• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.93.1-93.1
• /
• 2008

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.151-153
• /
• 2007

Recently study on components for a electric golf car and a utility car driven by a electric motor has been performed actively, and the study on a drive motor, a inverter and a battery focuses on a small, light weight and high power density source to improve fuel efficiency using limited electric energy. Especially, since a utility car such as a golf car performance depends on initial acceleration and maximum speed capability, a drive system requires high power and large and wide operation area, This study therefore investigates on the interior permanent magnet synchronous motor with high power density and wide operation, and is verified with the test result after design and characteristic analysis is performed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.96-98
• /
• 2009

This paper propose a method to detect the rotor position of IPMSM(Interior permanent magnet synchronous motor) at standstill without a position sensor. The proposed method is based on current variation caused by the magnetic saturation of stator core as rotor position. By choosing an appropriate voltage vector and applying it to phase winding, it enables the algorithm to discern between a north pole and south pole, and subsequently estimates an absolute position. This method dose not depend on the model of the motor and the motor parameter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.50-52
• /
• 1993

In this paper the speed control of Interior Permanent Magnet Synchronous Motor (IPMSM) is presented using sliding mode control. Recently in the control of the motor, various modern control theories are used. Sliding mode control is one of these, which has been spotlighted in the area of the motor drive. By using sliding mode control as the speed controller of IPMSM, the superior performances, which are the fast dynamic responce without overshoot the robustness to the external load disturbance and the alleviation of the chattering, are attained.

• 한국자기학회지
• /
• 제6권4호
• /
• pp.258-263
• /
• 1996

매입형 영구자석 전동기는 d, q축 인덕턴스의 차이로 인해 출력이 자석 토크와 릴럭턴스 토크의 합성토크로서 나타난다. 본 논문에서는 등가자기회로법으로 계산된 공극 자속밀도와 d, q축 인덕턴스를 유한요소법을 이용하여 식을 보정하였다. 전동기의 효율을 목적 함수로 채택하였으며 유전 알고리즘(genetic algorithm)을 이용하여 최대 효율을 갖는 전동기를 설계하였다. 그리고, 설계된 전동기의 타당성을 기존의 전동기와의 비교를 통해 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1025-1026
• /
• 2007

Recently study on components for a electric golf car and a utility car driven by a electric motor has been performed actively, and the study on a drive motor, a inverter and a battery focuses on a small, light weight and high power density source to improve fuel efficiency using limited electric energy. Especially, since a utility car such as a golf car performance depends on initial acceleration and maximum speed capability, a drive system requires high power and large and wide operation area, This study therefore investigates on the interior permanent magnet synchronous motor with high power density and wide operation, and is verified with the test result after design and characteristic analysis is performed

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.74-76
• /
• 2011

Interior permanent-magnet synchronous motors (IPMSMs) produce both magnetic and reluctance torques. The reluctance torque is due to the difference between the d- and q-axis inductances based on the geometric rotor structure. The steady-state performance analysis and precise control of the IPMSMs greatly depend on the accurate determination of the parameters. The three essential parameters of the IPMSMs are the armature flux linkage of the permanent magnet, the d-axis inductance, and the q-axis inductance. In the basic design step of an IPMSM, the inductance parameters are very important for determining the motor characteristics, such as the input voltage, torque, and efficiency. Thus, it is very important to accurately estimate the values of the motor inductances. The inductance parameters of IPMSMs have nonlinear characteristics along the magnet size because the iron core is saturated by the magnet and armature reaction fluxes. In this study, the inductance parameters were calculated using both the magnetic-equivalent-circuit method and the finite-element method (FEM). Then the calculated parameters were compensated by the saturation coefficient function, which was also calculated via the magnetic-equivalent-circuit method and FEM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.121-123
• /
• 1997

A novel flux-weakening scheme for the Interior Permanent Magnet Synchronous Motor (IPMSM) is proposed. This is implemented based on the output of the synchronous PI current regulator-reference voltage to the PWM inverter. Attractive features of this flux weakening scheme include no dependency on the machine parameters, the guarantee of current regulation at any operating condition, and smooth and fast transition into and out of the flux weakening mode without a discontinuity. Experimental results are presented to verify the feasibility of the proposed control scheme.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.417-418
• /
• 2020

효율 및 내환경성에서 우수한 성능을 갖는 매입형 영구자석 동기전동기(IPMSM, Interior Permanent Magnet Synchronous Motor)는 최근 철도차량용 견인전동기로서 주목받고 있다. 일반 도시 철도차량의 추진제어시스템은 장시간 연속 운행 및 자연통풍냉각 방식의 설계가 요구되므로 대전력 스위칭으로 인한 발열 문제가 고려된 낮은 스위칭 주파수 및 6-스텝 제어 아래 인버터의 고성능 제어가 필요하다. 따라서 본 논문에서는 6-스텝 및 낮은 스위칭 주파수로 IPMSM을 제어하기 위한 PWM(Pulse Width Modulation) 동기화 방법을 기술하고 시뮬레이션을 통하여 제어 성능을 검증하였다.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.604-614
• /
• 2012

This paper presents a comparative study of position sensorless control schemes based on back-electromotive force (back-EMF) estimation in permanent magnet synchronous motors (PMSM). The characteristics of the estimated back-EMF signals are analyzed using various mathematical models of a PMSM. The transfer functions of the estimators, based on the extended EMF model in the rotor reference frame, are derived to show their similarity. They are then used for the analysis of the effects of both the motor parameter variations and the voltage errors due to inverter nonlinearity on the accuracy of the back-EMF estimation. The differences between a phase-locked-loop (PLL) type estimator and a Luenberger observer type estimator, generally used for extracting rotor speed and position information from estimated back-EMF signals, are also examined. An experimental study with a 250-W interior-permanent-magnet machine has been performed to validate the analyses.