• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.1058-1062
• /
• 1996

The assessments of weld defects by fracture mechanics are performed for design of welded Joints. In general, butt, T-type, and L-type welded joint are useful for welding structure. When linear weld defects are in welded joint, stress intensity factors for each joints are calculated by finite element method. Analysis results are shown for the fracture modes and characteristics of joint types. And they are founded for the weaken order of welded joints being T-type, butt, L-type.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.80-87
• /
• 1996

The present paper will give some results of the fatigue behavior of typical axi-symmetric forward extrusion die. The extrusion process is analyzed by rigid-plastic FEM and the deformation analysis of extrusion die is conducted by elasto-plastic FEM. To approach the crack problem LEFM (Linear Elastic Fracture Mechanics) is introduced. Using special element in order to conside the sigularity of stress/ strain in the vicinity of the crack tip, stress intensity factor and the effective stress intensity factor is calculated. Applying proper fatigue crack propagation criterion such as Paris/Erdogan fatigue law and maximum principal criterion to these data, then, the angle and the direction of fatigue crack propagation is simulated. In result, it is proved that the simulated fatigue crack propagates in the zigzag path along the radial direction and fatigue life of the extrusion die is evaluated by using the computed crack growth rate.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.434-439
• /
• 2000

In this paper, in order to study the geometric factor effect of a circular hole near a crack tip in a semi-infinite plate, the Dimensionless Stress Intensity Factor, $F(=\frac K {\sigma {\sqrt{\pi a}}})$ is analyzed at the crack tip using a two Dimensional Boundary Element Method (BEM) program which is known as superior in Fracture Mechanics. Kelvin's solution was used as a fundamental solution in BEM analysis and displacement extrapolation method was used to determine Stress Intensity Factor.

• Journal of Biosystems Engineering
• /
• 제20권2호
• /
• pp.117-126
• /
• 1995

High level of tractor noise may reduce operator's work performance and cause a hearing problem. This study was carried out to investigate the cab noise of a selected agricultural tractor. The noise was measured and analyzed in terms of sound and sound intensity levels. Form the results it was known that a structure-born noise was induced from the feet-rest and rear floor panel of the cab. The air-borne noise caused mainly by the engine was transmitted into the operator's position through the small openings of cab structures in the operator's lower front area.

• 말소리와 음성과학
• /
• 제10권2호
• /
• pp.1-6
• /
• 2018

The current study aimed to investigate the transfer of English word stress rules to the production of Korean trisyllabic words by L1 English learners of Korean. It compared English and Korean speakers' productions of seven Korean words from the corpus L2KSC (Rhee et al., 2005). To this end, it analyzed the syllable duration, intensity, and pitch. The results showed that English and Korean speakers' pronunciations differed markedly in duration and intensity. English learners produced word-initial syllables of greater intensity than Korean speakers, while Korean speakers produced word-final syllables of longer duration than English learners. However, these differences between the two speaker groups were not related to the expected L1 transfer. The tonal patterns produced by English and Korean speakers were similar, reflecting L1 English speakers' learning of the L2 Korean prosodic system.

• Journal of Welding and Joining
• /
• 제18권5호
• /
• pp.33-40
• /
• 2000

Fatigue crack propagation life of weld toe crack through residual stress field was estimated with Elber's crack concept. Propagation of weld toe crack is heavily influenced by residual stress caused by welding process, so it is essential to take into account the effect of residual stress on the propagation life of weld toe crack. Fatigue crack at transverse and longitudinal weld toe was studied respectively, which represent typical weld joint in ship structure. Numerical and experimental studies are performed for both cases. Residual stress near weldment was estimated through nonlinear thermo-elasto-plastic finite element method, and residual stress intensity factor with Glinka's weight function method. Effective stress intensity factor was calculated with Newman-Forman-de Koning-Henriksen equation which is based on Dugdale strip yield model in estimating crack closure level U at different stress ratio. Calculated crack propagation life coincided well with experimental results.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1163-1172
• /
• 2001

The two dimensional problem of a layered tribological system(TiN/Steel) containing a vertical surface breaking crack and subject to rolling contact is considered in this study. Using finite elements and stress extrapolation method, a series of preliminary models are developed. Preliminary results indicate that the extrapolation technique is valid to determine Modes I and II stress intensity factors for cracks. In the case of TiN/Steel medium, KI and KII were determined for variations in crack length, layer thickness, and load location. The results show that KII reaches maximum values when the contact is adjacent to the crack where Mode I stresses are compressive. KII values decrease with decreased crack length and significantly decrease for reduced layer thickness.

• 한국결정성장학회지
• /
• 제10권1호
• /
• pp.80-85
• /
• 2000

말토 덱스트린이 첨가된 알루미나 슬러리의 공정조건 변화에 따른 유동특성 변화를 실험계획법과 통계적 방법을 사용하여 분석하였다. 공정조건으로는 말토 덱스트린 첨가 여부, 말토 덱스트린 첨가 전.후에 슬러리에 대한 초음파 처리, 슬러리의 진동기 유지시간 등이 검토되었다. 대부분의 경우 슬러리의 점도는 전단 희석 특성을 나타내었으며 Ostwald-de-Weale 모델에 적합한 것으로 나타났다. 알루미나 슬러리의 점도는 말토 덱스트린이 첨가됨에 따라 감소하였으나 초음파 처리 강도가 증대됨에 따라 증가되었으며, 초음파 처리 전.후에 말토 덱스트린을 첨가하는 것은 슬러리의 점도에 별다른 영향을 미치지는 않았다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2014년도 제50차 하계학술대회논문집 22권2호
• /
• pp.389-390
• /
• 2014

The electrical conduction properties in oriented polypropylene(OPP) were studied over the electric field intensity between 10[MV/m] and 300[MV/m] at the range of temperature from $5[^{\circ}C]$ to $55[^{\circ}C]$ in this study. The range of electrical conduction properties observed at $15[^{\circ}C]$ were divided into five regions with increasing electric field intensity. Particularly, voltage-controlled negative resistance was shown in the region from 70[MV/m] to 82[MV/m].

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2009년도 춘계학술대회 논문집
• /
• pp.196-201
• /
• 2009

KOMPSAT-2 위성영상은 공간해상도가 우수한 1-m급 전정색 영상과, 상대적으로 분광해상도가 우수한 4-m급 다중분광 영상을 동시 취득하는 다중 센서이다. 영상융합기법의 적용을 통해 1-m급 고해상도 다중분광 영상의 취득이 가능하며, 이것은 1-m급에서 식별 가능한 객체들을 분류하고 변화 탐지하는데 활용될 수 있다. 본 연구는 IHS (Intensity-Hue-Saturation) 융합 기법의 I (Intensity) 와 $\delta$ 값을 조정함으로써 새로운 융합기법을 제안하였으며, 육안분석과 상관계수를 가지고 다른 융합기법들과 비교분석하였다. 실험 결과, 제안된 기법의 융합영상은 원본 다중분광영상과 가장 높은 상관계수를 나타내었으며, 상관계수가 유사한 웨이브릿 융합 또는 고대역 필터링과의 육안분석에서 확연히 우수한 공간 선명도를 나타내는 것으로 평가되었다.