• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1343-1345
• /
• 2003

An internal wave observation experiment by SAR in South China Sea is described. Two scenes of Radarsat ScanSAR images were acquired. Internal solitary waves are found in all the two images. It is concluded that these internal waves are generated in Bashi channel. Relationship between internal wave generation and tide is studied based on analyzing of tidal data of Legaspi in Philippine. Using ocean environmental data of this sea area internal waves’ amplitude and wave speed are detected by SAR images.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.689-692
• /
• 2004

Hydrographic data obtained from several ship experiments have shown that internal waves are frequently observed in the East (Japan) Sea, mostly in the continental slopes located along the western side of the East Sea. It is well known that oceanic internal waves can be detected well in synthetic aperture radar (SAR) images. Interactions between surface capillary-gravity waves and horizontally varying surface currents induced by internal waves produce variations in sea surface roughness which can be detected by SAR. C-band SAR images from ERS, ENVISAT ASAR and RADARSAT have been used to study the characteristics of internal waves in the East Sea. The observed properties of internal waves from many SAR images were compared and verified from in-situ measurements and theories.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.364-367
• /
• 2006

Nonlinear internal waves (NLIWs) are usually generated by nonlinear process on linear internal waves (IW). Near HengChun Ridge that links Taiwan and Luzon Islands, we found that there are linear internal waves following NLIW and they travel westward at different speed, about 1.5 m/s for IW and 2.9 m/s for NLIW. This phenomenon was observed on site with ship radar and echo sounders, and later verified with thermistor chain. West of Luzon Strait, the separation of NLIW are 5 km or more, while linear internal waves are lines of wave crests at nearly equal distance that is only a few hundred meters apart. The current hypothesis is that most of the energy of internal tide forms a beam that propagates upward from the eastern shoulder of ocean ridge and later interacts with sea surface and thermocline. The interaction with thermocline generates linear internal wave that propagate along the pycnocline at about 1.5 m/s. The interaction with sea surface scatters internal wave energy downward, ensonifies the water column and generates large nonlinear waves that propagate westward at 2.9 m/s as mode 1 in a waveguide.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.943-945
• /
• 2006

The experiment on study of ambient nose generated by large-amplitude internal waves in Luzon Strait is analyzed. Simultaneous observations of internal waves and characteristics of ambient noise generated by them were carried out. Fast 50-m solitary internal wave propagated to the northwest direction with speed more than 3 m/s was observed. It was revealed an enhancing of ambient noise level (at frequency range 1-2 kHz) at a time of passing the face side of the solitary wave.

• Ocean Systems Engineering
• /
• v.5 no.4
• /
• pp.261-277
• /
• 2015

Internal solitary waves occur due to density stratification and are nonlinear in nature. These waves have been observed in many parts of the world including the South China Sea, Andaman Sea and Sulu Sea. Their effect on floating systems has been an emerging field of interest and recent offshore developments in the South China Sea where several offshore oil and gas discoveries are located have confirmed adverse effects including large platform motions and riser system damage. A valid numerical model conforming to the physics of internal waves is implemented in this paper and the effect on a spar platform is studied. The physics of internal waves is modeled by the Korteweg-de Vries (KdV) equation, which has a general solution involving Jacobian elliptical functions. The effects of vertical density stratification are captured by solving the Taylor Goldstein equation. Fully coupled time domain analyses are conducted to estimate the effect of internal waves on a typical truss spar, which is configured to South China Sea development requirements and environmental conditions. The hull, moorings and risers are considered as an integrated system and the platform global motions are analyzed. The study could be useful for future guidance and development of offshore systems in the South China Sea and other areas where the internal wave phenomenon is prominent.

• Journal of Korean Society on Water Environment
• /
• v.31 no.4
• /
• pp.367-376
• /
• 2015

The momentum and kinetic turbulent energy carried by the wind to a stratified lake lead to basin-scale motions, which provide a major driving force for vertical and horizontal mixing. A three-dimensional (3D) hydrodynamic model was applied to Lake Tahoe, located between California and Nevada, USA, to simulate the dominant basin-scale internal waves in the deep lake. The results demonstrated that the model well represents the temporal and vertical variations of water temperature that allows the internal waves to be energized correctly at the basin scale. Both the model and thermistor chain (TC) data identified the presence of Kelvin modes and Poincare mode internal waves. The lake was weakly stratified during the study period, and produced large amplitude (up to 60 m) of internal oscillations after several wind events and partial upwelling near the southwestern lake. The partial upwelling and followed coastal jets could be an important feature of basin-scale internal waves because they can cause re-suspension and horizontal transport of fine particles from nearshore to offshore. The internal wave dynamics can be also associated with the distributions of water quality variables such as dissolved oxygen and nutrients in the lake. Thus, the basin-scale internal waves and horizontal circulation processes need to be accurately modeled for the correct simulation of the dissolved and particulate contaminants, and biogeochemical processes in the lake.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.3
• /
• pp.236-244
• /
• 2019

Internal waves occur at the interface between two layers caused by a seawater density difference. The internal waves generated by a body moving in a two-layer fluid are also related to the generation of surface waves because of their interaction. In these complex flow phenomena, the experimental measurements and experimental set-up for the wave patterns of the internal waves and surface waves are very difficult to perform in a laboratory. Therefore, studies have mainly been carried out using numerical analysis. However, model tests are needed to evaluate the accuracy of numerical models. In this study, the various experimental conditions were evaluated using CFD simulations before experiments to measure the wave patterns of the internal waves and surface waves in a stratified two-layer fluid. The numerical simulation conditions included variations in the densities of the fluids, depth of the two-layer fluid, and moving speed of the underwater body.

• Korean Journal of Remote Sensing
• /
• v.25 no.2
• /
• pp.155-163
• /
• 2009

An abundance of internal waves is observed by SAR in the Yellow Sea during summer. They are small scaled internal waves and are not relatively studied well compared to the ones in the East/South China Sea. These internal waves should be considered in the study of physio-biological properties of the Yellow Sea because the mixing of the stratified surface water caused by internal waves during summer is important for ocean biological environment, and they also affect the sediment transport and acoustic signal transmission in the continental shelf region. To understand the characteristics of internal waves, it is important to get the spatio-temporal information of internal waves simultaneously by executing in-situ measurements as well as the SAR observation. This study tracks the internal waves observed by SAR in the time series of temperature profile data by analyzing simultaneously acquired in-situ measurement data and RADARSAT SAR image on 29 May 2002.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.3
• /
• pp.685-699
• /
• 2014

In this study, the dynamic responses of a riser under the combined excitation of internal waves and background currents are studied. A modified Taylor-Goldstein equation is used to calculate the internal waves vertical structures when background currents exist. By imposing rigid-lid boundary condition, the equation is solved by Thompson-Haskell method. Based on the principle of virtual work, a nonlinear differential equation for riser motions is established combined with the modified Morison formula. Using Newmark-${\beta}$ method, the motion equation is solved in time domain. It is observed that the internal waves without currents exhibit dominated effect on dynamic response of a riser in the first two modes. With the effects of the background currents, the motion displacements of the riser will increase significantly in both cases that wave goes along and against the currents. This phenomenon is most obviously observed at the motions in the first mode.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.46-52
• /
• 2000

Internal waves existing in the stratified ocean significantly affect acoustic propagation. In order to understand the effects of internal waves on acoustic propagation, the sound speed fluctuations due to internal waves are generated based on the Garrett-Munk spectrum which is derived from measured data in the East Sea. The acoustic propagation, where internal waves are present, is simulated numerically using a Galerkin higher order parabolic equation method(SNUPE). These results show favorable comparison to in-situ acoustic propagation data from the East Sea. To investigate the effects of acoustic propagation in random media, scintillation index is adopted and comparison between the measured and numerically simulated data is made.