• KIEAE Journal
• /
• 제15권1호
• /
• pp.29-43
• /
• 2015

Shared housing for elderly people, where several elderly people live together, gains attention as a means to prevent the lonely death of elderly people and continuously maintain their social relations. The purpose of this study is to compare the characteristics planned through rural and urban areas-residing elderly people's participation in the shared housing spatial composition by area. This study conducted a small scale workshop panel method that targeted small group, but through which extensive information can be acquired, as a qualitative method. This study targeted 16 elderly people aged 65 and over living in rented apartments in rural and urban areas by dividing them two groups by area, namely into four groups. A total of 12 workshop sessions were held with three sessions at a time through a certain time interval. As a result of the study, the elderly people showed positive responses to the shared housing, irrelevant of area. As time went on, the workshop panel method's effect was revealed through consolidated positive attitude and agreement of different opinions. The shared housing for elderly people is valuable as a residential alternative for elderly people, and differentiated supply of the shared housing for elderly people, according to residential area's characteristics, is suggested.

• 한국디지털건축인테리어학회논문집
• /
• 제12권1호
• /
• pp.81-88
• /
• 2012

According to the survey results of the Ministry of Land, Transport and Maritime Affairs in the end of December 2011, the residential buildings was reported as 67.3% of 4,529,464 buildings. Reflected in the national energy policy, the residential building is expected that greater energy savings. To have realized the Passive House Project used the Autoclaved Lightweight Concrete(ALC) material on exterior wall, we take advantage of a very large energy savings. Therefore, this study investigate the patent documents of three major companies, SUMITOMO, CLION, ASAHI KASEI, in Japan. and analyze technical flow and benchmarking patent. As a result, the Sliding method or the Rocking method of ALC panels how to install is to be superior to high-performance drift and safety by a earthquake. And the embedded anchor in panel needs to improve the shape and the strength of bearing. Thus installation technology of the ALC exterior wall investigated in japanese patent documents is expected to the fastening units and anchors.

• 한국디지털건축인테리어학회논문집
• /
• 제11권3호
• /
• pp.35-42
• /
• 2011

The exterior system of buildings, which is the typical curtain wall, has been made with glass and metal. Theses materials, however, have weaknesses such as inadequate insulating quality, short durability, combustibility and toxic substance. On the other hand, Autoclaved Aerated Concrete(AAC) or Autoclaved Lightweight Concrete(ALC) possess the great energy efficiency and the superb insulating quality as substitute of existing exterior system materials. In this research, strength characteristics and bubble dispersion of hydrothermal synthesis process of AAC based on CaO/$SiO_2$(C/S) ratio are analyzed. C/S ratio is determinated and bubble distribution and compressive strength are studied through the test of varied water-to-solid mineral ratio(W/S). In hydrothermal synthesis program, final C/S ratio is determined as 0.7 consider of the manufacturing process and hydrothermal synthesis is done at $180^{\circ}C$ for 7 hours. The analysis shows slurry has about 2,300cP viscosity and 0.56 specific gravity therefore it is expected AAC has the appropriate facility in the manufacturing process and Hydrates of AAC's Expansion.

• 한국주거학회논문집
• /
• 제26권5호
• /
• pp.45-52
• /
• 2015

Following natural disasters, there is a need to develop temporary housing through the rapid installation of mass-produced prefabricated housing. This study has developed a model construction manual for prefabricated temporary housing installable in underground spaces. First, the temporary housing prototype was drawn based on opinion poll results from earlier studies. $4.32m^2$ was calculated as the basic unit of the temporary housing living space for one person. Units included panel type, box type and mixed-type, for a variety of field conditions and scales. In order to enable space expansion and movement desirable to the user, the prototype was combination of panel and box types. The drawn prototype was utilized as the basic design template for producing prototypes and for the manual. Second, the possibility of utilizing subway stations as temporary housing was verified through the production of the prototype, and the construction process was summarized in the manual. The manual was developed in the form of a checklist to provide a guideline for users to build with prefab materials.

• Earthquakes and Structures
• /
• 제19권5호
• /
• pp.315-329
• /
• 2020

Through bolt connections in Concrete Filled Steel Tubes (CFSTs) has been proved to be good in terms of seismic performance and constructability. Stiffened extended end plate connection with full through type bolt helps to avoid field weld altogether, and hence to improve the quality of joints. An experimental study was conducted on the hysteretic performance of square interior beam-column connections using flat extended end plates with through bolt. The study focuses on the effect of the bond between the tie rod and the core concrete on the cyclic performance of the joint. The study also quantifies how much the interior joint is getting strengthened due to the confinement effect induced by bi-directional bolting, which is widely used in 3D moment resisting frames. For a better understanding of the mechanism and for the prediction of shear capacity of the panel zone, a mathematical model was generated. The various parameters included in the model are the influence of axial load, amount of prestress induced by bolt tightening, anchorage, and the concrete strut action. The study investigates the strength, stiffness, ductility, and energy dissipation characteristics. The results indicate that the seismic resistance is at par with American Institute of Steel Construction (AISC) seismic recommendations. The bidirectional bolting and bond effect have got remarkable influence on the performance of joints.

• 한국항공운항학회지
• /
• 제20권3호
• /
• pp.44-50
• /
• 2012

The noise reduction is important one of considerations in the process of a civil aircraft development program. External noise sources are classified into an air-born source and a structure-born source. Among these noise sources, the most affected noise source into a cabin is the air-born noise source from an engine or propeller. The external noise is transmitted into the cabin through the fuselage structure of airplane which are composed of an fuselage structure, an interior trim panel and an acoustic insulation layer between an fuselage structure and an interior trim panel. Therefore, appropriate fuselage structure and acoustic insulation layer is very important to reduce the internal noise level. In this paper, the vibro-acoustic coupled analysis of the cabin noise of the 80~90 seats regional turboprop aircraft is carried out to validate the acoustic analysis method using Direct BEM and FEM. The sound pressure level onto the fuselage skin is acquired by fan-source noise analysis using BEM, and which sound pressure is used as acoustic noise source in vibro-acoustic noise analysis for cabin noise analysis using FEM.

• 대한산업공학회지
• /
• 제33권4호
• /
• pp.393-401
• /
• 2007

Affective aspects of design attributes such as color, Pattern, and texture are important to the overall impression and the success of interior products. Among all the interior materials, wallpapers and flooring materials take up largest construction area and they are main components in creating affective impression for customers. This study aims to investigate the relationship between luxuriousness and related affective variables and design elements of wallpapers and flooring materials. The approach consists of 3 steps: (1) selecting related affective features and product design attributes through a literature survey, opinion of expert panel, and focus group interview, (2) conducting evaluation experiments, and (3) developing Kansei models using multivariate statistical analysis and analyzing critical attributes. Evaluation experiment was conducted using a questionnaire made up of 7-point scale and 100-point scale and 30 housewives and 20 interior designers participated in the evaluation experiment. The result of evaluation was analyzed through principal component regression and quantification I analysis. As a result of analyzing the survey data, the relationship between luxuriousness and related affective features and product design attributes was identified, moreover a optimal combination of the design component was identified. Consequently, it is expected that the results of the study would be a basis of the concept of emotion-based design by giving insights about how customers perceive the luxuriousness and suggesting the optimal combination, and providing specific quantitative design guidelines.

• 한국화재소방학회논문지
• /
• 제22권2호
• /
• pp.30-37
• /
• 2008

건축용 바닥재의 화재예방을 위하여 국제규격으로 정해져 있는 바닥재 시험평가 방법인 KSISO 9239-1을 이용하여 각종 바닥재에 대한 연소성 시험을 복사열 판넬 시험기를 사용하여 실시하였다. 복사열 판넬 시험기를 이용하여 각종 바닥재에 대한 화염 전파거리, 임계 열류량 그리고 연기 발생농도 측정하였다. 측정결과 바닥재의 구성 물질 별로 서로 다른 연소특성을 나타내었으며, 바닥재의 표면 재질 및 구성성분이 열 방출과 연기 발생량에 있어 중요한 영향을 미치게 된다는 것을 확인할 수 있었다. 위의 평가방법은 화재위험성을 연구하는데 중요한 인자인 임계 열류량, 연기 발생량 및 화염 전파거리를 정량적으로 평가하는 중요한 시험방법임을 알 수 있었고 국내 건축용 바닥재 화재평가 방법을 국내실정에 맞게 제정 및 적용하는 것이 적합할 것으로 판단되었다.

• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.414-420
• /
• 2013

Research on decreasing the weight of composite sandwich panels is in progress. This paper reports the experimental results for the mechanical behavior of a composite sandwich panel. The skins of sandwich panels were made of glass fiber sheets and plywood matrix composites. Their interior layers consisted of glass fiber pultrusion pipes and gold foam. Experimental tests were performed to obtain the mechanical properties and complex mechanical behavior. Before fatigue tests, tensile tests and 3-point bending tests were carried out to obtain the optimal design and determine their strength and failure mechanisms in the flat-wise position. After the static test, a fatigue test were conducted at a load frequency of 5 Hz, stress ratio (R) of 0.1, and endurance limit for the S-N curve. It showed that the failure modes were related to both the core design and skin failure.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.35-41
• /
• 2008

Qualitative enhancement of dwelling life has changing the recognition for the environment friendly wood which is being highlighted for its usage as an interior materials. This trend may prove the excellent performance of wood whose inherent characteristics has its comfortable, mild feeling of material, sound resistance and stabilities and the market of interior woods including floor, moulding and wooden panel as finishing interior materials is growing sustainably. However, since this materials is vulnerable to humidity and flame, waterproofing and flame retarding stability, an essential condition for interior materials, together with maintenance, are the main topics to be resolved. From the above-mentioned results, as a result of waterdrop contact angle, wood absorption volume and water content percentage test and the performance test of the processed materials after flame retardant, though there was some submerging time changes among types of woods for ensuring waterproofing performance improvement but as time passes, similar tendency was noticed to be formulated. As the submerging time is increased, so does the absorption volume and accordingly optimal level of range is judged to be drawn in order to ensure excellent performance, taking optimal economy into consideration. Therefore, it is considered that above-mentioned woods could be utilized for waterproof and flame retardant processed interior materials using uniform microwave and in order to put this technology into practical application, a research by way of diversified performance proving is required to be carried out.