• 농업과학연구
• /
• 제37권3호
• /
• pp.435-449
• /
• 2010

Soils in the sloping uplands in Korea are subject to intensive land use with high input of agrochemicals and are vulnerable to soil erosion. Development of the environmentally sound land management strategy is essential for a sustainable production system in the sloping upland. This report addresses the status of upland agriculture and the best management practices for the uplands toward the sustainable agriculture. More than 60% of Korean lands are forest and only 21% are cultivating paddy and upland. Uplands are about 7% of the total lands and about 62% of the uplands are in the slopes higher than 7%. Due to the site-specificity of the upland, many managerial and environmental problems are occurring, such as severe erosion, shallow surface soils with rocky fragments, and loadings of non-point source (NPS) contaminants into the watershed. Based on the field trials, most of the sloping uplands were classified as Suitability Class III-V and the major limiting factor was slope and rock fragments. Due to this, soils were over-applied with N fertilizer, even though N rate was the recommendation. This resulted in decreases in yield, degradation of soil quality and increases in N loading to the leachate. Various case studies drew management practices toward sustainable production systems. The suggested BMP on the managerial, vegetative, and structural options were to practice buffer strips along the edges of fields and streams, winter cover crop, contour and mulching farming, detention weir, diversion drains, grassed waterway, and slope arrangement. With these options, conservation effects such as reductions in raindrop impact, flow velocity, runoff and sediment loss, and rill and gully erosion were observed. The proper management practice is a key element of the conservation of the soil and water in the sloping upland.

• Journal of Advanced Marine Engineering and Technology
• /
• 제14권4호
• /
• pp.57-66
• /
• 1990

In the design of an electric power plant, the capacity to meet the peak load demand is one of the important factors to be considered. This peak load usually occurs when the most of the cooling air conditioning systems are being operated during daytime in summer season, which inevitably entails the construction of an additional electric power plant. This study is aimed to carry out a basic experiment for the development of a cooling air conditioning system using the ice energy by the surplus electric power during the night-time. The experimental apparatus consists of four major parts; (1) the heating section consisting of the air duct and I.D. fan, (2) the cold section with the ice chamber, (3) the bundle of heat pipes made in a form of the staggered arrangement with ${C_y}/{d_o}$=2.0 and ${C_x}/{d_o}$=1.73, (4) the refrigerator system to cool down the ice chamber. This study involves an intensive experiment concerning the convective heat transfer of the air flow surrounding the bundle of heat pipes. This major experimental parameters are the amount of working fluid, the velocity of air and the working temperature. The major findings of the present study are as follows; (1) The optimum amount of the working fluid necessary for the horizontal heat pipes is much more than that for the vertical type. (2) The convective heat transfer coefficients of the air are coincided with the empirical equations of Grimson and ${\breve{Z}ukauskas}$. (3) The equation of the mean heat transfer coefficient obtained in the present study is ${N_um}=0.32 {Re_max^{0.63}}$.

• 대한물리의학회지
• /
• 제11권4호
• /
• pp.41-47
• /
• 2016

PURPOSE: The purpose of this study was to investigate the effects of differences in exercise time arrangement on the functional recovery of the lower limbs and balance of stroke patients. METHODS: The subjects of this study were 100 patients who were hospitalized in two hospitals located in Gyeonggi-do. Before the experiment, 60 of these patients who met the inclusion criteria and did not meet the exclusion criteria were randomly divided into an experimental group (n = 30), whose exercise time was concentrated, and a control group (n = 30), whose exercise time was diffuse. The two groups underwent six weeks of physical and occupational therapy four times a day for five days a week. One session of therapy took 30 minutes, including three sets of physical therapy and one set of occupational therapy. The rest time between the sessions was different for each group. The experimental group had five minutes of rest between each therapy session, and the control group had two hours of rest time between each session. The Fugl-Meyer assessment (FMA), an assessment of each patient's limit of stability (LOS), and a timed up and go test (TUG) were used as test tools. RESULTS: Both groups showed statistically significant increases in their FMA results, LOS measurements, and TUG results. The FMA results of the experimental group were significantly higher than those of the control group. CONCLUSION: Thus, concentrated exercise time was more effective than diffuse exercise time for the recovery of motor function.

• 한국식품영양학회지
• /
• 제30권1호
• /
• pp.129-138
• /
• 2017

The purpose of this study was to evaluate the satisfaction with school meal service and the food preference in elementary school students who are in their growth period. A total of 484 students (242 boys) participated and completed a questionnaire survey. The results indicated that the merit of school meals was the highest in 'balanced diet'. 'Food hygiene' and 'delicious food' were the most important factors in school meals. Most of the students wanted 'balance between eastern and western foods' and 'new dishes' for the menu of school meals. For the distribution of meals, 'various kinds of side dishes' and 'warmth of dishes' were mainly required. The main problems of the current environment of school meals were 'long waiting time' and 'noise of the cafeteria'. In satisfaction with the school meal service, the highest satisfactory factor was 'staffs' cleanliness', following 'arrangement of furniture in cafeteria' and 'nutrition information-providing'; whereas, the lowest factor was 'staffs' kindness'. In the preference of foods, students preferred 'white rice'; whereas they did not like 'bean rice'; and 'fried rice' was preferred. In side dishes with meat and fish, most of the meats including 'Tangsuyuk' and 'Bulgogi' were preferred. For fish, 'fried hairtail' was preferred; whereas, 'fried Spanish mackerel' was not. In case of kimchi, 'Chinese cabbage kimchi' and 'cubed radish kimchi' were especially preferred. Considering these results, intensive improvement is required to increase school meal satisfaction by understanding the students' needs. An effort to allow the students' preferences to be reflected in the menu is also needed.

• 한국과학교육학회지
• /
• 제41권6호
• /
• pp.483-499
• /
• 2021

교육과정의 '지역화' 정책은 2022 개정 교육과정의 한 방향인 '분권화·자율화' 정책과 밀접한 관련을 맺는다. 이러한 교육과정 정책의 변화는 학생들이 지능 정보 사회 도래, 그린 혁명, 저출산 시대라는 미래사회의 뉴노멀에 대응할 수 있도록 사회변화 대처 역량 함양을 꾀한다. 특히 끝없이 확대되고 변화하는 과학과 교육환경과 컨텐츠를 고려하면 과학과 교육과정의 지역화는 다양성을 통한 전문성으로 나아갈 수 있다는 이점을 갖는다. 본 연구에서는 과학과 교육과정 지역화 정책에 대한 전문가의 인식을 통해 과학과 교육과정 '시·도 교육과정 편성·운영 지침(이하 '지침')'과 성취기준 개정 중심으로 교육과정 개정 시점의 시사점을 확인하였다. 결론적으로 연구 참여자들은 과학과 고유의 특성에 기인하여 교육과정 지역화 확장 가능성이 높다고 보았고, 17개 시·도교육청을 의미하는 지역 수준 지역화와 학교 수준 지역화 사이에 위치하는 시·도내 지역교육청 또는 마을 단위의 지역화 수준을 인식하였으며, 향후 학교 수준까지 지역화가 도달했을 때 교사의 수준이 지역화의 수준이 될 수 있음에 주목하여 교사 역량 등 교원 정책과의 연계 논의가 필요하다고 보았다. 그리고 과학과 교육과정 '지침'의 지역화가 이루어지려면, 이와 병행하여 17개 시·도에 일부 성취기준을 자율적으로 구성할 권한을 부여해야 한다는 공통적인 인식이 나타났다. 그리고 이와 연계되는 과학과 '성취기준의 지역화'를 위해서는 '성취기준의 재구조화 또는 대강화'가 선행되어야 한다고 보았다. 한편, 교육과정 지역화 정책에 의해 과학과 교육과정의 다양화·자율화 측면이 제고될 것으로 예측하면서도, 성취기준의 설정은 평가와 직결되기에 과학과 '지침' 내 평가 항목의 기술이 새롭게 이루어지는 등의 정책의 정교화 필요성을 인식하였다. 마지막으로 과학과 특성을 고려할 때, 수업 소재의 지역화를 넘어서서 지침 자체에 지역별 중점 과학교육 정책을 명시해 담을 필요가 있음을 언급하였다. 본 연구의 결과와 논의는 추후 2022 개정 교육과정에 있어서 과학과 교육과정 지역화의 구체적 거버넌스 구축과 과학과 교육과정 '지침' 및 성취기준 개선에 관한 실질적인 정책 마련에 기여할 수 있을 것이다.

• Journal of Korean Biological Nursing Science
• /
• 제4권1호
• /
• pp.41-49
• /
• 2002

The purpose of this study was to identify the knowledge contents of basic nursing sciences needed by nurses in the practices of the intensive care unit(ICU). To attain the goal of this study, the nurses working at 10 hospitals in the areas of Seoul and Kangwon Province were randomly selected. They were primarily interviewed, and the open question was secondarily put to them through the questionnaire. In the process of the 1st interview, the interviewees were asked of the question, "What is the knowledge of basic sciences such as anatomy, pathology, physiology. microbiology, pharmacology and the like thought to be lacking when you communicate with doctors in the ICU and when you carry out your nursing practices in it?" The contents of the interview were tape-recorded. The period of data collection ranged from May 1, 2001 to Sept 30. The interviews were conducted with total of 20 nurses. The open-end questionnaire was secondarily mailed to nurses. 113 questionnaires were returned. 100 questionnaires except 13 ones thought to be poorly completed in content were used for data analysis. Three coders classified data obtained from the interview and the questionnaire research into 5 detailed items relating to such as anatomical physiology, pathology, pharmacology. microbiology and basics of nursing. The three coders had experiences in nursing education of 18 years, 8 years and 6 years, respectively, and of them one coder was professor in basic nursing sciences. Data were statistically treated using frequency analysis and percentage by the SAS program. As a result, the following findings were obtained : It was found that the contents that ICU nurses responded were most needed in the field of Human structure and function were water and electrolytic balance(38%), blood and circulatory system(20%), changer in the patient's skin(12%), the arrangement of the human body(10%) and the endocrine system(10%), nervous system(6%), and assessment of the state of the patient's consciousness(4%). It was found that the contents that ICU nurses responded were most needed in the field of pathology were found to be the process of the progress of the disease(32%), symptoms of the disease(27%), prognosis of the disease(22%), followed by the injury-healing process, clinical pathological examination, and examination by radiation. It was found that the contents that nurses responded were most needed in the field of pharmacology were the effect of drug(25%), the side effect of drug(22%), the relationship between diseases and drug(20%), the relationship between disease-causing bacteria and drug(20%) and chemotherapy(2%). It was found that the contents that ICU nurses responded were most needed in the field of microbiology were the relationship between diseases and disease-causing bacteria(45%), Kinds and characteristics of disease-causing bacteria(18%), infection control(16%), application of the aseptic technique(12%), isolation(9%) and the like. It was found that the basic knowledge that ICU nurses responded were needed were the identification of the patient's current state(36%), understanding of the therapeutic process(22%), the operating principle of medical equipment and instrument(20%), medical terminology(9%), equipment and instrument management(7%), calculation of the dose of injection(2%) and the like.

• 수산해양기술연구
• /
• 제15권1호
• /
• pp.5-16
• /
• 1979

朴.李등 (1972)이 축양 시험을 할 때에는 축양조 이외에 소형의 예인조를 따로 썼으나, 예인조에서 축양조로 이송이 번거로우므로 업계에서는 축양조를 바로 예인하는 방법이 쓰이고 있다. 그러나, 축양조를 바로 예인하면 앞면의 망지가 뒤로 밀려서 축양조 내부의 용적이 작아지고, 또 예인중 축양조의 속도가 갑자기 느려지면 멸치는 유영 관성으로 말미암아 뒤로 밀린 망지 위로 올라가서, 비늘이 벗겨져서 폐사율이 높아진다. 이를 개량하기 위해 먼저 $\frac{1}{15}$크기의 모형 축양조를 만들어서, 회류수조에서 4가지 방식으로 예인시험을 실시하고, 그 중 합리적이라고 생각되는 2가지 방식을 다시 해상에서 실물시험을 실시하여, 실용상의 문제점을 규명함과 동시에, 축양조의 예인속도는 빠르게 하면서도 축양조 내부의 유속을 느리게 하는 방법도 고안했다

• 대한치과기공학회지
• /
• 제6권1호
• /
• pp.31-86
• /
• 1984

The educational purpose of a junior college is believed to be to effectively train and produce professional workers equipped with the knowledge and skills required in various technical fields of modern society. Since dental technology takes its share of an important role through the enhancement of people's health and the construction of a whlfare society, the prosthodontia department is imposed with a great responsibility to train highly skilled, responsible dental technicians who will meet the social demands. To attain this goal, those who are in charge of the training and education should place emphasis on the development of better educational programs. In other words, the present curriculum which is lacking in many comprehensive aspects, is not satisfactory to provide the students with the required know-how and qualities. As is known, a currculum is the detailed guidance to the efficient operation of an educational program, and that of dental technology is not an exception. In addition, dental technology requires very detailed programs in training, because it requires both diversified and comprehensive application of serveral different fields. The following are the main points to be taken into consideration in developing an effective curriculum for this department. 1. The curriculum should be gradually expanded so that the fundamental subjects will contain principal theories which can be directly applied to the specified majoring subjects. 2. An effective arrangement of time tables should be provided so that basic practice and experiments can be conducted in direct connection with the leatures on the basic theories. 3. For a creative and up-to-date curriculum to help cope with the problems in achieving the aims of technological development and scientific education, intensive and extensive studies should be done on the curricula developed in the advanced countries. 4. The specific majoring subjects should be rearranged to contain new theories which are beneficial to dental technology. As an institution which is spearheaded for ondustrial-educational cooperation, the Junior collegeis role demands that the department should make every possible effect to cultivate highly-skilled technicisns. The following suggestions are made to help work out an ideal curriculum. 1. The basic theory subjects should be selected with consideration toward closely related majoring subjects. 2. The curriculum should be efficiently operated to effectively relate theories with experiments. 3. Subject importance must be rearranged ; It has been found that the ideal proportion of cultural, elective and required subjects is 20%, 20% and 60% respectively. 4. The credit allotments should be reconsidered: The total credits required for completion should preferably be 80; 16 for the cultural and the elective subjects respectively and 48 for the required subject. 5. A Commissioned education system should be formalized for strengthening industrial educational cooperation. 6. Experiments and practice should be intensified with the support of improved laboratory facilities. 7. The training period should be expanded form the present two years to three of four years, in order to produce more highly qualified technicians.

• 교육시설 논문지
• /
• 제25권1호
• /
• pp.13-24
• /
• 2018

Planning and designing training facilities has been developed from educational facilities, and increasingly diversified society has raised a need for facilities dedicated to training and education in a differentiated space separate from the one for regular works. This particular need of our times has led to the expansion of training facilities nationwide although they have something to be desired when it comes to planning and designing with sustainability associated with the locational characteristics of urban space as well as the unique types of facilities taken into account. Against this backdrop, this study will examined a variety of training facilities that have been established since 2000 through theoretical review and conduct intensive analysis on the characteristics of the planning aspects to suggest their significance and implications and to present the overall meanings and ramifications of planning approaches in consideration of new challenges modern training facilities are faced with, which have been revealed through architectural design competitions in recent years. The relevant implications are as follows. First, one of the locational advantages of training facilities, which is commanding beautiful scenery of the surrounding area, can be considered as intent to stress the aspect of a resort, one of the functions of any training facilities. As this study has demonstrated, many training facilities are located near around a beach or a lake. Second, training facilities can be classified into three different types in terms of their location: urban, suburban and resort and such locational characteristics are directly related to intended programs and differentiated links with target users. Third, the architectural styles of training institutes are differentiated in terms of harmonious arrangement between beautiful natural scenery and buildings in consideration of the layout characteristics of major facilities and the distance of ramps in and out of the facilities along with architectural features, including the transparency of building elevation and the type of slopes of roof structure. Fourth, the individual lodging buildings feature a variety of types depending on the design concept with different roles depending on the directional aspects such as the connection of ramps and the relations with the outside. Fifth, outdoor space plans are differentiated according to the intended purpose of training facilities. When it comes to gym facilities, for example, different outdoor space plans are found to be made depending on the original design concept such as outdoor playground-centered planning or golf facilities.

• Composites Research
• /
• 제32권5호
• /
• pp.216-221
• /
• 2019

Piecewise Integrated Composite (PIC) 보는 하중 유형에 따라 구간을 나누어, 각 구간마다 하중 유형에 강한 복합재료의 적층 순서를 배열한 보이다. 본 연구에서는 보의 거동을 고려하여 PIC 보의 구간을 머신 러닝을 통해 나누어 기존에 제시되었던 PIC 보에 비해 우수한 굽힘 특성을 갖게 하는 것이 목적이다. FE 모델의 240개 요소가 참조점으로 선택되었다. 선행 유한요소해석은 머신 러닝의 학습데이터 생성을 위하여 규칙적으로 분포된 참조점에서 3축 특성 값(Triaxiality)으로 나타냈다. 3축 특성 값은 인장, 압축 그리고 전단의 하중유형을 나타낸다. 머신 러닝 모델은 하이퍼파라미터(Hyperparameter)와 학습데이터로 구성되었으며, 하이퍼파라미터 튜닝을 통해 적절한 하중 충실도를 도출하였지만, 거동이 큰 보의 옆면에서는 적절하지 않은 하중 충실도가 도출되었다. 이를 해결하기 위하여 고르게 배치한 참조점을 보의 거동에 따라 배치하여 학습 데이터를 얻었고, 머신 러닝 모델이 생성되었다. 앞서 생성된 머신 러닝 모델을 통하여 보가 매핑 되었고, PIC 보에 대하여 유한요소 해석을 진행한 결과, 기존에 제시되었던 PIC 보에 비해 최대하중과 흡수 에너지가 커지는 특성이 나타났다.