempts to validate the structural model to enhance understanding of the process of adjusting to the military life. The subjects of the study were 447 listed soldiers from private to sergeant currently stationed and serving in an army post in Gangwon-Do, Korea. The following tools were used for this study. Based on self-inventory questionnaires, evaluations were made regarding self esteem, locus of control, social support, stress management, adaptation to military life. Reliability of each criterion was evaluated based on reliability examination, correlations among parameters were analyzed, and the structural equation model was validated to verify the research model. The results of the study can be summarized as follows. First, internal control and self esteem have significant positive influence on social support and stress coping. Second, internal control and self esteem affect adjusting to military life through social support and active coping, two factors mediated in this study to act as parameters between self-esteem and internal control and military adaption. This study emphasizes intervention such as establishment of a social support system and training for taking necessary actions as limitations of studies dealing with internal traits and military adaptation. Since the subjects of this study were chosen from an army based in a single location for convenience' sake, it may be difficult to generalize the results to analyze the entire military.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1173-1178
• /
• 2007

The robot for narrow space is used in searching, investigating or cleaning. Up to now variety of researches on in-pipe robots have been introduced. However it is still hard to overcome vertical or curved passage. In most cases of narrow space robots are able to travel just aimed diameter which was selected when those are developed. Also, a large percentage of robots are not able to detect the configuration of pipe or circumstance. In this paper we present a robot called PAROYSⅡ for narrow space with vertical and curved passage. This proposed robot is not affected at all to variance of pipes, vertical or horizontal passages, curved pipes, projecting parts and parallel planes. In addition to that, it will perceive the internal configuration of pipe and terrain, which will be not only available to control navigating scheme by itself, but also mappable about the passage which the robot traveled. Core points in the design and structure are introduced and preliminary verification is given.

• Journal of Communications and Networks
• /
• v.4 no.4
• /
• pp.336-343
• /
• 2002

A major challenge for next generation mobile communication is capturing the system architecture’s complexity with all its internal and external dependencies. Seamless integration of heterogeneous environments in all system parts is a key requirement. Moreover, future systems have to consider the different evolution cycles of individual system parts. Among those, services are expected to change the fastest. With respect to these considerations, we propose an overall architecture for next generation mobile communication systems. It covers all system parts from wireless transmission to applications including network and middleware platform. Our approach focuses on adaptability in terms of recon- figurability and programmability to support unanticipated system evolution. Therefore, we consider abstraction layers which consist of adaptable cooperating components grouped by open platforms rather than rigid system layers. In addition to that, we introduce cross-layer cooperation allowing an efficient use of the available resources. Specific scenarios illustrate the feasibility of our approach.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.133-143
• /
• 2011

It seems required to determine what might affect the technological innovation activities of manufacturing companies and what kind of role they could play for them to carry out technological innovation activities in an effective way. The objective of the present study is thus to conduct a depth empirical analysis of the structural relations among business environment, technological innovation activities and performance of manufacturing companies. From the analysis, following outcomes could be drawn: First, with regard to the relationship between business environment and technological innovation activities of manufacturing companies, it has become clear that the external environment is a factor that can influence technological innovation activities such as management of technical property, technological innovation system as well as technical network, while it exercises no impact upon adaptation of manufacturers to new technologies. The internal environment, on the other hand, turns out to have influence on such overall factors of technological innovation activities as management of technical property, technological innovation system, adaptation to new technologies and technical network; and Second, as for the relationship between technological innovation activities and their performance, it has been obvious that management of technical property and technological innovation system, both factors of technological innovation activities, affect the performance of product development and financial achievements of manufacturing companies. Their adaptation to new technologies will also affect their performance of product development as well as financial achievements. These findings suggest that it is important for manufacturing companies to set up an operating system that may be able to upgrade the practical applicability of their technological development activities in an attempt to promote performance of their technological innovation activities.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.7
• /
• pp.99-106
• /
• 2018

The purpose of this study is to examine adaptation types of urban tissue in Ipjeong-dong area, Seoul. Ipjeong-dong area has urban tissue those were made during Joseon dynasty and this is remaining even in the present time. This area was originally urban hanok residential districts till late 1950s. However, it has changed into machinery manufacture business area after demolition of Cheonggyechon shantytown. After several workshops and stores moved in this area, manufacturer and merchants required for more spaces due to lack of room for machinery. To place more workshops in the block, lot alteration were happened and accessibility to workshops inside the block were required. Adaptive road network which is main form of adaptative urban tissue were made to adapt in this kind of poor urban condition. To research about adaptive urban tissue making, distribution were explored and comparison tasks between various cadastral map of 1940, 1964, 1970s and 2017 were conducted. From these tasks, certain types of adaptive urban tissues and characteristics of these elements were found. First of all, forms of adaptive road depend on the surrounded environment. Connecting internal building corridor with original road system is categorized as Type A. Altering a portion of the buildings to make adaptive roads is categorized as Type B. Second, there were two types of formation of adaptive road. Type 1 is for adaptive road which is independent gesture from original road network. Type 2 is for adaptive road which is altering the form of original road network by lengthening or connecting two different dead-end roads.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.2
• /
• pp.57-71
• /
• 2009

This study aims to investigate the stress factors of students in Dental Hygiene Department who will soon take the national examination, corresponding countermeasures and relationship of internal and external personality. On the basis of the results from investigation, this study will identify the methods to effectively cope with stress and to take the national examination with more positive thinking for the students and faculty members in Dental Hygiene Department, who have to pass the difficult test, the national examination. The structured questionnaires were given to junior students in Dental Hygiene Department in three colleges, to identify the stress factors, methods to deal with stress and A/B personality types. For the stress factor by field, the M college showed significantly higher stress about curriculum and assignment than the C college. In the stress factor analysis by item, the lack of information on national examination in the test area, all items in learning environment, a quantity of assignment that doesn't help the preparation of national examination in the assignment area, and lack of information on employment in job area demonstrated the significant difference(p<0.05). For the methods of subjects to deal with stress, several subcategories of long-term and short-term adaptation had significance. In case of the methods to deal with stress by personality type, B type in the short-term adaptation method in M college and A type in the long-term adaptation method in C college were significantly higher(p<0.05). As for the correlation between the population sociological features and stress factors by personality type, health status had the high correlation with test in the test area. In other areas, the travel hours to school showed the significant correlation. The higher the records were, the longer the travel hours were and the better the health status was, the higher the long-term adaptation method scores were. Moreover, the personality of A type showed the higher scores in the long-term adaptation method than that of B type. The health status and personality type showed the significant correlation(p<0.05). In conclusion, it is required to prevent any situations b identify the personality type and stress reasons of the students in Dental Hygiene Department who will take the national examination soon. The additional requirement is the continuing interest and counseling of faculty members to help students to cope with stress with positive attitude.