• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.06a
• /
• pp.67-70
• /
• 1997

This Paper describes the system configuration and implementation method of an IMPRES (Interactive Multimedia exPRESS) terminal. The terminal is developed in the form of a PC add-on board that is called MINIBA (Media and Network Interface Board Assembly). IMPRESS is a communication service platform that support various interactive multimedia services. The main objectives of developing IMPRESS are to implement DAVIC compliant services platform to verify DAVIC specification and to support testing environment. Currently IMPRESS terminal provides MPEG-2 quality movies on demand, switched video broadcasting, and home-shopping service to the service user, based on the ATM network.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.4
• /
• pp.381-389
• /
• 2010

Modern military equipments are often required to be mounted on a truck for their survivability and operation performance. Special units installed on the truck at times experience serious shock vibration caused by obstacles of road and/or uncommon road shape. It is then essential to analyze the travel performance of truck-mounted special units for their survivability and performance. In this paper, shock responses of the equipments subjected to bump passing and wash board road are experimentally obtained and also analyzed via FEM. Modified bump configuration and road profile considering the interface with tire are suggested. Analytical results considering this modification show good agreement with test results.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.106-111
• /
• 2020

In this paper, we propose the non-contact gesture recognition system and algorithm using proximity-based sensors. The system uses four IR receiving photodiode embedded on a single chip and an IR LED for small area. The goal of this paper is to use the proposed algorithm to solve the problem associated with bringing the four IR receivers close to each other and to implement a gesture sensor capable of recognizing eight directional gestures from a distance of 10cm and above. The proposed system was implemented on a FPGA board using Verilog HDL with Android host board. As a result of the implementation, a 2-D swipe gesture of fingers and palms of 3cm and 15cm width was recognized, and a recognition rate of more than 97% was achieved under various conditions. The proposed system is a low-power and non-contact HMI system that recognizes a simple but accurate motion. It can be used as an auxiliary interface to use simple functions such as calls, music, and games for portable devices using batteries.

• Information and Communications Magazine
• /
• v.10 no.10
• /
• pp.22-29
• /
• 1993

This paper describes development of a real-time voice recognition dialing system which can recognize around one hundred word vocabularies in speaker independent mode. The voice recognition algorithm is implemented on a DSP board with a telephone interface plugged in an IBM PC AT/486. In the DSP board, procedures for feature extraction, vector quantization(VQ), and end-point detection are performed simultaneously in every 10msec frame interval to satisfy real-time constraints after the word starting point detection. In addition, we optimize the VQ codebook size and the end-point detection procedure to reduce recognition time and memory requirement. The demonstration system is being displayed in MOBILAB of Korea Mobile Telecom at the Taejon EXPO '93.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.2
• /
• pp.51-57
• /
• 2006

This study is concerned with image information management system for small scale hospital. We intended to developing image management system which is used of the existing analog devices such as medical camera, supersonic analyser, endoscope etc. We developed a video in interface board based USB 2.0 for handling image in real time. It is capable of transmitting image input signal like as NTSC, PAL to personal computer through USB 2.0. The developed the board of 40 speeds compared with the exiting system based USB 1.0. Especially the developed system is very helpful for small hospital like as dental clinic, because it is easy and convenient to manage image information without expert. So it will provide reduction of time and cost for handling image information(collecting, saving, retrieval, transmitting image).

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.2
• /
• pp.207-216
• /
• 1991

In the case that the robot manipulator should respond to the variance and uncertainty of the environment in performing preforming precision tasks, it is indispensable that the robot utilizes the various sensors for intrlligence. In this paper, the robot force control method is implemented with a force/torque sensor, two personal computers, and a PUMA 560 manipulator for performing the various application tadks. The hybrid position/force control method is used to control the force and position axis separately. An interface board is designed to read the force/torque sensor output into the computer. Since the two computers should exchange the information quickly, a common memory board is designed. Before the algorithms of application tasks are developed, the basic force commands must be supplied. Thus, the MOVE-UNTIL command is used at the discrete time instant and, the MOVE-COMPLY is used at the continuous time instant for receiving the force feedback information. Using the two basic force commands, three application algorithms are developed and implemented for edge-following, insertion, and grinding tasks.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.229-231
• /
• 2007

본 연구에서는 연료전지나 배터리 및 슈퍼커패시터 등의 전기화학적 전력기기의 임피던스 모델링이 가능한 저가의 임피던스 분광시스템의 개발에 관해 제안한다. 제안된 시스템은 상용 DAQ Board (Data Acquisition Board)와 강력한 HMI(Human-Machine Interface)를 지원하는 Labview 소프트웨어를 이용하여 구성되었고 고가의 EIS (Electrochemical Impedance Spectroscopy) 장비를 대체하여 널리 사용될 수 있을 것으로 기대된다. 또한, 시스템의 응답을 Lock-in Amplifier를 이용하여 측정함으로써 노이즈가 많은 환경에서도 정확한 측정이 가능하게 하였다. 제안된 시스템을 이용하여 Ballard Nexa 1.2kW PEM 연료전지 스택의 임피던스를 측정하였고, 이를 바탕으로 한 등가 임피던스 모델도 제안된다.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1219-1221
• /
• 1996

In this paper, we develop a control system of an Educational Robot and implement a fuzzy algorithm for the position control. The MA2000 robot manufactured by TecQuipment Co. is the controlled system and 3 axes(waist, shoulder, elbow) of total 6 axes are controlled by the fuzzy logic-based algorithm. The control system consists of an IBM PC, an interface board capable of A/D conversion and PWM generation, and a drive board for dc motors in joints of the robot. The experiments show that the modified fuzzy algorithm yields a better performance in steady-stale than that of the conventional fuzzy algorithm.

• KIISE Transactions on Computing Practices
• /
• v.23 no.2
• /
• pp.97-103
• /
• 2017

Many hardware-based regular expression matching architectures have been proposed for high-performance matching. In particular, regular expression processors, which perform pattern matching by treating the regular expressions as the instruction sequence like general purpose processors, have been proposed. After instruction sequence and data are provided in the instruction memory and data memory, respectively, a regular expression processor can perform pattern matching. To use a regular expression processor as a coprocessor, we need the host interface to transfer the instruction and data into the memory of a regular expression processor. In this paper, we design and implement the host interface between a host and a regular expression processor in the DE1-SoC board and the application program interface. We verify the operations of the host interface and a regular expression processor by executing the application programs which perform pattern matching using the application program interface.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.298-306
• /
• 2014

The railway signalling system for safe train operation regulates the train speed to ensure the safety distance between consecutive trains by using wayside facilities such as track circuits and interlocking systems. In addition, this signalling system controls the trackside equipment such as a railway point along the train line. This ground-equipment-based train control systems require high CAPEX and OPEX. To deal with these problems, the train control system using the on-board controller has been recently proposed and its related technologies have been widely studied. The on-board-controller-based train control system is that the on-board controller can directly control the trackside equipment on the train line. In addition, if this system is used, the wayside facilities can be simplified, and as a result, the efficient and cost-effective train control system can be realized. To this end, we have developed the prototypes of the on-board controller and wayside object control units which control the point and crossing gate and performed the integrated operation simulation in a testbed. In this paper, before the field test of the on-board-controller-based train control system, we perform the preliminary field trial including the installation test, wireless access test, interface test with other on-board devices, and normal operation test.