• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1913-1914
• /
• 2006

Modem Industrial control systems tend to adopt a variety of intelligent wireless device controllers to interface front-end computers with active components of the industrial device. Some of the intelligent control systems come equipped with a wireless SMS(Simple Message Service) interface giving an opportunity to use fault alarm Interlock system. Immediately send warning or alert messages to Mobile devices or remote users. Real time monitoring the SMS systems by Mobile devices. Control systems remotely by mobile devices in emergency situation. In order to provide against system fault, SMS Mobile System will enable system administrator to promptly access, monitor and control the system whenever users want and wherever users are, by utilizing wireless Internet and mobile devices. This paper presents the Mobile SMS system for PAL Control System.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.585-590
• /
• 1999

There is still a lack of knowledge and modelling relating to shear behaviour in reinforced concrete beams. The reason is that shear loading leads to complicated physical mecanisms, such as interlock action, dowel action, etc. Therefore, It is difficult that we make the ideal model of shear behaviour, while Truss model theory has been made good use of shear design because of simplicity and reasonableness. In this study, 6 T-type reinforced concrete beams were designed and made based on the two truss models, i.e, the plasticity truss model and the compatibility truss model, to observe shear strength of concrete and stress distribution of stirrups. 6 beams test pieces were tested with the following testing parameters. 1) specified concrete strength ; 270kg/$\textrm{cm}^2$, 400kg/$\textrm{cm}^2$ 2) with and without the steel fiber.

• 한국정보통신학회논문지
• /
• 제16권8호
• /
• pp.1625-1630
• /
• 2012

현재 무선 네트워크 사이에서 표준화된 통신방식이 정해져 있지 않아 이기종간의 기기들 사이의 원활한 통신 연결이 이루어지고 있지 않다. 다양한 무선 접속망의 출연과 함께 서로 다른 두 개 이상 통신기술들의 연동에 관한 필요성이 대두되고 있으며, 사용자의 단말 역시 다양한 접속망을 통하여 끊김 없는 서비스를 이용할 수 있도록 다중 인터페이스 단말의 형태로 발전하고 있다. 본 논문에서는 이기종 망간 서로 다른 접속 기술 간의 이동성에 관한 알고리즘을 비교 연구하고자 한다.

• 대한가정학회지
• /
• 제32권1호
• /
• pp.93-102
• /
• 1994

The purpose of this study was to investigate the suitability of several knit fabrics for the hadicapped children's slacks. After the observation and wearing test abrasion resistance pilling liquid water transport properties and heat transport properties of the fabrics were tested. As specimens cotton/polypropylene interlock knits and sweat absorbent polyester knit fabric were selected and compared to the cotton denim and wool fabrics. As a result of observation test importance of extensibility durability and comfort related properties were recognized. Through the wearing test depending on the handicap type and orthoses different location and grade of pilling were observed. Knit fabrics used in this experiment were as durable as woven fabrics and showed excellent heat and liquid water transport properties. It was concluded therefore that cotton/polypropylene and sweat absorbent polyester knit fabrics are suitable materials for handicapped children's slacks.

• 한국기계가공학회지
• /
• 제4권4호
• /
• pp.48-53
• /
• 2005

This research is materialized the mechanism of a interlocking elevator device to meet with customer's requirement demanding a variety of function. On this suitably theoretical translation and by considering of material significance of the most factor's tension spring and torsion spring, it's compared and reviewed the stress's calculation according that SWC and SWPB applied differently. And also that is approved through actual experiment. Out of a variety of feasible movement. Torque Balance is materialized by combination of tension spring, torsion spring and disk spring. So that application of 3 factors for optimal design is very important factor. In future, this research thesis make sure to play a highly role for application and improvement mechanically in various industry sector out of materializing interlock.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.39-42
• /
• 1995

A new methodology for representing the interaction between machines and the interlock signals required in FMCs has been developed. Object-Oriented Philosophies (OOPs) lend themselves to the development of such a scheme. A methodology developed here regards the tasks to be performed by the cell or any of its constituent machines for being primal. Sensory signals indicating the changes of state pf machines are used to trigger or initiate tasks. A task may be simple and require a relatively short time to execute, or may be complex and lengthy. This methodology may be depicated by a set of diagrams called Task Initiation Diagram (TID) and their accompanying rules.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.527-532
• /
• 2000

Cracks in reinforced concrete members are important element in structural analysis and design. It is clear from the test results that shear strength of cracked member is remarkably degraded compared with uncracked one. However, considerable amount of shear resistance by such mechanisms as aggregate interlock and dowel action is still active. There are various approaches to shear transfer estimation including finite element analysis, fracture mechanics, upper bound theory of plasticity, etc., but working out comprehensive and consistent models and manageable equations is rather difficult and remains to be improved. Shear transfer problems under cyclic loading and effective compressive strength of cracked concrete have not been adequately investigated and need further systematic research.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1011-1015
• /
• 2005

Fully digital controlled 20-bit magnet power supplies have been developed and successfully tested for closed orbit correction of PLS(Pohang Light Source). The new digital power supply has used fiber optics for 25kHz switching of IGBT drivers, and implemented DSP, ADC, Interlock, DCCT cards in a compact 3U-sized 19" chassis. Input/Output low-pass filters suppress harmonics of 60Hz line frequency and switching frequency noise effectively. Overall performance of the power supplies have been demonstrated as +/- 2ppm short-term stability(<1 min), and +/- 10ppm long-term stability(<36 hours). All the existing 12-bit 70 power supplies for vertical correction magnets will be replaced with new digital power supplies during 2005 summer shutdown period. In this paper, we will describe the hardware structure and control method of the digital power supply and the experimental results will be shown.

• 한국농공학회지
• /
• 제43권6호
• /
• pp.187-196
• /
• 2001

In this study, by using the natural language processing of the field of artificial intelligence, automated index was performed. And then, the Natural Language Processing Interface for knowledge representation(NALPI) has been developed. Furthermore, the DEsign KnOwledge DataBase(DEKODB) has been also developed, which is designed to interlock the knowledge base. The DEKODB processes both the documented design-data, like a concrete standard specification, and the design knowledge from an expert. The DEKODB is also simulates the design space of structures accordance with the production rule, and thus it is determined that DEKODB can be used as a engine to retrieve new knowledge and to implement knowledge base that is necessary to the development of automatic design system. The application field of the system, which has been developed in this study, can be expanded by supplement of the design knowledge at DEKODB and developing dictionaries for foreign languages. Furthermore, the perfect automation at the data accumulation and development of the automatic rule generator should benefit the unified design automation.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
• /
• pp.808-811
• /
• 2006

디지털 액자 또는 디지털 앨범은 여러장의 디지털 이미지를 저장 장치에 저장하여 LCD를 통해 디지털 이미지를 감상할 수 있는 임베디드 장치로 저장 장치에 기록되어 있는 이미지나 네트워크와 통신이 된다면 이미지 서버와 1:1 통신으로 지정된 이미지를 다운받을 수 있다. 이러한 1:1 통신의 이미지 다운로드 방법은 액자에서 액자로 이미지를 전송하거나 다운받을 수 없으므로 원격지의 디지털 액자로 자신이 원하는 이미지를 전송할 수 없는 불편함이 있다. 이에 본 논문에서는 자신의 디지털 액자에서 원격지의 디지털 액자 또는 원격지의 디지털 액자에서 자신의 디지털 액자로 선택한 이미지, 또는 전송받는 이미지를 송수신 할 수 있는 디지털 전자액자의 n:m 연동 방법을 제안한다. 본 논문에서 제안한 방법은 범용 이미지 서버와 디지털 전자액자에 에이젼트를 사용하여 디지털 전자액자와 원격지 디지털 전자액자의 이미지 공유가 가능할 수 있다.