• Journal of Adhesion and Interface
• /
• v.7 no.3
• /
• pp.10-15
• /
• 2006

After anchoring 3-(2-aminoethylamino)propyltriethoxysilane (APTES) onto the surfaces of the channels within ordered mesoporous silica, SBA-15, we dispersed $Cu^{2+}$-perfluorophthalocyanine into the modified SBA-15 channels. From small-angle X-ray scattering (SAXS) patterns and transmission electron microscopy (TEM) images, we confirmed that both the calcined and $Cu^{2+}$-perfluorophthalocyanine-incorporated SBA-15 samples possessed ordered periodic structures and hexagonal symmetry lattices (p6mm). The value of the $d_{100}$ spacing was decreased after the incorporation of $Cu^{2+}$-perfluorophthalocyanine into the modified SBA-15 channels. We used FTIR and UV-Vis spectroscopy and thermogravimetric analysis (TGA) to characterize both the modified SBA-15 and the $Cu^{2+}$-perfluorophthalocyanine-incorporated SBA-15 samples. From scanning electron microscopy (SEM) images and $N_2$ sorption measurements, we found that the $Cu^{2+}$-perfluorophthalocyanine units were incorporated within the modified SBA-15 channels, rather than on the external surfaces of the modified SBA-15 channels.

• Korean Journal of Materials Research
• /
• v.24 no.2
• /
• pp.67-72
• /
• 2014

Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties, including high strength, high hardness, excellent ductility and toughness. In this study, nanopowders of $Al_2O_3$, MgO and $TiO_2$ were prepared as starting materials by high energy ball milling for the simultaneous synthesis and sintering of the nanostructured compound $Mg_4Al_2Ti_9O_{25}$ by high-frequency induction heating process. The highly dense nanostructured $Mg_4Al_2Ti_9O_{25}$ compound was produced within one minute by the simultaneous application of 80MPa pressure and induced current. The sintering behavior, grain size and mechanical properties of the $Mg_4Al_2Ti_9O_{25}$ compound were evaluated.

• Journal of Adhesion and Interface
• /
• v.11 no.2
• /
• pp.63-69
• /
• 2010

In this study, acryl resin PSA containing hydroxyl group based on 2-EHA (2-ethyl hexyl acrylate), 2-EHMA (2-ethyl hexyl methacrylate), 2-HEA (2-Hydroxy ethyl acrylate), acrylic acid was synthesized and then, isocyanate modified acryl resin PSA prepared with adduct reaction according to the amount of MOI (Methacryloyloxyethyl isocyanate) or 2-isocyanatoethyl methacrylate that can improve the curing property. This research shows that the initial PSA and peel adhesion are decreased according to the increase of the amount of the MOI and isocyanate curing agent. After UV irradiating, the peel adhesion is decreased with increasing the amount of the MOI (Methacryloyloxyethyl isocyanate) and isocyanate curing agent, because of the high curing property.

• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.371-378
• /
• 1997

The study for direct synthesis of TaC carbide which was a reaction product of tantalum and carbon in the cast iron was performed. Cast iron which has hypo-eutectic composition was cast bonded in the metal mold with tantalum thin sheet of thickness of $100{\mu}m$. The contents of carbon and silicon of cast iron matrix was controlled to have constant carbon equivalent of 3.6. The chracteristics of microstructure and the formation mechanism of TaC carbide in the interfacial reaction layer in the cast iron/tantalum thin sheet heat treated isothermally at $950^{\circ}C$ for various time were examined. TaC carbide reaction layer was grown to the dendritic morphology in the cast iron/tantalum thin sheet interface by the isothermal heat treatment. The composition of TaC carbide was 48.5 at.% $Ti{\sim}48.6$ at.% C-2.8 at.% Fe. The hardness of reaction layer was MHV $1100{\sim}1200$. The thickness of reaction layer linearly increased with increasing the total content of carbon in the cast iron matrix and isothermal heat treating time. The growth constant for TaC reaction layer was proportional to the log[C] of the matrix. The formation mechanism of TaC reaction layer at the interface of cast iron/tantalum thin sheet was proved to be the interfacial reaction.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.98-102
• /
• 2021

GaOOH is obtained via hydrothermal synthesis procedure. The formed GaOOH is turned into α-Ga₂O₃ at 500℃ annealing. As the annealing temperatures increase the α-Ga₂O₃ is in part turned into β-Ga₂O₃ and fully turned into β-Ga₂O₃ after 1100℃. XPS and PL results reveal that heterojunction interface between α-Ga₂O₃ and β-Ga₂O₃ become maxim at 500℃ annealing condition, which result in the highest photocatalytic activity. The presence of heterojunction interface slows down the recombination process by separating photogenerated electron-hole pairs and thereby enhance the overall photocatalytic activity.

• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.33-38
• /
• 2022

In this study, we report on the synthesis and properties of eco-friendly waterborne polyurethane (WPU) according to bio-polyol contents. It was successfully synthesized by the different polyester polyol (DT-1040) and castor oil based polyol (COP) ratios. The glass transition temperature (Tg) of the synthesized bio polyol based waterborne polyurethane was around -70 ℃ and -30 ℃, and it was confirmed that the Tg range was widened as the COP content increased. In addition, as the COP content increased, the tensile strength decreased, and optimum adhesive strength showed when DT-1040:COP ratio was 7:3.

• Journal of Adhesion and Interface
• /
• v.25 no.1
• /
• pp.143-151
• /
• 2024

Organic photovoltaics (OPVs) have shown great potential as a new generation of energy harvesters because they possess many unique properties, including mechanical flexibility, lightweight, semi-transparency, and low-fabrication costs. Recent advancements in molecular structure and device engineering have led to achieving power conversion efficiency (PCE) exceeding 19%. However, these highly efficient active layer materials have been hampered in their commercialization by complex synthesis steps that result in high manufacturing costs. To address this issue, research is actively underway on low-cost active layer materials with simple structures. This paper introduces such cost-effective active layer materials and strategies for their synthesis.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.2 no.2
• /
• pp.103-107
• /
• 2016

Solid phase extraction (SPE) purification method is the efficient and well-known tool for automated [$^{11}C$]acetate synthesis. A fully automated homemade module adopting the SPE method and 'pinch' valves was developed very economically with a universal interface board, a relay card and an open source programmable logic controller. The radiochemical yield of the optimized [$^{11}C$]acetate synthesis by this system was $58.8{\pm}2.1%$ (n=10, decay-corrected) from $15.5{\pm}0.19GBq$ of $[^{11}C]CO_2$ as starting activity, and total synthetic time was 15 minutes. HPLC analysis showed its high radiochemical purity as $97.4{\pm}1.1%$ without possible by-products.

• Korean Journal of Materials Research
• /
• v.33 no.5
• /
• pp.222-228
• /
• 2023

Transition metal oxides formed by a single or heterogeneous combination of transition metal ions and oxygen ions have various types of crystal structures, which can be classified as layered structures and non-layered structures. With non-layered structures, it is difficult to realize a two-dimensional structure using conventional synthesis methods. In this study, we report the synthesis of cobalt oxide into wafer-scale nanosheets using a surfactant-assisted method. A monolayer of ionized surfactant at the water-air interface acts as a flexible template for direct cobalt oxide crystallization below. The nanosheets synthesized on the water surface can be easily transferred to an arbitrary substrate. In addition, the synthesizing morphological and crystal structures of the nanosheets were analyzed according to the reaction temperatures. The electrochemical properties of the synthesized nanosheets were also measured at each temperature. The nanosheets synthesized at 70 ℃ exhibited higher catalytic properties for the oxygen evolution reaction than those synthesized at other temperatures. This work suggests the possibility of changing material performance by adjusting synthesis temperature when synthesizing 2D nanomaterials using a wide range of functional oxides, resulting in improved physical properties.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1020-1026
• /
• 2005

In the era of ubiquitous computing, human-friendly man-machine interface is getting more attention due to its possibility to offer convenient services. For this, in this paper, we introduce a 'Half-Mirror Interface System (HMIS)' as a novel type of human-friendly man-machine interfaces. Basically, HMIS consists of half-mirror, USB-Webcam, microphone, 2ch-speaker, and high-speed processing unit. In our HMIS, two principal operation modes are selected by the existence of the user in front of it. The first one, 'mirror-mode', is activated when the user's face is detected via USB-Webcam. In this mode, HMIS provides three basic functions such as 1) make-up assistance by magnifying an interested facial component and TTS (Text-To-Speech) guide for appropriate make-up, 2) Daily weather information provider via WWW service, 3) Health monitoring/diagnosis service using Chinese medicine knowledge. The second one, 'display-mode' is designed to show decorative pictures, family photos, art paintings and so on. This mode is activated when the user's face is not detected for a time being. In display-mode, we also added a 'healing-window' function and 'healing-music player' function for user's psychological comfort and/or relaxation. All these functions are accessible by commercially available voice synthesis/recognition package.