• 감성과학
• /
• 제6권2호
• /
• pp.1-7
• /
• 2003

본 연구에서는 인간의 감성에 반응하는 디지털 벽면을 통하여 색채 감성 반응에 대한 연구를 목표로 한다 사용자의 감성 반응에 대한 연구 단계로는 첫째, 감성 어휘에 따른 반응을 조사한다. 둘째, 감성어휘에 따라 색채 배색의 데이터를 형성한다. 셋째, 자동적으로 가상공간에서 사용자의 감성어휘에 따라 색채감성공간을 연구한다. 건축공간의 물리적 특성의 한계에서 유동적인 감성반응 환경의 요구를 충족시키는 데에는 많은 한계점이 따른다. 그래서, 본 연구에서는 이러한 한계점을 극복하기 위해 디지털 환경을 이용한 가상공간에서 실행하였다. 이는 실제공간에서의 시행착오를 줄일 수 있을 뿐만 아니라 빠른 시간 내에 인간의 반응을 연구할 수 있다. 특히, 본 연구에서는 감성반응의 실내배색에 의해 실내공간에서의 디지털 벽면의 디자인을 가상공간에서 개발하여 거주자의 감성 반응을 평가하는 것을 연구 목적으로 두었다. 이와 같은 거주자의 감성반응형 환경 디자인은 미래의 디자인의 패러다임이 될 것이다.

• 한국광물학회지
• /
• 제18권4호통권46호
• /
• pp.237-248
• /
• 2005

[ $Mg_{2}SiO_{4}{-}$ ]스피넬에서 올리빈으로의 역상변이에 대한 고온 X-선 회절실험 결과, 진공상태에서 가열하였을 때 상변이가 일어나며, 일정한 온도에서 스피넬상으로부터 올리빈상이 시간이 경과하면서 성장하는 것으로 보아 상변이 메커니즘은 '핵생성 및 성장' 형태인 것으로 판단된다. 스피넬 상으로부터 올리빈 상으로 역상변이 할 때의 활성화 에너지를 구하기 위해 $Mg_{2}SiO_{4}{-}$스피넬 시료에 대한 상변이 실험을 진공 및 고온($1023\∼1116\;k$)에서 시행하였다. 올리빈 상에 대해 '주어진 시간에 따른 비분율법'을 이용하여 활성화 에너지 값을 결정하였다. 아브라미 방정식을 이용하여 계산한 결과, n값은 대체로 온도가 증가함에 따라 매우 넓은 영역에서 동반 상승하는데, 이러한 현상은 '핵생성 및 성장' 메커니즘이 아마도 온도에 종속적이지 않느냐 하는 것을 제시해주고 있다. 상대적으로 낮은 온도에서는 $Mg_{2}SiO_{4}{-}$스피넬은 핵이 생성된 자리가 포화된 후, 새로운 결정상이 표면에서 성장을 시작하고 시간이 지남에 따라 내부 쪽으로 옮아가는 것으로 판단된다. 그러나 고온에서, 성장은 핵이 생성된 자리가 포화되고 난 후 표면뿐만 아니라, 내부에서도 동시에 시작되는 것으로 보인다.

• 자원리싸이클링
• /
• 제12권5호
• /
• pp.16-22
• /
• 2003

폐 PET 병을 재가공하여 콘크리트용 경량골재(LAPET)로 제조하였으며, LAPET의 품질 및 LAPET사용 모르터의 물성에 대하여 검토하였다. LAPET의 비중 및 단위용적 중량이 각각 1.39 및 844 kg/㎥로 강모래에 비하여 매우 작으며, LAPET의 혼합률이 클수록 골재의 비중이 작아지므로 강도가 크게 떨어졌으나, LAPET를 25 및 50%로 혼합한 경우 재령 28일 압축강도는 30 MPa 이상의 강도를 발현하였다. LAPET의 입형은 대부분이 일정한 형대로 둥근 모양을 지니고 있었으며, 표면조직이 매끄러워 모르터의 유동성을 크게 향상시켰다. 한편, LAPET가 단입도로 구성되어 있어 모르터의 모세관 흡수량은 LAPET를 혼합하지 않은 모르터에 비하여 크게 나타났다. LAPET의 내부구조는 유기질 계통의 고분자 재료인 PET로 구성되어 있어 흡수율이 0％이므로 일반 경량골재의 단점을 개선하는 효과가 있었으며, LAPET를 경량콘크리트용 골재로 재이용하게 되면 폐 자원 재활용 및 환경오염을 미연에 방지하는 일석이조의 효과가 기대된다.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.155-164
• /
• 2014

PURPOSES : The purpose of this article is to compare and evaluate the riding comfort of a passenger in tunnels depending on different surface textures of concrete pavement. METHODS : Evaluation of riding comfort is conducted at 17 sections, which have different surface texture such as transverse tinned(TT), longitudinal tinned(LT) and diamond grinded(DG). A triaxial accelerometer was set up on the passenger seat surface of the test vehicle to measure vibrations of an occupant, then the effects of vibration on comfort and health were evaluated by ISO 2631. And microphones were installed at passenger's ears height to measure sound pressure level(SPL) in the test vehicle. Additionally, a surface microphone was installed on the inside of wheel arch to evaluate noise between tire and pavement by NCPX method. All tests were conducted cruising at 100km/h. RESULTS : The results of all tests are as follows. First, both vibration magnitudes for comfort and for health in LT and DG sections are almost same and they represent lower than those in TT sections. Second, the average SPL of DG shows the lowest decibels among them. And third, it is founded that interior noise is significantly affected by noise between tire and pavement. CONCLUSIONS : It may be concluded that DG can provide more excellent riding comfort to passenger than LT or TT. Therefore, it is necessary to consider applying DG to existing pavement surface to improve surface condition when the driving environment especially requires riding comfort like a long tunnel.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제25권4호
• /
• pp.27-35
• /
• 2019

Purpose: As the improvement in quality of medical environment and the spatial consideration for the prevention of infection in the hospital have become increasingly important in the recent years, specific and practical planning for air conditioning room's area has become a major issue accordingly. However, the air conditioning room tends to be discussed focusing on technical factors such as air conditioning systems that are irrelevant to building plans, while discussions of most departments related to the medical functions have actively taken placed. Therefore, this study aims to investigate the factors influencing the planning for the air conditioning room area, and through subsequent analysis of the area of the air conditioning room, to propose a way to improve effective planning for the air conditioning room area. Methods: This study examines the case hospitals that fall into two types: each floor supply system and concentrated supply system, and compares and analyzes the air conditioning room area-related factors and the characteristics of changes in the interior of air conditioning room before and after remodeling through air conditioning floor plan of those case hospitals. Results: The air conditioning room can be classified into the net area of the functional space such as duct passages, and the public area such as aisle space, and of those the public area is an important factor in calculating the area of the air conditioning room. The public area of the air-conditioning room should not be planned considering only the spaces for mobile passage or maintenance activities, but should be planned taking into account internal changes such as expansion and replacement of equipment in the future from the beginning. Implications: When planning a medical facility, it is used as basic data for the planning of the air conditioning room area, which is a significant fixed factor in the initial setting.

• Journal of the Korean Wood Science and Technology
• /
• 제46권6호
• /
• pp.735-747
• /
• 2018

Radon radiation exposures in home have been posed as a potential cancer hazard. This research aims to present the basic data of the indoor radon concentration level by examining the radon exhalation rates of wood species. Radon exhalation rates from five commonly used wood species in Korean wood building construction were measured with Continuous Radon Monitor (CRM), Model 1028 (Sun Nuclear Co., USA) using the Closed Chamber Method (CCM). The mass exhalation rate was observed to vary from $0.00089Bq{\cdot}kg^{-1}{\cdot}h^{-1}$ to $0.00181Bq{\cdot}kg^{-1}{\cdot}h^{-1}$, whereas the surface exhalation rate was observed to be $0.00677-0.01517Bq{\cdot}m^{-2}{\cdot}h^{-1}$. The radon exhalation rate of Quercus accutissima Carruth (white oak) which has the highest density showed the highest figure among the five wood species, on the other hand, the rest of four species showed similar results which were similar to the radon exhalation rates of wood in the U.S.A. and Canada. The average of the concentration measured by the CCM represented well up to the second half-life period (7.7 days). Because result of these small quantities seems to indicate that radon exhalation from the tested wood species has almost negligible impact, the main culprit of the high indoor radon concentration is clearly derived from the background of surrounding wood house. Therefore, as a safety precaution, infrastructures made of wood materials should be designed with the consideration of influx of radon and built accordingly. Furthermore, it is highly desirable that wood will be needed to use for furniture and interior finishing material in indoor environment.

• 한국콘텐츠학회논문지
• /
• 제13권12호
• /
• pp.126-135
• /
• 2013

이 연구의 목적은 인테리어 분야에서 스웨덴의 현대 디자인 발전에 지대한 영향을 미친 스벤스크 텐의 철학과 인본적 기능주의 디자인의 형성과정과 특성을 알아보고자 함이다. 연구를 함에 있어 스벤스크 텐이 형성되던 동시대 건축과 가구디자인의 디자인 패러다임을 연구하고 이 고유의 브랜드가 당시 유럽의 기능주의 디자인의 흐름 속에서 어떻게 스웨디시 모던 스타일의 대표 주자로 자리 잡게 되었는지에 대한 과정을 이론적으로 분석하였다. 이를 토대로 1930년대 이후 스벤스크 텐의 독창적 정체성을 형성하는 데 결정적 기여를 한 요셉 프랭크의 가구 및 텍스타일 디자인을 동시대 스웨덴의 디자인 사례와 비교하여 스벤스크 텐이 실현하고자 한 인본적 기능주의 디자인을 형태적 재료적 측면에서 분석하고 이를 개념화하였다. 이에 대한 결론은 다음과 같다. 1)공간과 요소, 양식과 기능의 유기성, 2)아말감화를 통한 독창적 공간, 3)추상적 패턴을 통한 공간의 열린 감성, 4)공간을 파괴하지 않는 가구의 형태, 5)합리적 기능주의의 한계 극복.

• Structural Engineering and Mechanics
• /
• 제35권1호
• /
• pp.99-117
• /
• 2010

Beam-column joints are the key structural elements, which dictate the behavior of structures subjected to earthquake loading. Though large experimental work has been conducted in the past, still various issues regarding the post-yield behavior, ductility and failure modes of the joints make it a highly important research topic. This paper presents experimental results obtained for eight beam-column joints of different sizes and configuration under cyclic loads along with the analytical evaluation of their response using a simple and effective analytical procedure based on nonlinear static pushover analysis. It is shown that even the simplified analysis can predict, to a good extent, the behavior of the joints by giving the important information on both strength and ductility of the joints and can even be used for prediction of failure modes. The results for four interior and four exterior joints are presented. One confined and one unconfined joint for each configuration were tested and analyzed. The experimental and analytical results are presented in the form of load-deflection. Analytical plots are compared with envelope of experimentally obtained hysteretic loops for the joints. The behavior of various joints under cyclic loads is carefully examined and presented. It is also shown that the procedure described can be effectively utilized to analytically gather the information on behavior of joints.

• Current Research on Agriculture and Life Sciences
• /
• 제25권
• /
• pp.19-23
• /
• 2007

This research to streets at Daegu, and view adjective how people react when draw a bird into interior in city utilize and examine becoming direction of street trees system. Findings on survey, citizens appear by average 2.87 in management degree of street trees and average 2.76 in various of species of trees, discontent thing more or less by average 2.91 in satisfaction of the beauty, and demonstrate high shame from satisfaction for season stuff to comparative high 3.24, generally, citizens appear by there are parts to improve by do dissatisfaction about street trees system at Daegu. Also, street trees 2 lines plantings for a bird is average 3.05, shows affirmative feedback about that shrub utilization for a bird see high numerical value by average 3.4 and people draw a bird to space of city. Therefore, construct street trees friendly to the nature and be considered to need to re-establish set street trees environment in citizens preference to recover city ecosystem. As result that examine reaction which treat in street trees planting programs to draw birds into city through view adjective, Likert scales about 2 lines plantings of street trees and additional planting of shrub show affirmative feedback by average 3.4 both ordinary people and specialist group, if people want to draw birds into city by various of method, various research should be accomplished.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.24-37
• /
• 2007

The Korean Ministry of Environment started controlling indoor air quality (IAQ) in 2004 through the introduction of a law regulating the use of pollutant emitting building materials. The use of materials with formaldehyde emission levels above $1.25 mg/m^2{\cdot}h$ (JIS A 1901, small chamber method) has been prohibited. This level is equivalent to the $E_2$ grade ($>5.0mg/{\ell}$) of the desiccator method (JIS A 1460). However, the $20{\ell}$ small chamber method requires a 7-day test time to obtain the formaldehyde and volatile organic compound (VOC) emission results from solid building interior materials. As a approach to significantly reduce the test time, the field and laboratory emission cell (FLEC) has been proposed in Europe with a total test time less than one hour. This paper assesses the reproducibility of testing formaldehyde and TVOC emissions from wood-based composites such as medium density fiberboard (MDF), laminate flooring, and engineered flooring using three methods: desiccator, perforator and FLEC. According to the desiccator and perforator standards, the formaldehyde emission level of each flooring was ${\le}E_1$ grade. The formaldehyde emission of MDF was $3.48 mg/{\ell}$ by the desiccator method and 8.57 g/100 g by the perforator method. To determine the formaldehyde emission, the peak areas of each wood-based composite were calculated from aldehyde chromatograms obtained using the FLEC method. Formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde and benzaldehyde were detected as aldehyde compounds. The experimental results indicated that MDF emitted chloroform, benzene, trichloroethylene, toluene, ethylbenzene, m,p-xy-lene, styrene, and o-xylene. MDF emitted significantly greater amounts of VOCs than the floorings did.