• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.516-521
• /
• 2002

According as railway signalling equipments are computerized recently, necessity of communication protocol for interface between these equipments is increasing, Therefore the research about communication protocol structure that is need according to computerization trend of these signalling goes, especially communication protocol structure for interface between LDTS(Local Data Transmission System) and EIS(Electronic Interlocking System). Analyzed existent protocols that is applied currently for interfaces between above two signalling for this research and also technology analysis of internal/external similar protocols and operator and maker's requirement. With these study finding plain in this paper, explained summary of communication protocol structure for interface between LDTS and EIS.

• Journal of Biosystems Engineering
• /
• v.36 no.2
• /
• pp.79-88
• /
• 2011

The purpose of this study was to analyze power requirement of an agricultural tractor by major field operations. First a survey was conducted to obtain annual usage ratio of agricultural tractor by field operation. Plowing, rotary tillage, and loader operations were selected as major field operations of agricultural tractor. Second, a power measurement system was constructed with strain-gauge sensors to measure torque of four driving axles and a PTO axle, speed sensors to measure rotational speed of the driving axles and an engine shaft, pressure sensors to measure pressure of hydraulic pumps, an I/O interface to acquire the sensor signals, and an embedded system to calculate power requirement. Third, the major field operations were experimented under fields with different soil conditions following planned operation paths. Power requirement was analyzed during the total operation period consisted of actual operation period (plowing, rotary tillage, and loader operations) and period before and after the actual operation (3-point hitch operating, forward and reverse driving, braking, and steering). Power requirement of tractor major components such as driving axle part, PTO part, main hydraulic part, and auxiliary hydraulic part were measured and calculated to determine usage ratio of agricultural tractor power. Results of averaged power requirement for actual field operation and total operation were 23.1 and 17.5 kW, 24.6 and 19.1 kW, and 14.9 and 8.9 kW, respectively, for plowing, rotary tillage, and loader operations. The results showed that rotary tillage required the greatest power among the operations. Averaged power requirement of driving axles, PTO axle, main hydraulic part, and auxiliary part during the actual field operation were 8.1, 7.8, 3.4, and 1.5 kW, respectively, and the total requirement power was about 70 % (20.8 kW) of the rated power. Averaged power requirement of driving axles, PTO axle, main hydraulic, and auxiliary hydraulic for the total operation period were 6.5, 6.0, 2.1, 0.9 kW, respectively, and total requirement power was about 52 % (15.5 kW) of the rated power. Driving axles required the greatest amount of power among the components.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1860-1868
• /
• 2009

As general use of Mobile devices, the integration operations between the Home network is active. For popularization of Home network interface of normalizing in user's use convenience offer must, and developer must be able to cope sensitively in change development and requirement, hereafter such as maintenance with normalized interface environment. In the case of Home network, because several terminal information devices have to be used to a Home server, user establishment and exclusion should be easy and should adapt fast in requirement alteration and maintenance. In this paper, we designed and implemented mobile home network components with applied efficient information transmission interface that can be applied to the various application of OSGi platform. These components can respond quickly of user requirements and maintenance and that can be reuse and evolved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.79-87
• /
• 2021

This study suggests a design process for vibrotactile interface that can apply haptic perception factors reflecting human tactile mechanisms. This process consists of 4 stages: the haptic sense requirement analysis stage, the haptic element analysis stage, the haptic perception factor analysis stage, the haptic requirement detailed design, and the prototype implementation stage. The advantage of this design process is that unnecessary tasks can be excluded in deriving and implementing user requirements, by applying haptic perception factor analysis, and the biggest feature is that research results on ergonomic mechanisms can be reflected in the haptic design, completes prototype development simultaneously while determining the haptic requirements statement by performing user evaluation, usability testing, and haptic feature optimization tasks simultaneously. This design process includes all stages from user requirements to haptic function detailed design and prototype implementation, so it is expected that general developers who lack expertise in haptic will also be able to design user-centered designs, enabling design and implementation of haptic functions at a certain level.

• Archives of design research
• /
• v.13 no.3
• /
• pp.49-58
• /
• 2000

We commonly use the computer interface a generalized form. However, the requirement of the user various and some users cannot apply the general circumstance. For these requirements, this research suggests the non-verbal communication. The suggestion is that Mewing with the mouth in human behavior applies to the interaction of the computer This was offered in three forms. First, drawing application: second, the arcade game: third, the interactive book. in condusion, we confirmed that the suggestion of this research could be effectively used for the development of the human computer interface.

• The KIPS Transactions:PartA
• /
• v.11A no.7 s.91
• /
• pp.475-482
• /
• 2004

We live in the flood of information due to advancement of information communication and increase of E-mail. Managing users huge in-formation systematically and speedy searching are needed in these social advancement. In this thesis, in order to satisfy these requirement, We suggested Real-time LDAP Interface using Main Memory Resident Database Management System which can manage a lot of information fast systematically. It is expected that system can provide advantage of performance improvement through replacing Main Memory Resident Database Management System without change of application which is required high speed process.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.61-69
• /
• 2004

The user interface design needs to support the complex interactions between human and computers. It also requires comprehensive knowledges many areas to collect customer's requirements and negotiate with them. The user interface designer needs to be a graphic expert, requirement analyst, system designer, programmer, technical expert, social activity scientist, and so on. Therefore, it is necessary to research on an designing methodology of user interface for satisfying various expertise areas. In the paper, We propose the 4 business event's abstract object visualizing phases such as fold abstract object modeling, task abstract object modeling, transaction abstract object modeling, and form abstract object modeling. As a result, this modeling method allows us to enhance visual cohesion of UI, and help unskilled designer to can develope the higy-qualified user interface.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.479-489
• /
• 2011

The bidirectional dc-dc converter, being the interface between Energy Storage Element (ESE) and DC bus, is an essential component of the power management system for vehicle applications including electric vehicle (EV), hybrid electric vehicle (HEV), and fuel cell vehicle (FCV). In this paper, a novel multiphase bidirectional dc-dc converter interfacing with battery to supply and absorb the electric energy in the FCV system was studied with the help of real time digital simulator (RTDS). The mathematical models of fuel cell, battery and dc-dc converter were derived. A power management strategy was developed and first simulated in RTDS. A Power Hardware-In-the-Loop (PHIL) simulation using RTDS is then presented. The main challenge of this PHIL is the requirement for a highly dynamic bidirectional Simulation-Stimulation (Sim-Stim) interface. This paper describes three different interface algorithms. The closed-loop stability of the resulting PHIL system is analyzed in terms of time delay and sampling rate. A prototype bidirectional Sim-Stim interface is designed to implement the PHIL simulation.

• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.48-55
• /
• 2007

The system requirement definition, system configuration, major parameters for GNSS ground station development are presented in this paper. GNSS ground station system consists of the GNSS sensor station, up link station and monitoring & control system. The GNSS sensor station consists of navigation receiver subsystem which process the GPS and Galileo navigation signal, automic clock subsystem, meteorological data receiving subsystem and navigation data processing subsystem. To communicate the error correction of navigation fate, GNSS sensor station interface with GNSS Control Center.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.863-869
• /
• 2006

The existing Europe Standard, EN 50159 with respect of safety of railway signalling communication protocol has been changed into International Standard, IEC 62280. This Standard presents the requirement for safe communication between safety-related devices which connects with transmission system, there are both closed and open transmission system. Regardless of this international Standards, the communication protocol for interface between CTC communication server and external facilities has been standardized several years ago in our country, so this is applied to integrated CTC system in KORAIL. Two Standards are currently standardized as a protocol between CTC and external facilities, these standard protocols are also required high level safety as a communication link which is transmitted vital control information in common with the train control system. For that reason, we have made analysis of requirement for the safe transmission required by international standard. Under this analysis, we have studied safety features of communication protocol applying to our standard. In other words, we have researched that how many the requirement from international standard for safe transmission is reflected in domestic standard protocol, and also whether our standard makes sure of safety enough or not.