• Computers and Concrete
• /
• 제12권5호
• /
• pp.651-668
• /
• 2013

Concrete structures need repairing due to various reasons such as deteriorative effects, overloading, poor quality of workmanship and design failures. Cement based repair mortars are the most widely used solutions for concrete repair applications. Various factors may affect the bond strength between concrete substrate and repair mortars. In this paper, the effects of polymer additives, strength of the concrete substrate, surface roughness, surface wetness and aging on the bond between concrete substrate and repair mortar has been investigated. Full factorial experimental design is employed to investigate the main and interaction effects of these factors on the bond strength. Analysis of variance (ANOVA) under design of experiments (DOE) in Minitab 14 Statistical Software is used for the analysis. Results showed that the interaction bond strength is higher when the application surface is wet and strength of the concrete substrate is comparatively high. According to the results obtained from the analysis, the most effective repair mortar additive in terms of bonding efficiency was styrene butadiene rubber (SBR) within the investigated polymers and test conditions. This bonding ability improvement can be attributed to the self-flowing ability, high flexural strength and comparatively low air content of SBR modified repair mortars. On the other hand, styrene acrylate rubber (SAR) modified mortars was found incompatible with the concrete substrate.

• 대한조선학회논문집
• /
• 제55권4호
• /
• pp.341-349
• /
• 2018

Recently, it has been reported that the whipping response, which is the elastic phenomenon of the ship, may be one of the causes of the ship accident. Unfortunately, the commonly used methodology for evaluating the whipping effect effectively has not been developed yet. In this study, we developed a procedure to estimate the whipping effect of hull in actual design stage. Fluid-structure interaction analysis was performed for a dominant short term sea state to obtain the time series data of vertical wave bending moment including the whipping response by slamming. In order to estimate the whipping effect by using the time series, some signal processing and statistical techniques such as low pass filtering, Weibull fitting and so on, were applied. the hydro-elasticity analysis was performed on container ships of various sizes to evaluate the whipping effect. The parameters that can affect the response of the hull vibration was selected and the effect of these parameters on whipping was analyzed.

• BMB Reports
• /
• 제39권3호
• /
• pp.319-328
• /
• 2006

SecA protein, a cytoplasmic ATPase, plays a central role in the secretion of signal peptide-containing proteins. Here, we examined effects of signal peptide and ATP on the oligomerization, conformational change, and membrane binding of SecA. The wild-type (WT) signal peptide from the ribose-binding protein inhibited ATP binding to soluble SecA and stimulated release of ATP already bound to the protein. The signal peptide enhanced the oligomerization of soluble SecA, while ATP induced dissociation of SecA oligomer. Analysis of SecA unfolding with urea or heat revealed that the WT signal peptide induces an open conformation of soluble SecA, while ATP increased the compactness of SecA. We further obtained evidences that the signal peptide-induced oligomerization and the formation of open structure enhance the membrane binding of SecA, whereas ATP inhibits the interaction of soluble SecA with membranes. On the other hand, the complex of membrane-bound SecA and signal peptide was shown to resume nucleotide-binding activity. From these results, we propose that the translocation components affect the degree of oligomerization of soluble SecA, thereby modulating the membrane binding of SecA in early translocation pathway. A possible sequential interaction of SecA with signal peptide, ATP, and cytoplasmic membrane is discussed.

• 자원리싸이클링
• /
• 제10권1호
• /
• pp.49-55
• /
• 2001

The strategy of recovering metals from scrap is in general much different from primary sources. One of the main differences between the treatment of scrap and that of primary sources lies with the fact that metals are frequently associated with other met-als to form alloys in scrap, while metals occur in primary sources as oxides or sulfides. In this paper, factors affecting the dis-solution behavior of metals from various alloy systems have been reviewed and discussed. Specific examples have been drawn from Au/Ag, Au/cu and Ag/cu systems. Results of the dissolution behavior of various metals from these alloys have been reviewed and compared to the dissolution behavior of single metal systems in various lixiviants such as acids, cyanide and ammonia. It has been observed that the presence of other metals in alloys would significantly affect the dissolution rate of the metal in question. The leaching behavior of metals from homogeneous alloys relies on the chemical interaction between atoms in the lattice of the alloys, while that from heterogeneous alloys is affected by galvanic interaction established in the solution The manner in which the dissolution of a certain metal is influenced by surrounding metals has been discussed in terms of pas-sive and noble nature of the metal in relation to the neighboring metals. The role of the standard electrochemical Potential of these metals on the selective dissolution for a given lixiviant has also been discussed.

• 한국콘텐츠학회논문지
• /
• 제10권8호
• /
• pp.209-216
• /
• 2010

본 논문의 목적은 디지털 콘텐츠에 대한 사용자의 몰입경험(flow experience)을 탐색하는 것이다. 구체적으로, 본 논문은 디지털 콘텐츠에 대한 몰입경험을 온라인게임 사례(case)에 적용하여 도전감과 숙련도가 사용자의 몰입경험에 어떠한 영향을 주는가를 실증적으로 분석하였다. 연구결과 도전감과 숙련도의 수준(낮음, 보통, 높음)에 따라 디지털 콘텐츠(온라인게임) 사용자의 몰입경험은 유의한 차이를 보였다. 또한, 몰입경험에 대한 도전감과 숙련도 사이의 상호작용(interaction effect)은 존재하지 않는 것으로 나타났다. 본 논문의 결과는 향후 디지털 콘텐츠를 개발하고 디자인하는 IT기업에게 유용한 시사점을 제공하리라 본다.

• Earthquakes and Structures
• /
• 제2권3호
• /
• pp.257-277
• /
• 2011

An evaluation is presented of the response of a 3-storey R/C structure during the destructive Lefkada earthquake of 14/08/2003. Key aspects of the event include: (1) the unusually strong levels of ground motion (PGA = 0.48 g, $SA_{max}$ = 2.2 g) recorded approximately 10 km from fault, in downtown Lefkada; (2) the surprisingly low structural damage in the area; (3) the very soft soil conditions ($V_{s,max}$ = 150 m/s). Structural, geotechnical and seismological aspects of the earthquake are discussed. The study focuses on a 3-storey building, an elongated structure of rectangular plan supported on strip footings, that suffered severe column damage in the longitudinal direction, yet minor damage in the transverse one. Detailed spectral and time-history analyses highlight the interplay of soil, foundation and superstructure in modifying seismic demand in the two orthogonal directions of the building. It is shown that soil-structure interaction may affect inelastic seismic response and alter the dynamic behavior even for relatively flexible systems such as the structure at hand.

• Structural Engineering and Mechanics
• /
• 제23권3호
• /
• pp.279-292
• /
• 2006

Natural hazards, including the wind hazard and others, threaten the integrity of the modern society. A transportation system usually consists of roadways, bridges and related vehicles. Harsh environmental conditions, caused by such as wind, exist in the real world frequently and affect the dynamic performance of the transportation system through their interactions. Long-span bridges are usually the backbones of transportation lines. In windy conditions, the information about the dynamic performance of bridges and vehicles considering full interactions of environmental factors is very essential for people to assess the overall operational conditions and safety risks of the transportation lines. Most of existent approaches target specifically at several isolated tasks considering partial interaction effects. In order to improve the understanding of these related-in-nature problems integrally as well as the consistency of different approaches, a unified approach to integrally predict the dynamic performance of long-span bridges and vehicles under wind is introduced. Such an approach can be used as a general platform to predict the dynamic responses of vehicles and bridges under various situations through adopting both commercial and in-house software. Dynamic interaction effects can be fully considered automatically for each situation. An example of a prototype bridge in US is given for the purpose of demonstration.

• 유통과학연구
• /
• 제18권6호
• /
• pp.5-14
• /
• 2020

Purpose: This study was based on curation commerce that has been rapidly developing. It looked into the effect of curation commerce's quality of service factors (information quality, information interest quality, interaction quality, and personalization quality) on satisfaction and the mediating effect of consumer empathy and shopping value between service qualities and consumers' satisfaction with curation commerce. Research design, data, and methodology: The survey was conducted on 273 consumers who used Chinese curation commerce services. The research data was analyzed using the Smart PLS 3.0 program. The empirical analysis was conducted with reliability and validity analyses of the questionnaire and hypothesis test. Results: As a result, only the quality of information had a direct impact on satisfaction. The remaining service quaility factors (information interest quality, interaction quality, and personalization quality) were found to affect satisfaction through utilitarian value or consumer empathy. Conclusions: This study is meaningful in that it selected the service quality factors experienced by consumers about curation commerce services in line with the bright market prospects of curation services. In addition, the significance of this study was to reveal the psychological mechanism of the process in which the quality of service reaches consumer satisfaction.

• Journal of Nutrition and Health
• /
• 제30권6호
• /
• pp.605-613
• /
• 1997

This study was to investigate interaction between dietary protein and Ca levels in Ca metabolism and renal function in osteporosis rats. Five week-old female rats were fed a low Ca diet for 4 weeks after ovariectomy operation to establish rat models of osteoporosis. The ovariectomized osteoporosis rats were divided into six groups and were fed experimental diets which contained two levels of protein, normal (20%) and high(40%) , and three levels of Ca, low (0.06%), normal (0.47%) and high(0.94%) for 4 weeks , respectively. The ovaricetmized rat model of osteoporosis showed a remarkable decrease in serum Ca concentration, fresh weight and breaking force of femur, Ca and P contents of femur, and apparent absorption and retention of Ca. The supplementations of Ca and P contents of femur, and apparent absorption and retention of Ca. The supplementations of Ca at the dietary levels of normal and high levels significantly enhanced Ca bioavailability shown in the above experimental rat models of osteoporosis, regardless of dietary protein levels ; whereas the rats which were fed the low Ca diet demonstrated rather a decrease in its bioavailability. Irrespectively of the dietary Ca levels, the rats which were fed high protein diet exhibited an increase in kidney weight, urinary Ca, volume and hydroxyproline, and glomerular filtration ratio(GFR). The results show that dietary protein and calcium levels affect the renal function and Ca metabolism independently, while the interaction between protein and calcium have not been shown.

• 전자공학회논문지A
• /
• 제30A권10호
• /
• pp.59-66
• /
• 1993

PZT thin film deposited by rf magnetron sputtering was annealed by rapid thermal process(RTP) in PbO ambient to prevent vaporing of Pb and interface reactions. Si and TiN/Ti/Si substrates were prepared to survey application of TiN/Ti layer which can prevent interface interaction with Si and crack of PZT thin films. As temperature increased. PZT thin films surface on Si substrate appeared more severe cracks which should affect electrical properties deadly. TiN/Ti(40-150${\mu}{\Omega}{\cdot}cm$) layer applied for buffer layer suppressed interface interaction and film cracking. The measured leakage current(LC) and breakdown voltage(BV) of PZT thin film on TiN/Ti/Si substrate annealed at 650$^{\circ}$C for 15 sec (thickness of 2500$\AA$) were 38 nA/cm2 and 3.5 MV/cm and dielectric constant was 310 at 1 MHz, and remanent polarization (Pr) and coercive field (Ec) were 6.4${\mu}C/cm^{2}$ and 0.2MV/cm at 60 Hz, respectively.