• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.818-823
• /
• 2016

Millimeter wave (mm-wave) communication systems provide high data rates owing to the large bandwidths available at mm-wave frequencies. Recently, analogue and digital combined beamforming, namely "hybrid beamforming" has drawn attentions owing to its ability to realize the required link margins in mm-wave systems. Taking into account the radio frequency (RF) hardware limitations, such as the analogue phase shifter gain constraint and the low resolution of the phase controller, we introduce an uplink hybrid beamforming system that includes discrete Fourier transform (DFT) based "fixed" analogue beamforming. We adopt a zero-forcing (ZF) multiple-input multiple-output (MIMO) equalizer to eliminate the uplink inter-user interferences. Moreover, to improve the sum-rate performances, we propose a transmit beam selection algorithm which makes the uplink effective channels, i.e., the beamformed channels, become near orthogonal. The effectiveness of the proposed beam selection algorithm was verified through numerical simulations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.247-257
• /
• 2020

Livestock epidemics, such as foot and mouth disease, are causing enormous economic losses due to their strong infectious power. Early detection of infectious diseases in livestock is very important, but it is difficult to diagnose early in individual farms, and there are frequent cases of transmission through inter-farm movement such as veterinarians and feeding vehicles. In this study, we studied the technology that enables rapid diagnosis without veterinarian farm visits and prevents further spread by automatically monitoring the body temperature of livestock using ubiquitous-based information and communication technology in the early stage of onset and sending it in real time. We have presented a technique for systematically managing livestock epidemics at the farm level, regional level, and national level by using the community mapping technique by using the remote medical treatment system linked to the automatically collected information. In this process, community mapping items for each step and stakeholders were derived for crowd sourcing based spatial information technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.528-535
• /
• 2012

This paper proposes silence drop first(SDF) active buffer management algorithm to increase the voice capacity when silence suppression is used. This algorithm finds and drops silence packet rather than voice packet in the queue for resolving buffer overflow of queue. Simulations with voice codec of G.729A and G.711 are performed. By using proposed SDF algorithm, the voice capacity is increased by 84.21% with G.729A and 38.46% with G.711. Further more, SDF algorithm reduces the required link capacity and loosens the silence packet inter-arrival time limit to provide target voice quality compared with that of conventional algorithms.

• The KIPS Transactions:PartB
• /
• v.12B no.2 s.98
• /
• pp.137-142
• /
• 2005

Since wireless communication cost is relatively expensive, the mobile games using cellular phones or PDAs are mostly played after being downloaded unlike more updated types of phone-to-phone or online games. In particular, the upbringing games, in which garners foster virtual companion animals or vegetables as their avata, have been spotlighted. It is essential to supply variety of items for upbringing avatas. However, due to diverse tastes for avatas and limited storage of mobile terminals, game manias must download their desired items from homepages. In addition, game developers must inform users through SMS messages whenever a new item is created. To do so, they must link WEB server and WAP server to Call Back URL or ARS. This paper proposed a linkage method suitable for JAVA-based mobile phone operating system. The proposed method will consequently increase life cycle of a game and reinforce profitability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.41-49
• /
• 2015

The common way to obtain a stereoscopic image of a subject at a distance is to place two cameras on the parallel axis rather than crossing axis. To find the IAD and maximum focal length, left and right images are obtained by varying the IAD of cameras and the focal length of the camera lens and the depth budget for the obtained images is analyzed through post production. Then, the database for IAD and focal length of the camera lens with the depth range that does not cause visual fatigue and visual discomfort are developed. These data are used to design fuzzy control and deduce the IAD and focal length of the camera lens to shoot a subject at a distance, and the function of the fuzzy control is confirmed through the actual shooting within the range of deduced IAD and focal length of the camera lens.

• Journal of Internet of Things and Convergence
• /
• v.6 no.4
• /
• pp.81-87
• /
• 2020

This paper creates a standard node for acquiring sensor data from various industrial sensors (IoT/non-IoT) for the establishment of Smart Factory Digital Twin, and provides inter-compatible data by linking zones by group/process to secure data stability and to ensure the digital twin (Digital Twin) of Smart Factory. The process of the Zone Master platform contains interface specifications to define sensor objects and how sensor interactions between independent systems are performed and carries out individual policies for unique data exchange rules. The interface for execution control of the Zone Master Platform processor provides system management, declaration management for public-subscribe, object management for registering and communicating status information of sensor objects, ownership management for property ownership sharing, time management for data synchronization, and data distribution management for Route information on data exchange.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1525-1530
• /
• 2022

BGP(Border Gateway Protocol) is a routing protocol that is actively used in inter-AS routing on the Internet. However, BGP routing protocol is vulnerable to BGP hijacking attacks that hijack the network by impersonating normal BGP sessions. BGP Hijacking attacks can lead to causing intercept IP traffic or interference with the normal service operation. Recently, BGP hijacking attacks, which have often occurred overseas, have also occurred in Korea. It means threatening the security of the Internet. In this paper, we analyze the overall process of attack through representative attack cases and virtual scenarios of BGP hijacking and based on the results of analyzing the application status of security technology to prevent BGP hijacking attacks by Korea and global major ISPs. It covers the technical proposal of ISPs and autonomous system operators should take to defend against BGP hijacking attacks.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2004

The INS(Inertial Navigation System) provides high rate position, velocity and attitude data with good short-term stability while the GPS(Global Position System) provides position and velocity data with long-term stability. By integrating the INS with GPS, a navigation system can be achieved to Provide highly accurate navigation Performance. For the best performance, time synchronization of GPS and INS data is very important in GPS/INS integrated system But, it is impossible to synchronize them exactly due to the communication and computation time-delay. In this paper, to reduce the error caused by the measurement time-delay in GPS/INS integrated systems, error compensation methods using separate bias Kalman filter are suggested for both the loosely-coupled and the tightly-coupled GPS/INS integration systems. Linearized error models for the position and velocity matching GPS/INS integrated systems are Int derived by linearizing with respect to its time-delay and augmenting the delay-state into the conventional state equations for each case. And then separate bias Kalman Inter is introduced to estimate the time-delay during only initial navigation stage. The simulation results show that the present method is effective enough resulting in considerably less position error.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.1
• /
• pp.24-36
• /
• 2003

The digital mobile communication will be developed till getting multimedia service in anyone, any where, any time. Theses requiring items are going to be come true via IMT-2000 system. Transmitting signal bandwidth of IMT-2000 system is 3 times as large as IS-95 system. That is mean peak to average of signal is higher than IS-95A system. So we have to design it carefully not to effect in adjacent channel. HPA(High Power Amplifier) located in the end point of system is operated in 1-㏈ compression point(Pl㏈), then it generates 3rd and 5th inter modulation signals. Theses signals affect at adjacent channel and RF signal is distorted by compressed signal which is operated near by Pl㏈ point. Then the most important design factor is how we make HPA having high linearity. Feedback, Pre-distorter and Feed-forward methods are presented to solve theses problems. Feed-forward of these methods is having excellent improving capacity, but composed with complex structure. Generally, Linearity and Efficiency in power amplifier operate in the contrary, then it is difficult for us to find optimal operating point. In this paper we applied algorithm which searches optimal point of linear characteristics, which is key in Power Amplifier, using minimum current point of error amplifier in 1st loop. And we made 2nd loop compose with new structure. We confirmed fabricated LPA is operated by having high linearity and minimum current condition with ACPR of -26 ㏈m max. @ 30㎑ BW in 3.515㎒ and ACLR of 48 ㏈c max@${\pm}$㎒ from 1W to 40W.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.185-188
• /
• 2009

Purpose: Standard of retests were discrepant and inconsistent due to inaccuracy and lack of standardization within normal range limit of tumor marker test. To enhance the standardization of retests set standard value below normal range and the Order Communication System Quality Control (OCS QC) program was put in place. This program enables managing the results within lower limit of normal range which were used for tumor marker test in Health Center. Materials and Methods: At present the tumor marker study for AFP, CEA, CA19-9, CA125, and PSA included outpatients in Asan Medical Center from February to March, 2009. The standard value was obtained by using the percentage of CV of Inter Assay according to the normal range of each tumor test. The results were confirmed by using the OCS QC program via formatted assessment of screening test such as test items, standard value and medical department. The number of out-of-range results within plus and minus 30 percents regarding the five primary items of tumor marker test was assessed. The next step was to obtain the number of AFP, CEA, and CA125 according to the ratio of comparison between prior and post test result, 60%, 50%, and 40% within normal range, respectively. In addition, set standard value below normal range. Results: The first screening test with percentage of sample number was resulted between 30%-40% and the second one was AFP 26.1%, CEA 18.9%, CA19-9 17.3%, CA125 18.7%, and PSA 21.0% obtained screening percentage of average 20 percents. The limited value of retest was AFP less than 5.0 and more than 10.0, CEA less than 1.0 and more than 3.0, CA19-9 less than 10.0 and more than 30.0, and PSA less than 1.0 and more than 2.0 to set and the number of retest was obtained by applying to the limited value of retest to screening percentage of average 20 percents For two months, the number of retest was AFP 0, CEA 15, CA19-9 3, CA125 2, and PSA 5. Conclusions: Through using the OCS QC program in establishing the standard of retest systemically, there appeared to be reduced discrepancy among the examiners and to be expected improvement in relation to the error of results.