• 한국재료학회지
• /
• 제21권2호
• /
• pp.120-124
• /
• 2011

Silicon heterojunction solar cells have been studied by many research groups. In this work, silicon heterojunction solar cells having a simple structure of Ag/ZnO:Al/n type a-Si:H/p type c-Si/Al were fabricated. Samples were fabricated to investigate the effect of transparent conductive oxide growth conditions on the interface between ZnO:Al layer and a-Si:H layer. One sample was deposited by ZnO:Al at low working pressure. The other sample was deposited by ZnO:Al at alternating high working pressure and low working pressure. Electrical properties and chemical properties were investigated by light I-V characteristics and AES method, respectively. The light I-V characteristics showed better efficiency on sample deposited by ZnO:Al by alternating high working pressure and low working pressure. Atomic concentrations and relative oxidation states of Si, O, and Zn were analyzed by AES method. For poor efficiency samples, Si was diffused into ZnO:Al layer and O was diffused at the interface of ZnO:Al and Si. Differentiated O KLL spectra, Zn LMM spectra, and Si KLL spectra were used for interface reaction and oxidation state. According to AES spectra, sample deposited by high working pressure was effective at reducing the interface reaction and the Si diffusion. Consequently, the efficiency was improved by suppressing the SiOx formation at the interface.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.402-405
• /
• 2009

차세대 출판문인 디지로그 북은 기존 서적과 디지털콘텐츠를 통합하여 사용자에게 아날로그적 감성과 디지털오감을 제공한다. 이러한 디지로그 북을 제작하기 위해 디지로그 북의 저작도구에 대한 연구가 진행 중이며, 본 논문에서는 디지로그 북에 사용될 콘텐츠를 저작하는 활동에서 시각과 청각에만 의존한 작업을 보다 실감 있도록 하기 위해 펜형 햅틱 사용자인터페이스를 개발하고자 하였다. 햅틱 사용자인터페이스는 디지로그 북을 저작하는 작업에서 3차원 작업공간에서 공간상에 배치되는 3차원 객체를 이동, 회전, 크기 변경 및 메뉴선택 버튼의 클릭등과 같은 다양한 작업에서 각 작업을 보다 실감 있게 하기 위한 진동 햅틱 효과를 사용자에게 제공한다. 본 연구에서는 이러한 디지로그 북의 저작 환경에 적합한 사용자인터페이스의 외형, 회로 설계, 진동패턴의 설계/내장 및 저작시스템과의 연동을 위한 프로토콜을 정의하고 이렇게 개발된 햅틱 사용자인터페이스를 사용하여 사용자평가를 간단히 실시하였다. 디지로그 북 저작 작업에서 이렇게 개발된 햅틱 인터페이스의 촉각 효과를 시청각정보와 함께 사용함으로써 디지로그 북 저작 작업을 보다 효과적으로 할 수 있기를 기대한다.

• 한국정보처리학회논문지
• /
• 제6권3호
• /
• pp.699-709
• /
• 1999

This paper is aimed at defining items of analysis using SNMP MIB-II for the purpose of managing the Internet based network running on TCP/IP protocol, and then utilize these items, in conjunction with various Web technology and JAVA to design and implement a Web based interface of a management system to analyze the performance and status of the Internet. Among the required items in order to accomplish this task are utilization, interface packet transmission rate, I/O traffic ratio, and so on. Based on these items, the actual analysis is carried out by the Web interface according to the type of analysis. For instance, the interface executes the function of real-time analysis, collection processing, elementary analysis and detailed analysis. The demand of the user is fed into the Web interface which carried out a real-time analysis with the client system which in turn will eventually produce the results of the analysis. In order words, the interface acts as a mediator server for the analysis system. Furthermore, a protocol for exchange of data and messages between the server and the analysis system, the MATP protocol, was also designed. Finally, the results obtained through the system presented in this paper were displayed on screen according to the type of analysis. The system realized in this paper uses We technology and is independent of platform and allows the user to determine the performance of Internet at his/her own host according to the selected items of analysis.

• 가정과삶의질연구
• /
• 제27권1호
• /
• pp.209-219
• /
• 2009

This study identifies the key determinants and technology innovation adoption type of participation in multimedia UCC services. This research examines how the major factors of perceived usability, self-expression, fun & entertainment, arousal, information sharing, other's positive reputation and interface easiness contribute to participation in multimedia UCC services. A sample survey of internet users was conducted, responses were collected from 629 respondents and consumer streaming data were analyzed. Some of the practical implications of the results are follows. This research have categorized that the types of technology adoption for the participation of UCC were innovator consumer, early adaptor consumer, early majority consumer, and late majority consumer. The results of multiple regression analysis indicated that perceived usability, interface easiness, fun & entertainment, self-expression, arousal, other's positive reputation and type of technology adoption posited a significant effect in multimedia UCC Services.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.9-14
• /
• 2017

$ISnO_2$ thin films were prepared on p-type and n-type Si substrates to research the interface characteristics between $SnO_2$ and substrate. After the annealing processes, the amorphous structure was formed at the interface to make a Schottky contact. The O 1s spectra showed the bond of 530.4 eV as an amorphous structure, and the Schottky contact. The analysis by the deconvoluted spectra was observed the drastic variation of oxygen vacancies at the amorphous structure because of the depletion layer is directly related to the oxygen vacancy. $SnO_2$ thin film changed the electrical properties depending on the characteristics of substrates. It was confirmed that it is useful to observe the Schottky contact's properties by complementary using the XPS analysis and I-V measurement.

• 대한인간공학회지
• /
• 제25권4호
• /
• pp.103-113
• /
• 2006

The purpose of this study was to evaluate an effect of the new air traffic control display designed by Ecological Interface Design [EID]. The methodology of EID has not been applied to the development of the air traffic control display so far. To design a new air traffic control display by EID, We implemented Work Domain Analysis about the air traffic control domain and made the Work Domain Model that consisted of the five levels of the Abstraction Hierarchy. We extracted the Information Requirement from the completed Work Domain Model and the extracted information requirements from the model were used to design the new air traffic control display. We evaluated an effect of the new air traffic control display designed by EID. Participants for evaluating consisted of 14 active military air traffic controller of the Republic of Korea Air Force. Experiment was designed two factors within subject. Factors manipulated in the experiment included displays type to compare the existing type with the new ecological interface type and included complexity to compare the effect of the high complex situation with the effect of the low complex situation. Response time about questions with relation to air traffic collision situation, accuracy, and subjective work load were measured. The results reveled that EID type's display has a significant effect on response time, accuracy, and subjective work load and verified that EID could be applied to the air traffic control domain that is more complex and dynamic.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.167-174
• /
• 1999

Numerical analysis of two-fluid flows for both water and air is carried out. Free-Surface flows with an arbitrary deformation have been simulated around two dimensional submerged hydrofoil. The computation is performed using a finite volume method with unstructured meshes and an interface capturing scheme to determine the shape of the free surface. The method uses control volumes with an arbitrary number of faces and allows cell-wise local mesh refinement. the integration in space is of second order based on midpoint rule integration and linear interpolation. The method is fully implicit and uses quadratic interpolation in time through three time levels The linear equation systems are solved by conjugate gradient type solvers and the non-linearity of equations is accounted for through picard iterations. The solution method is of pressure-correction type and solves sequentially the linearized momentum equations the continuity equation the conservation equation of one species and the equations or two turbulence quantities.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.34-40
• /
• 2012

This paper presents an experimental modal analysis of a caisson-type breakwater to produce basic information for the structural health assessment of a caisson structure. To achieve the objective, the following approaches are implemented. First, modal analysis methods are selected to examine the modal characteristics of a caisson structure. Second, experimental modal analyses are performed using finite element analyses and lab-scale model tests. Third, damage scenarios that include several damage levels in a foundation-structure interface are designed. Finally, the effects of damage on the modal characteristics are analyzed for the purpose of utilizing them for damage identification.

• 한국시뮬레이션학회논문지
• /
• 제10권1호
• /
• pp.25-34
• /
• 2001

In this paper, we describe the generation method of interface logic which replace between IP & IP handshaking signal with asynchronous logic circuit. Especially, we suggest the new asynchronous sequential "Waveform to VHDL" code creation algorithm by flow chart conversion : Wave2VHDL - if only mixed asynchronous timing waveform is presented the level type input and pulse type input for handshaking, we convert waveform to flowchart and then replace with VHDL code according to converted flowchart. Also, we confirmed that asynchronous electronic circuits are created by applying extracted VHDL source code from suggest algorithm to conventional domestic/abroad CAD Tool, Finally, we assured the simulation result and the suggest timing diagram are identical.

• Journal of Mechanical Science and Technology
• /
• 제14권7호
• /
• pp.789-795
• /
• 2000

Free-surface flows with an arbitrary deformation, induced by a submerged hydrofoil, are simulated numerically, considering two-fluid flows of both water and air. The computation is performed by a finite volume method using unstructured meshes and an interface capturing scheme to determine the shape of the free surface. The method uses control volumes with an arbitrary number of faces and allows cell wise local mesh refinement. The integration in space is of second order, based on midpoint rule integration and linear interpolation. The method is fully implicit and uses quadratic interpolation in time through three time levels. The linear equations are solved by conjugate gradient type solvers, and the non-linearity of equations is accounted for through Picard iterations. The solution method is of pressure-correction type and solves sequentially the linearized momentum equations, the continuity equation, the conservation equation of one species, and the equations for two turbulence quantities. Finally, a comparison is quantitatively made at the same speed between the computation and experiment in which the grid sensitivity is numerically checked.