• Smart Structures and Systems
• /
• v.18 no.6
• /
• pp.1169-1188
• /
• 2016

Real-time substructuring techniques are currently an advanced experimental method for testing large size specimens in the laboratory. In dynamic substructuring, the whole tested system is split into two linked parts, the part of particular interest or nonlinearity, which is tested physically, and the remanding part which is tested numerically. To achieve near-perfect synchronization of the interface response between the physical specimen and the numerical model, a good controller is needed to compensate for transfer system dynamics, nonlinearities, uncertainties and time-varying parameters within the physical substructures. This paper presents the substructuring approach and control performance of the linear and the adaptive controllers for testing the dynamic characteristics of soil-structure-interaction system (SSI). This is difficult to emulate as an entire system in the laboratory because of the size and power supply limitations of the experimental facilities. A modified linear substructuring controller (MLSC) is proposed to replace the linear substructuring controller (LSC).The MLSC doesn't require the accurate mathematical model of the physical structure that is required by the LSC. The effects of parameter identification errors of physical structure and the shaking table on the control performance of the MLSC are analysed. An adaptive controller was designed to compensate for the errors from the simplification of the physical model in the MLSC, and from parameter identification errors. Comparative simulation and experimental tests were then performed to evaluate the performance of the MLSC and the adaptive controller.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.1
• /
• pp.36-42
• /
• 2009

We have developed software for converting the volumetric voxel data obtained from X-ray computed tomography(CT) into computer-aided design(CAD) data. The developed software can used for non-destructive testing and evaluation, reverse engineering, and rapid prototyping, etc. The main algorithms employed in the software are image reconstruction, volume rendering, segmentation, and mesh data generation. The feasibility of the developed software is demonstrated with the CT data of human maxilla and mandible bones.

• The Journal of Korean Association of Computer Education
• /
• v.4 no.2
• /
• pp.125-133
• /
• 2001

With development of computer engineering and the examination theories, new techniques to use computers in making or administrating examinations had been studied and developed. Recently, studies on web-based testing are in progress with development of Internet and information and communication technology. However, as compared with development of these technical aspects, studies on the user legibility to provide learners with comfortable environment for the evaluation have been insufficient in fact. In the web-based testing, user legibility decreases the anxiety of examinees in the examination and plays an important role in measuring their competence exactly. In this study, we tried to provide the optimum web-based evaluation interface by obtaining information through a questionnaire for primary-school students. We think that principles suggested in this study can give a great help in making the web-based evaluation screen in future. Besides, studies on more various fields including making individual questions, instructing sentences and layout of multimedia factors as well as the principles mentioned in this study should be performed.

• Archives of design research
• /
• v.20 no.2 s.70
• /
• pp.5-16
• /
• 2007

The main objective of our research is analyzing user's emotional changes while using a product, to reveal the influence of usability on human emotions. In this study we have extracted some emotional words that can come up during user interaction with a product and reveal emotional changes through three methods. Finally, we extracted 88 emotional words for measuring user's emotions expressed while using products. And we categorized the 88 words to form 6 groups by using factor analysis. The 6 categories that were extracted as a result of this study were found to be user's representative emotions expressed while using products. It is expected that emotional words and user's representative emotions extracted in this study will be used as subjective evaluation data that is required to measure user's emotional changes while using a product. Also, we proposed the effective methods for measuring user's emotion expressed while using a product in the environment which is natural and accessible for the field of design, by using the emotion mouse and the Eyegaze. An examinee performs several tasks with the emotion mouse through the mobile phone simulator on the computer monitor connected to the Eyegaze. While testing, the emotion mouse senses user's EDA and PPG and transmits the data to the computer. In addition, the Eyegaze can observe the change of pupil size. And a video camera records user's facial expression while testing. After each testing, a subjective evaluation on the emotional changes expressed by the user is performed by the user him/herself using the emotional words extracted from the above study. We aim to evaluate the satisfaction level of usability of the product and compare it with the actual experiment results. Through continuous studies based on these researches, we hope to supply a basic framework for the development of interface with consideration to the user's emotions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.825-832
• /
• 2016

This paper describes the development of a data bus analyzer for use in avionics systems integration test. The data bus analyzer is equipped with MIL-STD-1553B, CAN and Ethernet interface cards which is incorporated in a majority of the avionics systems to accommodate a variety of interfaces. It has an individual hardware for a capture engine and a analyzing engine in order to perform the collection and the analysis of the bus data at the same time efficiently. It provides a data display function of the grid, 2-dimensional and 3-dimensional form to increase the data analysis efficiency. Verification of the data bus analyzer was carried out module unit testing and inter-module integration testing on the basis of the test procedures. Verification of interlocking requirement and usefulness of developed equipment was confirmed through an integration test result performed on a system integration laboratory of aircraft which is an actual testing environment.

• Journal of Biomedical Engineering Research
• /
• v.30 no.5
• /
• pp.428-437
• /
• 2009

The Performance research about EEG-BCI algorithm in BCI-naive subjects is very important for evaluating the applicability to the public. We analyzed the result of the performance evaluation experiment about the EEG-BCI algorithm in BCI-naive subjects on three different aspects. The EEG-BCI algorithm used in this paper is composed of the common spatial pattern(CSP) and the least square linear classifier. CSP is used for obtaining the characteristic of event related desynchronization, and the least square linear classifier classifies the motor imagery EEG data of the left hand or right hand. The performance evaluation experiments about EEG-BCI algorithm is conducted for 40 men and women whose age are 23.87${\pm}$2.47. The performance evaluation about EEG-BCI algorithm in BCI-naive subjects is analyzed in terms of the accuracy, the relation between the information transfer rate and the accuracy, and the performance changes when the different types of cue were used in the training session and testing session. On the result of experiment, BCI-naive group has about 20% subjects whose accuracy exceed 0.7. And this results of the accuracy were not effected significantly by the types of cue. The Information transfer rate is in the inverse proportion to the accuracy. And the accuracy shows the severe deterioration when the motor imagery is less then 2 seconds.

• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.64-67
• /
• 2000

Reactively sputtered $Pb(Zr,Ti)O_3$(PZT) films on $IrO_2$and Ir were evaluated with particular consideration on interface properties. The $IrO_2$and Ir were previously annealed at $650^{\circ}C$ in $O_2$or $N_2$atmosphere, respectively. There was no appreciable roughening in the interface of the $PZT/IrO_2$respective to that of the PZT/Ir; the rms roughness of $IrO_2$and Ir was about 3nm and 10nm, respectively. The ferroelectric properties of the $PZT/IrO_2$were found to be better than that of the PZT/Ir; however, the leakage current of the $PZT/IrO_2$was slightly larger than that of the PZT/Ir. The $PZT/IrO_2$thin films did not exhibit any fatigue up to $10^{11}$ cycles; the $P^*\;_r-P^r$ value decreased only from 16.6 to 14$\mu$C/$\textrm{cm}^2$ until $10^{12}$ polarization reversals. On the other hand, although thin $IrO_2$layer was formed between PZT and Ir, the PZT/Ir thin films began to undergo fatigue after $10^9$ polarization reversals.

• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.433-445
• /
• 1994

Bonding of brackets is one of the essential factors for successful orthodontic treatment' so bond strength of orthodontic adhesives are very important. The purposes of this research were to compare shear bond strength of various orthodontic adhesives and to evaluate failure sites. One-hundred twenty extracted human first premolars were prepared for bonding and premolar brackets were bonded to prepared enamel surfaces with Super C Ortho, Mono-$Lok^2$, Transbond, and Super C Ortho after applying Fluorobond. After bonding of brackets, teeth specimens were divided into 3 groups. In group 1 specimens were stored at humidor $37^{\circ}C$ in 1 hour, in group 2 specimens were stored at humidor $37^{\circ}C$ in 24 hours, thermocycled 10 times and in group 3 specimens were stored at humidor $37^{\circ}C$ in 24 hours, thermocycled 1800 times. Then the universal testing machine Instron 6022, Instron Co., U.S.A. was used to test the shear bond strength of brackets to enamel. After debonding, brackets and enamel surfaces were examined under stereoscopic microscope to determine the failure sites The results were as follows : 1. Shear bond strength was significantly highest of using Super C Ortho after applying Fluorobond and Super C Ortho In group 1, was highest of using Super C Ortho in group 2, and was highest of using Mono-$Lok^2$ in group 3. 2. According to time and temperature change, in using Super C Ortho the group 2 had significantly highest strength and group 3 had lowest strength, in using Mono-$Lok^2$ the group 2 and had higher strength than group 1 and in using Super C Ortho after applying Fluorobond shear bond strength decreased constantly, 3. The failure sites were tooth-resin interface in Super C Ortho after applying Fluorobond, Mono $Lok^2$ and Transbond and were at almost same ratio bracket base-resin interface and tooth-resin interface in Super C Orth.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1
• /
• pp.56-61
• /
• 2001

This paper presents the real-time implementation of an AMR (Adaptive Multi Rate) vocoder which is included in the asynchronous International Mobile Telecommunication (IMT)-2000 mobile ASIC. The implemented AMR vocoder is a multi-rate coder with 8 modes operating at bit rates from 12.2kbps down to 4.75kbps. Not only the encoder and the decoder as basic functions of the vocoder are implemented, but VAD (Voice Activity Detection), SCR (Source Controlled Rate) operation and frame structuring blocks for the system interface are also implemented in this vocoder. The DSP for AMR vocoder implementation is a 16bit fixed-point DSP which is based on the TeakLite core and consists of memory block, serial interface block, register files for the parallel interface with CPU, and interrupt control logic. Through the implementation, we reduce the maximum operating complexity to 24MIPS by efficiently managing the memory structure. The AMR vocoder is verified throughout all the test vectors provided by 3GPP, and stable operation in the real-time testing board is also proved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.79-87
• /
• 2021

This study suggests a design process for vibrotactile interface that can apply haptic perception factors reflecting human tactile mechanisms. This process consists of 4 stages: the haptic sense requirement analysis stage, the haptic element analysis stage, the haptic perception factor analysis stage, the haptic requirement detailed design, and the prototype implementation stage. The advantage of this design process is that unnecessary tasks can be excluded in deriving and implementing user requirements, by applying haptic perception factor analysis, and the biggest feature is that research results on ergonomic mechanisms can be reflected in the haptic design, completes prototype development simultaneously while determining the haptic requirements statement by performing user evaluation, usability testing, and haptic feature optimization tasks simultaneously. This design process includes all stages from user requirements to haptic function detailed design and prototype implementation, so it is expected that general developers who lack expertise in haptic will also be able to design user-centered designs, enabling design and implementation of haptic functions at a certain level.