• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2797-2820
• /
• 2015

In order to accommodate huge number of antennas in a limited antenna size, a large scale antenna array is expected to have a three dimensional (3D) array structure. By using the Active Antenna Systems (AAS), the weights of the antenna elements arranged vertically could be configured adaptively. Then, a degree of freedom (DOF) in the vertical plane is provided for system design. So the three-dimension MIMO (3D MIMO) could be realized to solve the actual implementation problem of the massive MIMO. However, in 3D massive MIMO systems, the pilot contamination problem studied in 2D massive MIMO systems and the inter-cell interference as well as inter-vertical sector interference in 3D MIMO systems with vertical sectorization exist simultaneously, when the number of antenna is not large enough. This paper investigates the interference management towards the above challenges in 3D massive MIMO systems. Here, vertical sectorization based on vertical beamforming is included in the concerned systems. Firstly, a cooperative joint vertical beams adjustment and pilot assignment scheme is developed to improve the channel estimation precision of the uplink with pilots being reused across the vertical sectors. Secondly, a downlink interference coordination scheme by jointly controlling weight vectors and power of vertical beams is proposed, where the estimated channel state information is used in the optimization modelling, and the performance loss induced by pilot contamination could be compensated in some degree. Simulation results show that the proposed joint optimization algorithm with controllable vertical beams' weight vectors outperforms the method combining downtilts adjustment and power allocation.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.130-133
• /
• 1999

In the view point of further reducing the inter-symbol interferences studied in our previous paper 〔1〕, a quadrature pair of wavelet-based filter banks that are composed of a pair of cosine and sine modulated filter banks is applied to MC-CDMA transmultiplexing. For that fact, the symbol duration gets twice longer than the one in , 〔1〕, the interference effects due to channel overlapping and Doppler spread can be effectively alleviated while increasing the channel utilization efficiency. Moreover, the well-known wavelet properties are exploited to design the prototype filter in such a way to maintain the size of sidelobes much smaller than those of the FFT, the interference reduction effect can be further obtained. To verify the behavior of our proposed quadrature filter bank based MC-CDMA system, the reverse-link bit error rates with respect to SNR under Rayleigh fading and additive white Gaussian noise channel environments are computed. The results show an improved system performance over the conventional MC-CDMA.

• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.803-814
• /
• 2010

In this paper, we propose a frame structure for modified ATSC transmission systems which is used for a terrestrial 3D HDTV broadcasting. The modified ATSC transmission systems [2] see the potential of increasing a transmission capacity at reasonable TOV (Threshold of Visibility) by modifying channel codes of conventional ATSC systems and varying modulations. We use PN symbols (Pseudorandom Noise) in a guard interval which is used for avoiding the ISI (Inter Symbol Interference) to estimate and compensate the time-varying multi path channel effectively with a maximum transmission payload. With PN symbols in the guard interval, a CIR (Channel Impulse Response) in a time domain can be estimated and a compensation in a frequency domain can be achieved for the accurate channel estimation and compensation. The prosed frame structure is applied to the modified ATSC systems and computer simulations are performed for SER (Symbol Error Rate) performances in TU (Typical Urban)-6 Channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1564-1572
• /
• 2004

UWB(Ultra Wide Band) under standardization for WPAN has a restriction in transmitting power because of interference with existing systems. To overcome the restriction, in this paper, we construct the MIMO(Multi-input-Multi-Output) channel using multi-transmit/receiver antennas and analyze the performance of the proposed system. In addition, through numerical simulation, we obtain the interference property among these antennas and analyze the effect of an interference to the system. The proposed UWB system has a ML detector and the least square method will be used to cancel the multi-user interference and the inter symbol interference caused by multipath.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.693-696
• /
• 2008

The systems for mobile communication services of fourth generation use OFDM (Orthogonal Frequency Division Multiplexing) scheme that ran transmit large amounts of data to support the multimedia services, and consist of several types of cell, such as Macro Cell, Pico Cell, Femto Cell to improve the qualify of service. According to subdivision of communication region, superposition of cells in co-channel different from conventional single cell is used, but it cause inter band interference between systems. In particular, an OFDM signal consists of a number of independently modulated subcarriers, and superposition of these subcarriers causes a problem that ran give a large PAPR. Increased PAPR induces signal distortion passing through components such as power amplifier so that inter band interference is caused by out-of-band spectrum radiation. In order to minimize the inter band interference, this paper applies PAPR reduction scheme and analyzes the out-of-band spectrum radiation when the signal passes through nonlinear components such an power amplifier.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9A
• /
• pp.835-843
• /
• 2010

Energy spreading transform (EST) based equalization is a very effective technique to remove inter symbol interference (ISI) in frequency selective channel. EST based system uses cyclic prefix (CP) similar to orthogonal frequency division multiplexing (OFDM) system. Since CP is a redundancy, it degrades the data transmission rate. RISIC is an algorithm that removes an inter block interference (IBI) caused by insufficient CP length and reconstructs CP. In this paper, we propose a system that combines the existing EST system with quadrature phase shift keying (QPSK) modulation and RISIC algorithm to enhance the efficiency of the transmission. Also we extend the proposed system to 16 quadrature amplitude modulation (QAM) modulation. The proposed system is shown to performance close to matched filter bound (MFB) even with insufficient CP.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.43-46
• /
• 1998

The performance of a receiver that empolys a multi-stage inter-ference cancellation scheme for uplink fading channel is analyzed when there is carrier frequency offset. And the conditions to permit the performance improvement are analytically obtained. Numerical results show the effectiveness of the proposed system under Rayleigh fading channel assuming that carrier frequency offset is present.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.635-641
• /
• 2010

Time-varying channel characteristics in OFDM systems over doubly selective channels cause inter-carrier interferences(ICI) in the frequency domain. Time domain windowing gives rise to restriction on the bandwidth of the frequency domain channel matrix and makes it possible to approximate the OFDM system as a simplified linear input-output model. When successive interference cancellation based on linear MMSE estimation is employed for channel equalization in OFDM systems, symbol detection ordering produces considerable effects on overall system performances. In this paper, we show the reduction of the residual ICI by time domain windowing and the resultant performance improvements, and investigate the effects of SINR- and CSEP-based symbol detection ordering on the performance of successive interference cancellation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.43-48
• /
• 2021

We propose 2-channel filter bank method instead of FFT method to decrease sub-channel interference for using of efficient frequency resource in MC-CDMA method. Since a prototype filter of filter bank having wavelet characteristic is designed having more less side-lobe, the nearest co-channel interference and inter symbol interference are decreased efficiently. Since the spreading signal of suggesting MC-CDMA system is being demanded for less chip rate and is not being considering for autocorrelation characteristic, the Walsh code can be used as a optimal orthogonal signal set. We consider bit error rate and signal to noise ratio to estimate the performance of suggested system on condition that white noise channel and arbitrary sinusoidal jammer are existing. As a result of comparing to traditional FFT-based MC-CDMA simulation result, our suggested system has shown better performance than traditional MC-CDMA method on the side of minimizing interference effect.

• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.357-365
• /
• 2009

In an OFDM system, the sampling frequency offset between the transmitter and receiver is known to cause the inter-channel interference (ICI), resulting in performance degradation. Sampling frequency offset can be generally estimated by correlation of the pilot signal within contiguous OFDM symbol. In this paper, we propose sampling frequency offset estimation schemes using various mixture of consecutive symbols. We conduct a simulation in DVB-T(2K mode) system, which shows that the proposed schemes can improve the performance of sampling frequency offset estimation by decreasing noise effect within consecutive symbols in AWGN channel model.