• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.137-140
• /
• 2011

A precoding strategy is one of the representative interference management techniques in cognitive radio (CR) network which is a typical interference-limited environment. The interference minimization approach to precoding is an appropriate scheme to mitigate the interference efficiently while it may cause the capacity loss of the desired channel. The precoding scheme for the maximal capacity of the desired channel improves the capacity of the desired channel while it increases the interference power and finally causes the capacity loss of the interfered users. Therefore, we propose a precoding scheme which satisfies these two conflicting goals and manages the interference signal in such an interference-limited environment. The proposed scheme consists of two steps. First, the precoder nulls out the largest singular value of the interference channel to mitigate the dominant interference signal based on the interference minimization approach. Second, the transmitter calculates the sum capacities per mode and selects a mode to maximize the sum capacity. In the second step, each mode consists of the right singular vectors corresponding to the singular values except the largest singular value eliminated in the first step. Simulation results show that the proposed precoding scheme not only efficiently mitigate the interference signal, but also has the best performance in terms of the sum capacity in a MIMO-based CR network.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.77-83
• /
• 2012

In this paper, when interference caused by the primary user exists, the capacity performance of the mean value-based power allocation scheme is analyzed and evaluated under the outdated channel environment in spectrum sharing systems. When interference due to the primary transmitter affects the secondary receiver, we derive the upper bound of the ergodic capacity of the mean value-based power allocation scheme in a closed form. Furthermore, based on that, we investigate how interference due to the primary transmitter degrades the ergodic capacity of the secondary user. In simulation results, we show the performance degradation of the secondary user due to interference caused by the primary user. In addition, we show that the region where the mean value-based power allocation scheme outperforms the outdated channel information-based power allocation scheme is reduced as interference by the primary user increases.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.269-273
• /
• 2013

This paper analyzed a potential interference of electric equipments on radio service below 30MHz through an experiment with a PDP(Plasma Display Panel) TV and a RF(Radio Frequency) light bulb in an anechoic chamber. The radiation levels of the PDP TV and the RF light bulb are measured and a combined interference is calculated on the basis of the experimental value. As a result, the combined interference signal level is increased according to the number of interferer. The possibility of a potential interference from electric equipments on radio service below 30MHz is realized through comparison between the measured radiation value of electric equipments and the CISPR(International Special Committee on Radio Interference) 11 limit.

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.63-70
• /
• 2008

Narrow-band interference (NBI) from the coexisting narrow-band services affects the performance of ultra wideband (UWB) systems considerably due to the high power of these narrow-band signals with respect to the UWB signals. Specifically, IEEE 802.11a systems which operate around 5 GHz and overlap the band of UWB signals may interfere with UWB systems significantly. In this paper, we suggest a novel NBI suppression technique based on singular value decomposition (SVD) algorithm in time hopping UWB (TH-UWB) systems. SVD is used to approximate the interference which then is subtracted from the received signals. The algorithm precision and closed-form bit error rate (BER) expression are derived in the wireless multipath channel. Comparing with the conventional suppression methods such as a notch filter and a RAKE receiver, the proposed method is simple and robust and especially suitable for UWB systems.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.1
• /
• pp.139-145
• /
• 2012

This paper shows a novel interference cancellation method of relay utilizing to the CGM algorithm in wireless communication environments. It is a problem that relay have interference cause by feedback signal of it. CGM algorithm obtained weight value that can remove the interference due to feedback signal of relay. In this paper, we confirm that performance of CGM algorithm is far superior with suitable cancellation value to remove the feedback signal. Also, we implement CGM module to verify the real-time processing of CGM algorithm using to DSP. Based on the analysis from computer simulation, it is observed that proposed algorithm is suitable for the relay in time-varying environment.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.179-184
• /
• 2008

This paper presents the design of the feed forward controller to improve on the non-interference control performance of a single PWM converter in parallel for high-speed trains. The feed forward controller is designed to minimize the interference generated by converter switching in parallel operation of PWM converters. The gain value of the feed forward controller is calculated by inductance values of the input transformer. However, it is difficult to decide this gain value exactly because inductance values are changed by the operation condition of an input transformer. In this paper, the proposed design of feed forward controller can exactly decide the gain value using the leakage inductances estimated by detecting the variation of input current. the validity of the proposed feed forward controller is proved through the simulation results.

• Journal of information and communication convergence engineering
• /
• v.3 no.2
• /
• pp.67-71
• /
• 2005

Interference occurs by signals received from directions that were different from the signals of the users in a mobile communication system. Various studies have been undertaken, including diversity, equalizer, etc., in order to reduce interference. In this study, the weighted value of the array antenna was obtained to improve signal-to-noise ratio. The weighted value was obtained as an eigen value and an eigen vector by using the correlation coefficient of the signal. The weighted value obtained was then applied to the CDMA system to increase system performance and capacity. Both QPSK and OQPSK modulation systems were applied to analyze performance.

• Analytical Science and Technology
• /
• v.34 no.5
• /
• pp.225-230
• /
• 2021

Currently, most photoluminescence reagents used in forensic science have short stokes shift, making it difficult to observe strong photoluminescence due to scattering light from forensic light sources when using filters that are not shieldable. However interference filters can be observed near monochromatic light, making them a better alternative to absorption filters. To verify practical applicability of interference filters, interference filters and three other types of previously frequently used absorption filters were observed using a variety of light source products, and transmission light was cross-compared. Interference filters have a lower slope value than absorption filters, and selectively show only the photoluminescence of reagents, regardless of the type of product from the forensic light source. In addition, tilting the angle of the filter surface for observation lowered the λ_cut-on, which could replace various types of absorption filters with a single interference filter.

• Journal of information and communication convergence engineering
• /
• v.19 no.3
• /
• pp.131-135
• /
• 2021

The interference between closely placed co-coverage satellites was analyzed. In general, a satellite network may use different orthogonal polarizations and frequencies to increase the throughput of a satellite. However, when orthogonal linear polarization (horizontal polarization and vertical polarization) or orthogonal circular polarization (left-handed circular polarization and right-handed circular polarization) is used, the signal from one polarization sense to another may be coupled, resulting in cross-polarization interference. This signal-coupling arises due to the finite value of the cross-polarization discrimination of the earth station. In this study, field equations were used to analyze the interference between adjacent satellites using co-frequency. The level of interference was compared to that when two adjacent satellites used the same polarization. The simulation results show that the interference mainly depends on the off-axis co-polar pattern and the cross-polar pattern of the earth station antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1242-1250
• /
• 2008

In this paper, we predicted the radiation field strength from the low power radio devices to force the radio interference on the AMPS receiver. The predicted value of 79.13[$dB{\mu}V/m$] is the upper value of radiation against the intermodulation interference emanated from the low power radio devices. To show the validity of the suggested values theoretical analysis on intermodulation and modeling of the AMPS receiver are performed, and also measurements on the AMPS receiver IC are carried out. The resultant numerals show the good match between them within the allowable tolerances.