• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.578-582
• /
• 1994

In this paper reconstructing the internal resistivity and relative permittivity distribution is discussed. The iterative reconstruction method based on Finite Element method and Newton method were used to reconstruct both of resistivity ind permittivity distribution. The Finite Element model of impedance distribution is built in complex field of resistivity and capacitive medium. The reconstruction results based on computer simulated data and experimental data are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.689-692
• /
• 2002

Composite materials, when damaged under thermal or mechanical loadings, show property changes. Among many mechanical properties of composite materials. the stiffness tend to be reduced due to micro-cracking, debonding, or delamination caused by external loadings. This research presents results regarding the detecting technique of internal damages within composite that experienced low-velocity impacts. Post-damage evaluations were made experimentally using flexural and compression loadings. Preliminary finite element analysis was made and compared with analytical solutions. The experimental results to determine the degree of damage will be compared with finite element results.

• 한국전자파학회논문지
• /
• 제19권8호
• /
• pp.906-912
• /
• 2008

1.5 cc 이하의 안테나 체적을 갖는 소형 안테나의 이득을 향상시킬 수 있는 3차원 구조의 휴대폰 내장형 안테나를 설계하고 이를 제작하였다. 소형 안테나 경우, 공진을 위해서 안테나를 복잡하게 구부리게 된다. 이러한 구부림은 전류 상쇄 작용을 발생시킴으로써 결국 이득 감소를 초래한다. 본 연구에서는 안테나의 구부림을 최소화하여 전류 상쇄를 줄였다. 짧은 안테나 길이의 보상과 방사 소자로의 동시 역할을 위해 헤릭스 소자를 사용하였다. 타당성을 입증하기 위하여 1.5 cc 체적으로 설계한 안테나를 프레스 공법으로 제작하여 2중 대역 휴대폰에 적용하였다. 측정 결과, GSM/USPCS 대역에서 슬라이드 다운 및 업일 때 효율과 이득은 각각 최대 27.73 %, 46.84 % 및 0.29 dBi, 2.27 dBi로 소형임에도 불구하고 양호한 특성이 나타났다. 방사 패턴은 2대역 모두 H-면 전방향성 특성을 보였다.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.163-172
• /
• 2000

In this study, the scattered far-field due to a cavity embedded in infinite media subjected to the incident SH-wave was calculated by the boundary element method. The effects of cavity shape and distance between internal cavity and internal point in infinite media were considered. The scattered far-field of the frequency domain was transformed into the signal of the time domain by using the Inverse Fast Fourier Transform(IFFT). It was found that the amplitude of scattered signal in time domain decreased with the increase of the distance between the detecting points of ultrasonic scattered field and the center of internal cavity in media. In addition, the time delay was clearly found in time domain waveform as the distance between the detecting points of ultrasonic scattered field and the center of internal cavity was gradually increased.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1099-1106
• /
• 2002

This paper provides engineering J-integral and crack opening displacement (COD) estimation equations for circumferential through-wall cracked pipes under internal pressure and under combined internal pressure and bending. Based on selected 3-D finite element calculations for the circumferential through-wall cracked pipes under internal pressure using the idealized power law materials, the elastic and plastic influence functions for fully plastic J-integral and COD solutions are found as a function of the normalized crack length and the mean radius-to-thickness ratio. These developed GE/EPRI-type solutions are then re-formulated based on the enhanced reference stress method. Such re-formulation not only provides simpler equations for J-integral and COD estimations, but also can be easily extended to combined internal pressure and bending. The proposed equations are compared with elastic-plastic finite element results using actual stress-strain data, which shows overall excellent agreement.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.135-141
• /
• 2009

The bearing clearance is influenced by shrink fit and thermal expansion during operation. The designer must take into account the reduction of clearance after installation to the interference fits, and thermal expansion must be considered. The purpose of this study is to grasp the internal clearance variation and behavior of a bearing which is a deep connected with fatigue life of bearing and performance of spindle through FEM(Finite Element Method). Finite element analysis is performed by using commercial code ANSYS according to variation of thermal condition and rotational speeds. This paper presents correct negative internal clearance according to temperature during operation. Furthermore, interrelation between thermal expansion and contraction are presented to maintain adequate contact force for three type of spindle system (HSK-A60, HSK-40E, HSK-32E). The influence of the centrifugal force and Internal clearance variation of bearing is studied to operating rotational speed.

• 한국전자파학회논문지
• /
• 제14권6호
• /
• pp.550-557
• /
• 2003

본 논문에서는 GPS/PCS 단말기에 적합한 두 가지 형태의 듀얼밴드 내장형 안테나를 제안하였다. 먼저 기생 다이폴이 포함된 모노폴 안테나는 단말기 기판에 직접 인쇄가 가능하도록 설계하였고, 격자형 루프구조의 안테나는 단말기의 내부 공간을 최대한으로 활용하기 위하여 격자형으로 구부러진 형태로 디자인하여 단말기 내부 에 내장이 가능하도록 설계하였다. 제안된 두 가지 형태의 듀얼밴드 내장형 안테나의 대역폭은 정재파비 2:1 기준으로 최소 19.1 % 이상으로 GPS 대역과 PCS 대역을 동시에 만족할 수 있고 전 대역에서 -0.4 ㏈i~3.33 ㏈i의 만족할만한 이득을 얻었으며 방사패턴은 전 방향성에 가까움을 확인하였다.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.144-149
• /
• 2015

This study aims to quantitatively evaluate failure pressure of wall-thinned elbow under combined load along with internal pressure, by conducting real-scale burst test and finite element analysis together. For quantitative evaluation, failure pressure data was extracted from the real-scale burst test first, and then finite element analysis was carried out to compare with the test result. For the test, the wall-thinning defect of the extrados or intrados inside the center of 90-degree elbow was considered and the loading modes to open or close the specimen maintaining a certain load or displacement were applied. Internal pressure was applied until failure occurred. As a result, when the bending load was applied under the load control condition, the intrados of the defect was more affected by failure pressure than the extrados, and the opening mode was more vulnerable to failure pressure than the closing mode. When the bending load was applied under the displacement control, it was hardly affected by failure pressure though it was slightly different from the defect position. The result of the finite element analysis showed a similar aspect with the test. Moreover, when major factors such as material properties and pipeline thickness were calibrated to accurate values, the analytical results was more similar to the test results.

• 대한약침학회지
• /
• 제16권4호
• /
• pp.49-53
• /
• 2013

The purpose of this study was to report the effect of a combination of Sa-am five-element acupuncture and eight-principle pharmacopuncture (EPP) for the treatment of an essential tremor (ET). This study reviewed the medical records treated at OO Korean medical hospital for ET by using diverse types of acupuncture without herbal medicine, other types of physical therapy, and western medication related ET or Parkinson's disease and was performed after the approval of the institutional review board (IRB). The three cases that were finally selected were then extracted and reviewed. The three cases that were finally selected involved three women in their 70s to 80s. The evaluation of the progress was made by using the numeric rating scale. A combined treatment, the method of liver excess (肝乘格), from among Sa-am five-element acupuncture, and Hwangyeonhaedoktang EPP at CV23 and CV17, was applied to all cases. In all three cases, the ET was improved, and recurred ETs improved with the same treatment. The results suggest that the combined treatment of Sa-am five-element acupuncture and Hwangyeon-haedoktang EPP may be effective for treating an ET, even though this conclusion is based on only three cases.

• 대한조선학회지
• /
• 제23권4호
• /
• pp.11-18
• /
• 1986

The fundamental theory and application of boundary element method for two-dimensional problem are introduced in this paper. Based on this boundary element procedure, several numerical calculations such as circular cavity problem, a thin plate with hole under tension and a long thick-walled cylinder under internal pressure are performed. The numerical results show fairly good agreement with exact solutions or results of finite element method.