• 한국신뢰성학회지:신뢰성응용연구
• /
• 제2권1호
• /
• pp.23-32
• /
• 2002

As the function of digital products gets diverse and complex, more than 30~40% job of software developing and testing group within its development cycle, concentrates on the software testing[1]. To cope with consumers'quickly changing needs, development cycle time gets short, and the number of model and test items increase steadily This is why automating software basic function and UI(User Interface) verification is needed [4][5][6]. This paper draws many strength and weakness defines Input/Output through integrating mobile phone, DVDP, PDA, and Black-Box (Intrusive (mobile) or Non-Intrusive(DVDP, PDA)) testing systematically, which brought above the 64% average of automation rate, and ensure 80% of test coverage [4][5][6].

• 항공우주기술
• /
• 제13권2호
• /
• pp.142-149
• /
• 2014

저궤도위성은 발사 이후 초기 운영[1] 및 검보정 단계를 거쳐 정상 운영 단계로 진입한다. 정상 운영 단계에서는 이상 현상에 대한 대응조치[2], 궤도조정 작업 이외의 대부분 기간 동안 지상국으로부터 임무 명령을 수신하고 영상 촬영 및 전송 임무를 수행하게 된다. 저궤도위성과 지상국 시스템이 모두 관여된 임무수행능력은 저궤도위성 프로그램 성공 판단의 핵심 지표이고, 저궤도위성 프로그램 추진 목적과 일치하는 항목이기 때문에 지상 시험 단계에서 철저한 검증을 통해 신뢰성을 확보해야 한다. 지상 시험단계에서 지상국과 위성의 역할을 검증함으로써 임무수행능력에 대한 신뢰성을 확보하기 위해서는 저궤도위성의 실제 운용 상황과 유사한 시나리오를 작성하고 이를 바탕으로 명령을 생성하여 위성에 전달하며, 영상과 건강상태 텔레메트리(Telemetry) 데이터를 수신하는 등의 임무수행 전체 주기에 대한 검증이 필요하다. 이 논문은 저궤도위성과 지상국간 접속 환경을 활용해 수행된 임무수행능력 지상 검증 시험 설계 및 수행 결과에 대해 다룬다. 시험 설계시 고려되어야 할 항목과 이를 바탕으로 설계된 시험에 대해 상세히 서술하고 결과에 대해 정리하였다.

• Geomechanics and Engineering
• /
• 제8권2호
• /
• pp.283-303
• /
• 2015

To research and analyze the differential settlements of foundations specifically, site investigations of existing railways and metro were firstly carried out. Then, the centrifugal test was used to observe differential settlements in different position between foundations on the basis of investigation. The theoretical model was established according to the stress diffusion method and Fourier method to establish an analytical solution of embankment differential settlement between different foundations. Finally, theoretical values and experimental values were analyzed comparatively. The research results show that both in horizontal and vertical directions, evident differential settlement exists in a limited area on both sides of the vertical interface between different foundations. The foundation with larger elastic modulus can transfer more additional stress and cause relatively less settlement. Differential settlement value decreases as the distance to vertical interface decreases. In the vertical direction of foundation, mass differential settlement also exists on both sides of the vertical interface and foundation with larger elastic modulus can transfer more additional stress. With the increase of relative modulus of different foundations, foundation with lower elastic modulus has larger settlement. Meanwhile, differential settlement is more obvious. The main error sources in theoretical and experimental values include: (a) different load form; (b) foundation characteristics differences; (c) modulus conversion; (d) effect of soil internal friction.

• 대한원격탐사학회지
• /
• 제36권4호
• /
• pp.645-652
• /
• 2020

GK2A(GEO-KOMPSAT-2A)satellite has been operating excellently since its launch in Dec 2018. The secondary payload called KSEM (Korean Space Environment Monitor) was equipped into the GK2A satellite along with AMI (Advanced Meteorological Imager) sensor. KSEM is the Korea's first operational geostationary space weather sensor and has been developed collaboratively by KHU (Kyung Hee University) and KARI (Korea Aerospace Research Institute). The interface works between KSEM and GK2A were conducted by KARI. Various interface tests, which aim for evaluating effective functionality of KSEM with the spacecraft, were intensively conducted at KARI facilities. Main tests consisted of mechanical and electrical check-up activities between the KSEM and GK2A. Interface tests of KSEM, which involve pre-launch tests such as ETB and GK2A system level tests, were conducted to evaluate functional and performance of KSEM before the launch. The tests carried out during the GK2A LEOP (Launch and Early Orbit Phase) and IOT (In Orbit Test) period (Dec 2018 ~ June 2019) showed excellent in-orbit performance of KSEM data.

• 인터넷정보학회논문지
• /
• 제15권5호
• /
• pp.107-121
• /
• 2014

분산 시스템은 물리적으로 분산된 컴퓨터들이 네트워크에 의해 유기적으로 연결된 것을 의미한다. 유무선 인터넷의 보편적인 사용으로 인해 사용자는 언제 어디서나 분산 서비스의 이용이 가능하게 되었다. 분산 서비스의 폭발적인 증가는 서비스의 기능적 측면에서의 검증뿐만 아니라 서비스 품질과 관련된 비기능적 요소의 검증도 강하게 요구하고 있다. 분산 서비스를 검증하기 위해서는 분산 시스템에 맞는 테스트 환경을 구축해야 한다. 하지만 분산 시스템은 물리적으로 분산된 노드로 구성되기 때문에 테스트 환경을 구축함에 있어서 단일 시스템의 테스트 환경보다 많은 노력이 요구된다. 이 논문에서 우리는 분산 시스템의 기능 및 비기능 요소의 검증을 위한 테스트 프레임워크를 제안한다. 제안하는 테스트 프레임워크는 메시지 시퀀스 차트(Message Sequence Chart)를 기반으로 테스트 케이스를 자동 생성하며, 물리적으로 분산된 노드를 흉내 낼 수 있는 가상의 분산 노드로 구성된 테스트 드라이버를 포함한다. 테스트 수행 결과는 다양한 그래프와 GUI를 통해서 쉽게 확인할 수 있다. 이 논문에서 제안하는 테스트 프레임워크를 통해 분산 시스템 테스트에 드는 노력을 감소할 수 있고 시스템의 신뢰성을 향상 시킬 수 있을 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1205-1211
• /
• 2017

한국형발사체 각 단 추진기관시스템의 성능 검증을 위해 나로우주센터에 추진기관시스템 시험설비(PSTC, Propulsion System Test Complex)가 구축되었다. 본 논문은 PSTC 지상설비와 발사체 운용 및 제어를 위해 개발된 통합제어시스템(MCS, Main Control System)의 설계, 개발 현황, 시운전 결과에 관한 내용이다. MCS는 시험대상체와 지상시스템의 인터페이스에 활용될 예정이며, 시험책임자에 의한 시험운용 및 시퀀스 처리를 수행하게 된다. 또한 시험책임자 모의시험운용에도 활용될 예정이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.115_116
• /
• 2009

IEC 61850 based substation automation system mainly consists of a various of protective and control IEDs. In order to implement the system, All of them should require the performance verification of IEC 61850 communication services for the assurance of interoperability throughout the digital network. This paper shows a research result on the testing method of IEC 61850 control communication interface of IEDs according to IED IEC 61850 conformance test procedures.

• 한국철도학회논문집
• /
• 제5권3호
• /
• pp.158-166
• /
• 2002

In this paper, we introduce the software and hardware of the measurement system for on-line testing and evaluation of high speed railway. The test items focus on the verification of the performance and acquirement of the technical data of the high speed railway system. The software controls the hardware of the measurement system, perform the analysis and calculation of measurement data and acts as interface between users and the system hardware. For this purpose, three programs a measuring program, a monitoring program and post-processing program are developed. The detailed test scenario is in the process of development to closely follow the process of development and design of the system.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (A)
• /
• pp.226-228
• /
• 2006

In this paper we describe a simulation and development framework for designing mobile 3D graphics architectures. We are developing a simple and flexible simulation and verification environment (SVE) that uses gITrace's ability to intercept and redirect an OpenGL/ES streams. In combination wlth gITrace to trace OpenGL/ES commands, the SVE simulates the behavior of mobile 3D graphics pipeline during playback of traces, and then produces the second geometry trace that can be used as a test vector for the Verilog/HDL RT-level model. By comparing the frame-by-frame results, we can conduct architectural verification. To demonstrate the functionality of the SVE, we show the implementation of the verified mobile 3D architecture on a FPGA board. For this, we also present an application development environment (ADE) includes a mobile graphics API and a device driver interface (DDI). The proposed two software environments, the SVE and the ADE could be used fer developing and testing mobile applications, architectural study and speculative hardware designs.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.17-26
• /
• 2023

A forklift is an industrial vehicle that lifts or transports heavy objects using a hydraulically operated fork, and is equipped with an automatic transmission for the convenience of repetitive transportation, loading, and unloading work. The Transmission Control Unit (TCU) is a key component in charge of the shift control function of an automatic transmission. It consists of an electric circuit with an input/output signal interface function and firmware running on a microcontroller. To develop TCU firmware, the development process of shifting algorithm design, firmware programming, verification test, and performance improvement must be repeated. A simulator is a device that simulates a mechanical system having dynamic characteristics in real time and simulates various sensor signals installed in the system. The embedded transmission simulator is a simulator that is embedded in the TCU firmware. information related to the mechanical system that is necessary for TCU normal operation. In this study, an embedded transmission simulator applied to the originally developed forklift TCU firmware was designed and used to verify various forklift shift control algorithms.