• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.3
• /
• pp.24-35
• /
• 2014

This paper examines, from the perspective of the structure-conduct-performance (S-C-P) paradigm, the structural factors that determine R&D concentration in industries. The results are as follows. First, an industry's R&D concentration is directly related to its market concentration, R&D intensity, capital intensity, and technological opportunities. In contrast, the higher an industry's performance, the more likely the diffusion of R&D investment is for firms belonging to that industry. Second, an industry's R&D concentration has a positive effect on its market concentration but a negative effect on its performance, suggesting that governments should adopt R&D policies that would induce more firms to invest in R&D instead of focusing only on a few firms to enhance industry performance.

• Geotechnical Engineering
• /
• v.14 no.2
• /
• pp.9-20
• /
• 1998

The earthquake-induced liquefaction of ground brings high possibility of failure of lifeline. If subsurface liquefaction is detected immediately after an earthquake the damage caused by the failure of lifeline can be reduced. The goal is achieved by deploying many accelerometers in the area of possible liquefaction and collecting records through a wireless network. This paper attempts to develop a measure to interpret the collected data oft surface motion and to assess the thickness of liquefied layers. For this purpose. both analysis of earthquake records and shaking table tests on model ground were carried out. It was shown that the thickness of liquefied layers can be assessed by using the maximum acceleration and the spectrum intensity at the surface.

• Journal of Environmental Science International
• /
• v.22 no.3
• /
• pp.319-329
• /
• 2013

In this study, the cause of rapid intensity change of typhoon Nakri(0208) in view of point of a trough-typhoon interaction using diagnostic methods was examined based on 6-hourly GDAPS data from 10 to 13 July, 2002. At 0000 UTC 13 July, high PV(Potential Vorticity) region moved southeastward, reaching to the western edge of the Korean peninsula and near typhoon center at surface and there shows an increasing value of EFC(Eddy Momentum Flux Convergence). Also, as the trough and typhoon approach one another at the same time, the vertical shear(850-200 hPa) increases to more than 15 m/s. Thus, it might be concluded that the trough-typhoon interaction made intensified significantly, providing the fact that typhoon Nakri(0208) underwent substantial weakening while moving northward to around Jeju island.

• Physical Therapy Korea
• /
• v.17 no.4
• /
• pp.26-34
• /
• 2010

The purpose of this study was to compare the trunk and lower extremity muscle activity induced by six different conditions floor, intensity 0, 1, 3, 5 of whole body vibration (WBV), and Swiss ball during bridging exercise. Surface electromyography (EMG) was used to measure trunk and lower extremity muscles activity. Ten elderly women were recruited from Hong-sung Senior Citizen Welfare Center. The collected EMG data were normalized using reference contraction (during floor bridging) and expressed as a percentage of reference voluntary contraction (%RVC). To analyze the differences in EMG data, the repeated one-way analysis of variance was used. A Bonferroni's correction was used for multiple comparisons. The study showed that EMG activity of the rectus abdominis, external oblique, internal oblique, erector spinae and rectus abdominis muscles were not significantly different between six different conditions of during bridging exercise (p>.05). However, there were significantly increased EMG activity of the rectus femoris (p=.034) in the WBV intensity 0, 1, 3, and 5 conditions compared with the floor bridging condition. EMG activity of the medial gastrocnemius were significantly increased in the WBV intensity 0, 1, 3, 5 and Swiss ball conditions compared with the floor bridging condition. Future studies are required the dynamic instability condition such as one leg lifting in bridging.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.4
• /
• pp.307-313
• /
• 2009

Quantitative analysis of optical scattering intensities from a Au nanoparticle with a diameter of 100 nm, which is effected by the localized surface plasmon resonance (LSPR), were numerically carried out by using a dark-field detection scheme on prism basal plane for two different beam incident modes of reflectance (R-mode) and transmittance (T-mode). Two-dimensional finite difference time domain (FDTD) algorithm was adopted, and its applicabilibility was verified by comparing the simulation results with the theoretical ones. Simulation results of the scattered light intensities from a Au nanoparticle revealed that the scattered intensity of the T-mode was much stronger than that of R-mode. Comparison of the calculated results with the theoretical intensity distribution on the prism showed that the scattered intensity is marimized when the evanescent field, which is generated from the interface of prism and air at TIR angle, is coupled with Au nanoparticle.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.286-291
• /
• 2001

Most cracks in the structure occur under mixed mode loadings and those propagation depend on the stress ratio very much. So, it is necessary to study the fatigue behavior under mixed mode loading as stress ratio changes. In this paper, fatigue crack propagation behavior was investigated respectively at stress ratio 0.1, 0.3, 0.5, 0.7 and we change loading application angle to $0^{\circ},\;30^{\circ},\;60^{\circ}$ to apply various loading. mode. The mode I and II stress intensity factors of CTS specimen used in this study were calculated by displacement extrapolation method using FEM(ABAQUS). Using both the study through the experiment and the theoretical study through FEM analysis, we studied the relation between crack propagation rate and stress intensity factor range at each loading mode due to the variation of stress ratio. Also, when the crack propagated under given stress condition and given loading mode condition, we studied what the dominant factors of the crack propagation rate were at each case.

• Journal of muscle and joint health
• /
• v.8 no.1
• /
• pp.51-64
• /
• 2001

The purposes of this study were to examine and to predict the affecting factors on exercise participation of Rheumatoid arthritis Patients. The subjects were 161 adult out-patients who visited the hospital for rheumatic disease in H-university. Data were composed of self-reported questionnaire. The conceptual model of this study consisted of that personal characters(age, marriage, education, income), situational characters(pain intensity, fatigue, IADL, depression), behavioral characters(formerly exercise behavior, life-style), and cognitive-perceptional characters(perceived health status, perceived benefit, perceived barrier, perceived self-efficacy) affected directly to exercise participation. Logistic regression analysis was applied for testing model of this study. The results were as follows : 1. Personal characters(education), situational characters(pain intensity), behavioral characters(formerly exercise behavior, life-style), and cognitive characters(perceived barrier, perceived self-efficacy) were significant difference between current exercise participants(127subjects) and non-exercise participants(34). 2. Personal characters(income), situational characters(pain intensity), behavioral characters(life-style), and cognitive-perceptional characters(perceived barrier, perceived self-efficacy) were correlated to exercise participation. 3. Formerly exercise behavior, perceived barrier, and perceived self-efficacy were significant predictor of exercise participation. The logistic equation predicted overall 81.94% of this study subjects 161.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.2000-2006
• /
• 2000

The enhancement of service life of damaged or cracked structures is currently major issue to the researchers and engineers. In order to improve the life of cracked aging aircraft structures, the repair technique which uses adhesively bonded boron/epoxy composite patches is being widely considered as a cost-effective and reliable method. This paper is to study the performance of the bonded composite patch repair of a plate containing an inclined central through-crack. A 3-dimensional finite element method having three layers to the cracked plate, composite patch and adhesive layer, is used to compute the stress intensity factor. In this paper, the reduction of stress intensity factors near the crack-tip are determined to evaluate the effects of various non-dimensional design parameter including composite patch thickness, and material properties of the composite patch and thickness of the adhesive layer, materials of patch etc., and the crack length, Finally, The problem of how to optimize the patch geometric configurations has been discussed.

• 한국해양학회지
• /
• v.12 no.1
• /
• pp.7-12
• /
• 1977

Vertical mixing in the ocean affects the formation of water masses as well as the vertical distribution of nutrients and dissolved substances. this study is to investigate the effect of stability on the intensity of vertical transfer in the case of shallow and straitfied channel. It is found that the relation of the stability and vertical turbulent diffusion is given by K$\sub$z/ = -${\beta}$-(c+${\beta}$) / ${\alpha}$(E-1/${\alpha}$) where K$\sub$z/ and E denotes the vertical turbulent diffusion coefficient and stability, respectively. The empirical coefficients ${\alpha}$, ${\beta}$ and c depend on the magnitude of vertical components and stability, i.e., through thermocline intensity. The study indicates that the diffusivity of the surface mixed layer is (K$\sub$z/)=300∼1,200$\textrm{cm}^2$/sec, the thermocline layer is (K$\sub$z/)= 50∼200$\textrm{cm}^2$/sec and the cold layer is (K$\sub$z/)=200∼600$\textrm{cm}^2$/sec based on near- minimum least-squares error estimates from the regression analysis. An important result of our study comes out that the model is in accordance with the general trends of the effect of stability on the vertical turbulent diffusion coefficients in the case of shallow and strongly stratified channel.

• Journal of Korean Society of Rural Planning
• /
• v.10 no.3 s.24
• /
• pp.41-51
• /
• 2004

This study aims to develop a potential evaluation method for urban spatial expansion using remote sensing (RS) and geographic information system (GIS). A multi-criteria evaluation method with several criteria and their weighting values was introduced to evaluate the score and quantification of the potential surface around the existing cities. The six criteria with one geographic factor, slope, and five accessibility factors, time distance from center of the city, national road, interchange of expressway, a big city, and station, were defined for the potential. RS techniques were applied for classification of the actual urban expansion maps between two periods, and GIS functions were used for score of accessibility criteria with a distance decay function from geographic, road and several point maps, which was developed in this study. The new methodology was applied to a test area, Suwon, between 1986 and 1996. In order to optimize the six weighting values, this study made new findings to search the optimal combination of the weighting values from new methodology, weighted scenario method for intensity order (WSM), combined with intensity order and AHP method, including a trial and error method for sensitivity analysis to make the intensity order. The optimal combination of the weighting values by the new method generated the optimal potential surface, considering spatial trend of urban expansion in the test area.