• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.2007-2014
• /
• 2000

It has been reported that the dynamic stress intensity factor for a propagating crack is increasing or decreasing according to the increasement of the crack propagating velocity. It is confirmed in this study that the increasement or decreasement of stress intensity factor with crack growing velocity is accused by loading condition. When the crack propagates under a constant displacement along upper and lower boundary in finite plate, the dynamic stress intensity factor decreases according to the increasement of the propagating crack velocity. When the crack propagates under a constant stress along upper and lower boundary in finite plate, the dynamic stress intensity factor increases according to the increasement of the propagating crack velocity. The increasement or decreasement of stress intensity factor with crack growing velocity is greater in a fast crack propagation velocity than in a slow one.

• 대한기계학회논문집A
• /
• 제36권2호
• /
• pp.149-156
• /
• 2012

파괴역학에서 가중함수는 응력확대계수를 계산하기 위하여 사용되어진다. 본 논문에서는 균열을 가진 횡등방성 압전재료에 대한 전기-기계적 분석을 행하여 평면변형률 상태의 압전문제를 Leknitskii 해석법으로 풀었고 가중함수이론을 압전재료에 확대 적용하였다. 가중함수이론을 이용하여 응력확대계수와 전기변위확대계수를 구하였다.

• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.91-94
• /
• 2012

Arrayed waveguide grating (AWG) phase errors are normally assessed from the Fourier transform of the interference intensity data in the frequency domain method. However it is possible to identify the phases directly from the intensity data if one adopts a trial-and-error method. Since the functional form of the intensity profile is known, the intensities can be calculated theoretically by assuming arbitrary phase errors. Then we decide the phases that give the best fit to the experimental data. We verified this method by a simulation. We calculated the intensities for an artificial AWG which is given arbitrary phases and amplitudes. Then we extracted the phases and amplitudes from the intensity data by using our trial-and-error method. The extracted values are in good agreement with the originally given values. This approach yields better results than the analysis using Fourier transforms.

• 조명전기설비학회논문지
• /
• 제26권3호
• /
• pp.46-52
• /
• 2012

During the past decades, energy and Green House Gas(GHG) emissions has risen as a global issue. This paper is about the energy intensity and the GHG intensity in a university campus using the weighting factor of total occupied time to the members of the university. Through this analysis, we could separately estimate GHG intensity per full-time and part-time members under the situation that the measuring data is not perfect. This analyzing procedure could be applied to other non-manufacturing institutions such as school, hospital, governmental institute, office building etc.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.30-40
• /
• 1999

The possibility of the characterization of sheet formation by image analysis with transmitted light was evaluated. Specific perimenter, average perimeter and variation could not be used to predict the sheet formation because there were no corrleation. Although image analysis method still have a lot of problems , it was found that the contrast intensity obtained by image analysis with transmitted light can be used to predict the sheet formation. In the case of highly filled sheet, the intensity of transmitted light was too low to characterize the sheet formation . However, it was possible to characterize the formation of unfilled heavy weight paper($\leq$200g/㎡).

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1794-1804
• /
• 1993

The thermal stress intensity factors for interface cracks of Griffith and symmetric lip cusp types under vertical uniform heat flow in a finite body are calculated by boundary element method. The boundary conditions on the crack surfaces are insulated or fixed to constant temperature. The relationship between the stress intensity factors and the displacements on the nodal point of a crack tip element is derived. The numerical values of the thermal stress intensity factors for interface Griffith crack in an infinite body and for symmetric lip cusp crack in a finite and homogeneous body are compared with the previous solutions. The thermal stress intensity factors for symmetric lip cusp interface crack in a finite body are calculated with respect to various effective crack lengths, configuration parameters, material property ratios and the thermal boundary conditions on the crack surfaces. Under the same outer boundary conditions, there are no appreciable differences in the distribution of thermal stress intensity factors with respect to each material properties. But the effect of crack surface thermal boundary conditions on the thermal stress intensity factors is considerable.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권1호
• /
• pp.281-288
• /
• 2019

This study examines the relationship between R&D intensity and disclosure. R&D activities are essential in bringing innovation to companies. However, R&D activities are naturally uncertain and increase information asymmetry. Thus, firms with high R&D activities are more likely to have the incentive to communicate the potential of R&D investment to the market through voluntary disclosure and, concurrently, resolve information asymmetry. Meanwhile, incentives to less voluntary disclosure exist because of the proprietary cost and the risk of competitiveness loss. Furthermore, the uncertainties inherent in R&D activities caused the possible decrease in the information accuracy. For the two opposing views, this study investigates the relationship between R&D intensity and disclosure frequency using the Regulation Fair Disclosure data in Korea. Moreover, the relationship between R&D intensity and usefulness of the information disclosed is also examined. Using firm sample listed in the 2011-2016 Korea Stock Market, results show that firms with high R&D intensity make disclosures more frequent. Subsequently, the analysis using forecast sample shows that management forecast error is higher in firms with high R&D intensity. This research contributes to the existing literature by presenting evidence that R&D intensity is a significant factor affecting manager's disclosure behavior and information usefulness.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권7호
• /
• pp.501-508
• /
• 2021

The largest source of revenue in Indonesia comes from the taxation sector. Taxes increase the state revenue, which the government utilizes for building public facilities and infrastructures, providing subsidies to the public, financing public interests, and so on. In addition to producing revenue, taxes may be used to promote economic stability. Thus, this study aims to examine and analyze the financial aspects of tax aggressiveness. The financial aspects include leverage, capital intensity, inventory intensity, and earning management. The population used in this study was manufacturing companies listed on the Indonesia Stock Exchange (IDX) for the 2016-2019 period. Data analysis was carried out based on Eviews, with a selected sample of 32 companies of four observation years. Therefore, the number of samples was 128. The results of this study revealed that the best estimation model to use is the Fixed Effect Model (FEM). This study proved that leverage and earning management had a positive and significant effect on tax aggressiveness. In contrast, capital intensity and inventory intensity did not affect tax aggressiveness. In addition, the result of this study is still far from perfect. It is, therefore, hoped that further research can add other variables to find better results.

• 융합신호처리학회논문지
• /
• 제3권3호
• /
• pp.47-53
• /
• 2002

본 논문은 동영상의 대표프레임에서 eigen value와 휘도 성분을 이용한 내용기반 검색 기법에 관한 연구이다. video를 shot단위로 분할하여 shot을 대표하는 대표프레임을 얻어내고, 그 대표프레임을 Eigen Component Analysis(ECA)를 이용하여 데이터베이스를 생성하여 shot들의 휘도값 분포를 구한다. 생성된 코드북과 각 대표 프레임에 대한 코드북 인덱스 값, 휘도값을 database화하여 질의 영상과 video database간의 저장된 비디오들의 코드북과 코드워드간의 유클리디안 거리를 이용하여 유사도 높은 비디오를 찾고, 검색되어진 video에 포함된 대표프레임들의 코드북 인덱스 값과 입력 영상의 코드북 인덱스 값을 비교하여 입력 영상의 특징과 가장 유사한 대표프레임을 얻어낸다. 실험결과 제안된 방법이 검색에 있어서 영상의 형태에 대한 전체적인 특징을 제공하는 대표프레임의 eigen value와 휘도 성분을 이용함으로서 보다 검색 결과가 우수하며, 영상의 통계적인 특성을 이용함으로서 시간과 메모리 공간을 줄일 수 있음을 확인하였다.

• 자원ㆍ환경경제연구
• /
• 제20권2호
• /
• pp.229-254
• /
• 2011

본 논문은 LMDI(Log Mean Divisia Index) 방법론을 이용하여 국내 제조업의 온실가스 배출에 대한 요인분해분석을 하였다. 국내 제조업의 온실가스 배출에 대한 요인분해는 크게 생산효과, 구조효과, 집약도효과, 에너지믹스효과, 배출계수효과 등 다섯 가지 요인으로 분해하였다. 1991년~2007년까지 국내 제조업의 온실가스 배출변화 요인을 분석한 결과를 보면 국내 제조업의 온실가스 배출은 대부분 생산효과에 의해서 증가하였다. 구조효과와 집약도는 온실가스 배출을 줄이는 역할을 하였으며, 구조효과보다는 집약도효과가 더 많이 온실가스 배출을 감소시키는 방향으로 작용하였다. 그리고 에너지믹스효과와 배출계수효과는 다른 효과들에 비해서 그 비중이 작지만 온실가스 배출 증감에 영향을 미치고 있다. 에너지믹스효과는 온실가스 배출 증가 요인으로 배출계수효과는 감소요인으로 작용하였다. 한편 시계열로 에너지 소비를 요인분해 해 본 결과 1998년 IMF 체제를 전후로 온실가스 패턴에 변화가 일어났다. IMF 체제 이후로 구조효과와 집약도효과에 의한 온실가스 감축이 IMF 체제 이전보다 더욱 두드러진 것이 특징이다. 2001년 이후 진행된 신고유가 시대를 맞이해서는 구조효과와 집약도효과가 더욱 촉진되었다.