• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.445-452
• /
• 2015

Software reliability in the software development process is an important issue. Software process improvement helps in finishing with reliable software product. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, proposes the reliability model with log and power intensity function (log linear, log power and exponential power), which made out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on mean square error (MSE) and coefficient of determination($R^2$), for the sake of efficient model, was employed. Analysis of failure, using real data set for the sake of proposing log and power intensity function, was employed. This analysis of failure data compared with log and power intensity function. In order to insurance for the reliability of data, Laplace trend test was employed. In this study, the log type model is also efficient in terms of reliability because it (the coefficient of determination is 70% or more) in the field of the conventional model can be used as an alternative could be confirmed. From this paper, software developers have to consider the growth model by prior knowledge of the software to identify failure modes which can be able to help.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.4 s.28
• /
• pp.542-554
• /
• 1989

The skyrocketing inflation of medical costs has become a major health problem among most developed countries. Korea, which recently covered the entire population with National Health Insurance, is facing the same problem. The proportion of health expenditure to GNP has increased from 3% to 4.8% during the last decade. This was remarkable, if we consider the rapid economic growth during that time. A few policy analysts began to raise cost containment as an agenda, after recognizing the importance of medical cost inflation. In order to Prepare an appropriate alternative for the agenda, it is necessary to find out reasons for the cost inflation. Then, we should focus on the reasons which are controllable, and those whose control are socially desirable. This study is designed to articulate the theory of medical cost inflation through literature reviews, to find out reasons for cost inflation, by analyzing aggregated data with a deterministic model. Finally to identify determinants of changes in both medical demand and service intensity which are major reasons for cost inflation. The reasons for cost inflation are classified into cost push inflation and demand pull inflation, The former consists of increases in price and intensity of services, while the latter is made of consumer derived demand and supplier induced demand. We used a time series (1983-1987), and cross sectional (over regions) data of health insurance. The deterministic model reveals, that an increase in service intensity is a major cause of inflation in the case of inpatient care, while, more utilization, is a primary attribute in the case of physician visits. Multiple regression analysis shows that an increase in hospital beds is a leading explanatory variable for the increase in hospital care. It also reveals, that an introduction of a deductible clause, an increase in hospital beds and degree of urbanization, are statistically significant variables explaining physician visits. The results are consistent with the existing theory, The magnitude of service intensity is influenced by the level of co-payment, the proportion of old age and an increase in co-payment. In short, an increase in co-payment reduced the utilization, but it induced more intensities or services. We can conclude that the strict fee regulation or increase in the level of co-payment can not be an effective measure for cost containment under the fee for service system. Because the provider can react against the regulation by inducing more services.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.127-136
• /
• 2011

In this study, annual maximum storm events are proposed to determined by the return periods considering total rainfall and rainfall intensity together. The rainfall series at Seoul since 1961 are examined and the results are as follows. First, the bivariate exponential distribution is used to determine annual maximum storm events. The parameter estimated annually provides more suitable results than the parameter estimated by whole periods. The chosen annual maximum storm events show these properties. The events with the biggest total rainfall tend to be selected in the wet years and the events with the biggest rainfall intensity in the wet years. These results satisfy the concept of critical storm events which produces the most severe runoff according to soil wetness. The average characteristics of the annual maximum storm events said average rainfall intensity 32.7 mm/hr in 1 hr storm duration(total rainfall 32.7 mm), average rainfall intensity 9.7 mm/hr in 24 hr storm duration(total rainfall 231.6 mm) and average rainfall intensity 7.4 mm/hr in 48 hr storm duration(total rainfall 355.0 mm).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.248-258
• /
• 2021

The study analyzed the financial determinants of corporate R&D intensity that require more attention from academics and practitioners in the Korean capital market. Domestic small and medium enterprises (SMEs) may face with developing substitutes by making more R&D investments in scale and scope, given the unprecedented economic conditions such as the limitation of importing core components and materials from other nation(s). KOSDAQ-listed SMEs were selected as sample data, whose R&D expenditures may be less than those of large firms during the post-global financial turmoil period (2010~2018). Static panel data model was applied, along with Tobit and stepwise regression models, for examining the validity of results. Logit, probit, and complementary log-log regressions were also employed for a relative analysis. R&D expenditures in the prior year, the interaction effect between the previous R&D intensity and high-tech sector, firm size, and growth rate were significant to determine R&D intensity. Moreover, a majority of explanatory variables were found to change between the years 2011 and 2018, while time-lagged effects between the R&D intensity and growth rate exist. Results of the study are expected to be used for future research to detect optimal levels of R&D expenditures for the value maximization of SMEs.

• Journal of Korea Trade
• /
• v.26 no.5
• /
• pp.23-38
• /
• 2022

Purpose - This research intends to find out whether R&D cost stickiness shows differentiated aspects depending on exports in Korea. A cost behavior that indicates a lower rate of costs decrease when sales decrease than the rate of costs increase when sales increase is called cost stickiness. This sticky cost behavior is caused by considering the adjusting costs. This study aims to empirically verify that R&D cost stickiness is greater in export firms than in non-export firms. We also investigate the effect of exports on R&D cost stickiness is nonlinear. Design/methodology - We obtain data for the analysis from Kis-Value and TS2000 from 2012 to 2020. This study tests for R&D cost stickiness of exports using the cost stickiness model developed by Anderson et al. (2003) that is used in a lot of prior literature. To explore the nonlinear behavior of R&D cost stickiness we include a quadratic term of exports in our model. Findings - The results of our analysis are as follows. First, we observed that R&D costs of export firms are more sticky than that of non-export firms. Our result indicated that export firms are less likely to reduce R&D costs in decreasing sales periods in preparation for future sales recovery. Second, our empirical evidence shows that export firms view R&D costs much favorably. However, we hypothesize that the effect of export intensity on R&D costs may not necessarily be linear. Our result shows the effect of exports intensity on R&D stickiness is thus nonlinear, forming a reverse U-shaped curve. When export intensity exceeds a certain threshold, the growth rate of R&D costs appears to be viewed negatively. Firms with relatively high export intensity do not support R&D costs, viewing them as taking away firms' resources from other more productive costs. On the contrary, those with export intensity under the threshold view R&D costs as beneficial and therefore promote further R&D costs when revenue decreases. Originality/value - The results of this research can contribute academically to the expansion of empirical research on R&D cost stickiness. R&D cost stickiness varies by industry. As a result of our research, the managers of export firms recognize the importance of R&D to lead innovation. We expected that this research contributes to further studies on R&D costs and cost stickiness. Second, this research has implications from a business perspectives. Our findings of export firms' R&D stickiness suggest that export firms' managers should consider keeping the stickiness of R&D when revenue decreases because it is essential for exporting firms to maintain their R&D stickiness to secure long-term competitiveness. R&D stickiness can be used on a practical basis to emphasize the need for continuous investment in exporting firms' R&D activities.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.232-247
• /
• 2005

Purpose. The purposes of this investigation were to discover the possibility of clinical application in the areas of dental implants and bone grafts by investigating the bone formation histologically around specimen which was depending on the intensity of magnetic field of neodymium magnet inside of the specimens. Material and method. 1. Measurement of magnetic intensity - placed the magnet inside of the specimen, and measured the intensity of magnetic field around the 1st thread and 3rd thread of specimen 20 times by using a Gaussmeter(Kanetec Co., Japan). 2. Surgical Procedure - Male rabbit was anesthetised by constant amount of Ketamine (0.25ml/kg) and Rompun (0.25ml/kg). After incising the flat part of tibia, and planted the specimens of titanium implant, control group was stitched without magnet, while experimental groups were placed a magnedisc 500(Aichi Steel Co., Japan) or magnedisc 800(Aichi Steel Co., Japan) into it, fixed by pattern resin and stitched. 3. Management after the surgery - In order to prevent it from the infection of bacteria and for antiinflammation, Gentamycin and Ketopro were injected during 1 week from operation day, and dressed with potadine. 4. Preparation of histomorphometric analysis - At 2, 4 and 8 weeks after the surgery, the animals were sacrificed by excessed Ketamine, and then, specimens were obtained including the operated part and some parts of tibia, and fixed it to 10% of PBS buffer solution. After embedding specimens in Technovit 1200 and B.P solution, made a H-E stain. Samples width was 75$\mu$m . In histological findings through the optical microscope and using Kappa image base program(Olympus Co. Japan), the bone contact ratio and bone area ratio of each parts of specimens were measured and analyzed. 5. Statistical analysis - Statistical analysis was accomplished with Mann Whitney U-test. Results and conclusion. 1. In histomorphometric findings, increased new bone formation was shown in both control & experimental groups through the experiment performed for 2, 4 & 8 weeks. After 4 weeks, more osteoblasts and osteoclasts with significant bone remodeling were shown in experimental groups. 2. In histomorphometric analysis, the bone contact ratios were 38.5% for experimental group 1, 29.5% for experimental group 2 and 11.9% for control group. Experimental groups were higher than control group(p<0.05) (Fig. 6, Table IV). The bone area ratios were 60.9% for experimental group 2, 46.4% for experimental group 1 and 36.0% for control group. There was no significantly statistical difference between experimental groups and control group(p<0.05) (Fig. 8, Table VII) 3. In comparision of the bone contact ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group at the 1st thread (p<0.05) and experimental group 1 (1.8mT) was higher than control group at the 3rd thread(p<0.05) (Fig. 7, Table V, VI). 4. In comparision of the bone area ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group and experimental group 1 (4.0mT) at the 1st thread(p<0.1) and experimental group 2(4.4mT) was higher than experimental group 1 (1.8mT) at the 3rd thread(p<0.1) (Fig. 9, Table IX, X). Experiment group 2 was largest, followed by experiment group l and control group at the 3rd thread of implant. There was a significant difference at the 1st thread of control group & experiment group 2, and at 1st thread & 3rd thread of experiment group 1 & 2, and not at control group experiment group 1.(p<0.1)

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.1-9
• /
• 2009

Using the projected 2-dimensional tilted images obtained from the transmission electron microscopy, we can reconstruct the 3-dimensional structures of objects, such as cells. As a preprocessing procedure, the tilted images should be registered and compensated in terms of the spatial position and the intensity difference, respectively. In this paper, we employ the fiducial marker-based approach to perform a registration, and introduce a simple intensity compensation scheme. Based on the transmissivity image formation model, we propose an algorithm that can compensate the components of the illumination and transmissivity of each image according to the tilted angle. Numerical analysis using real images obtained from the transmission electron microscopy are shown in this paper to show the performance of the proposed algorithm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.890-895
• /
• 2002

Cold expansion method is retarded of crack initiation due to the compressive residual stress developed on the hole surface. Previous research has just been study about residual stress distribution in the hole surrounding. But, The purpose of this study was to improve the understanding of the residual stress effect in hole surrounding as crack growth from another hole. In this paper, it is shown that residual stress is redistributed due to the application of cold expansion process for CT specimen using finite element method. It is further shown that tensile stress increases in proportion to cold expansion ratio in the vicinity of crack. It is thought that stress intensity factor increases with cold expansion ratio.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.164-170
• /
• 2006

Millimeter waves can be used for high resolution ranging and imaging. As the necessity of high-speed multimedia communication increases, millimeter wave systems are being developed since they are useful for wide band communication considering the shortage of available spectrum bands. However, it is necessary to analyze the characteristics of millimeter propagation in the atmosphere to assess the performance of millimeter wave systems. MCF and intensity fluctuations describe atmospheric effects on millimeter wave propagation. Using the quasi-optical method, a method is investigated to obtain MCF from the intensity distribution of focal plane. Also, a practical method is proposed to compute MCF from the flux measurement in the antenna focal plane.

• Earthquakes and Structures
• /
• v.4 no.1
• /
• pp.109-132
• /
• 2013

Current codes incorporate simplified methods for the prediction of acceleration demands on secondary structural and non-structural elements at different levels of a building. While the use of simple analysis methods should be advocated, damage to both secondary structural and non-structural elements in recent earthquakes have highlighted the need for improved design procedures for such elements. In order to take a step towards the formation of accurate but simplified methods of predicting floor spectra, this work examines the floor spectra on elastic and inelastic single-degree of freedom systems subject to accelerograms of varying seismic intensity. After identifying the factors that appear to affect the shape and intensity of acceleration demands on secondary structural and non-structural elements, a new series of calibrated equations are proposed to predict floor spectra on single degree of freedom supporting structures. The approach uses concepts of dynamics and inelasticity to define the shape and intensity of the floor spectra at different levels of damping. The results of non-linear time-history analyses of a series of single-degree of freedom supporting structures indicate that the new methodology is very promising. Future research will aim to extend the methodology to multi-degree of freedom supporting structures and run additional verification studies.