• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.750-757
• /
• 2012

This paper focuses on human adaptive HVAC system that can regulate the thermal comfort of the resident in intelligent buildings. The thermal comfort is represented in this paper by PMV (Predicted Mean Vote) as defined by ISO 7730. This PMV value indicates how hot or cold a resident feels by considering temperature, humidity, resident's metabolic rate, relative air velocity, and clothing insulation. In order to develop such a system, a location detection system based on ZigBee module was used along with temperature sensors, other environment sensors. The human adaptive HVAC system was evaluated experimentally on a test bed emulating a room.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.9 no.4
• /
• pp.315-320
• /
• 2009

The popularity of autonomous mobile robots have been rapidly increasing due to their new emerging application areas, from room cleaning, tourist guidance to space explorations. However, the development of a satisfactory control algorithm that will enable the autonomous mobile robots to navigate safely especially in dynamic environments is still an open research problem. In this paper, a newly proposed potential field based control method is implemented, analyzed, and improvements are suggested based on experimental results obtained from simulations. The experimental results are presented to show the effectiveness of the behavior-based control using the proposed potential field generation technique.

• Journal of the Society of Disaster Information
• /
• v.5 no.1
• /
• pp.122-139
• /
• 2009

USN Middleware plays roles of broker between sensors and applications. It collects sensor data, decides the situation and sends the result to the applications. It is not good to decide the situation from one sensor data, because it may error data or reflect small part of all. In this paper, we propose the disaster management model based on the concept 'group' and 'semantic information' from the sensing data. Group is the primary unit to decide the situation. It consists of several sensors which were installed in the same place and had the same pre-defined condition to act. For example, all fire sensors in the room simultaneously trigger the ring when the same pre-defined temperature is recorded. Then, the all fire sensors are included to the same one sensor group. All operations of the intelligent USN middleware are based on the 'group' unit. Disaster information is the result of the interpretation of the sensing data. based on the 'group', the disaster meaning is processed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.80-84
• /
• 1999

Sunlight Collector System is a new way to make sunlight available to living things. It transmits sunlight through fiber optics to wherever is needs. It applies the artificial lighting, underground lighting, intelligent building, museum lighting, restoration-room to health etc. Cutting out most of the ultra-violet and intra-red radiation. In this paper, we measured the spectrum analysis of sunlight and Sunlight collector System's light. Also, we found out the distance to get visible light.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.164-166
• /
• 1999

본 연구에서는 객체지향적 CASE 툴인 ObjecTime을 이용하여 지능형 제조 운영 시스템을 설계/구현하였다. 객체지향적 프로그래밍 방법론과 ROOM(Real-time Object-Oriented Modeling) 방법론을 사용하여 지능형 제조 운영 시스템에서 필요한 객체를 설계하였으며, 이들 객체의 계층도와 관계를 정의하였다. 객체지향적 설계 방법론을 사용하여 설계한 시스템은 모델링 과정에서 실행화일을 얻는 과정까지 발생하는 오류를 최소화할 수 있다는 장점이 있다. 또한, 본 연구에서는 제조 시스템의 모니터링과 제조시스템 운영 소프트웨어의 자료 입력 및 수정을 위한 그래픽 사용자 인터페이스 툴을 제작하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.119-128
• /
• 2004

Recently, the accidents on the sea have arisen due to the increase of the nautical traffic and the digitization of equipments for marine. Therefore, IMO(International Maritime Organization) have provided the recommendation of EMI and EMS for radio communication and equipments of marine from SOLAS convention at July 1st 2002. In this paper, we measured EMC environment on the Hanbada, which is Korea Maritime University training ship, for basic EMC environment of ship. The measuring point was Bridge and Engine Control Room of the ship, we measured at the test point that was set at random. Measured Band is from 30 MHz to 2 GHz, polarization measurement is processed both vertical and horizontal polarization. We analysed the results in consideration of permissible criteria.

• Journal of the Korean Institute of Educational Facilities
• /
• v.25 no.4
• /
• pp.19-30
• /
• 2018

The school classroom is a common living place where students spend 7 to 14 hours a day to prepare for their careers. Therefore, if the ventilation of the classroom is not properly performed, it may lead to the deterioration of learning ability due to the unclear air. The concentration of carbon dioxide in the classroom is reported to be high, and the increase in carbon dioxide concentration has a negative effect on the learner's academic performance. In this context, the purpose of this study is to propose a methodology for intelligent and responsive window opening-closing operation process that can reduce the concentration of $CO_2$ in the classroom in order to build a support space that can create an effective teaching-learning environment for adolescents. The specific objectives are as follows. First of all, we define the concept of window opening-closing operation. Secondly, twe develop the operation process of window opening-closing. Thirdly, we develop an algorithm for real-time window opening and closing (process) (Window Opening-Closing Operation Process). Finally, we verify the intelligent responsive window opening-closing operation process through developing examples of window opening-closing operation process using the parametric design program. This study is a preliminary study to develop algorithms necessary for window opening-closing operation. Based on the first-order algorithm, We simulated window opening-closing operations according to a hypothetical scenario. As a result, This study can show that the window is open and close depending on the $CO_2$ concentration, but the $CO_2$ concentration in the room is higher than outdoors. Consequentially, we suggest that it is necessary to develop an algorithm to supplement these results because window is often not working when the temperature difference between indoor and outdoor in winter is large.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1701-1708
• /
• 2011

A typical day in the subway transportation is used by hundreds of thousands are also concerned about the safety of the various workrooms with high underground fire or other less than in the subway users could be damaging even to be raised and there. In 2010, in fact, room air through vents in the fire because smoke and toxic gas accident victims, and train service suspended until such cases are often reported. In response to these incidents in subway stations, even if the latest IT technology, wireless sensor network technology and intelligent video surveillance technology by integrating fire and structural integrity, such as a comprehensive integrated surveillance system to monitor the development of intelligent urban transit system and are under study. In this study, prior to the application of the monitoring system into the field stations, authors carried out the ZigBee-based wireless sensor networks performance analyzation in the Chungmuro station. The test results at a communications room and ventilation room of the station are summarized and analyzed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.62-62
• /
• 2008

As micro-system move toward higher speed and miniaturization, requirements for embedding the passive components into printed circuit boards (PCBs) grow consistently. They should be fabricated in smaller size with maintaining and even improving the overall performance. Miniaturization potential steps from the replacement of surface-mount components and the subsequent reduction of the required wiring-board real estate. Among the embedded passive components, capacitors are most widely studied because they are the major components in terms of size and number. Embedding of passive components such as capacitors into polymer-based PCB is becoming an important strategy for electronics miniaturization, device reliability, and manufacturing cost reduction Now days, the dielectric films deposited directly on the polymer substrate are also studied widely. The processing temperature below $200^{\circ}C$ is required for polymer substrates. For a low temperature deposition, bismuth-based pyrochlore materials are known as promising candidate for capacitor $B_2Mg_{2/3}Nb_{4/3}O_7$ ($B_2MN$) multi layers were deposited on Pt/$TiO_2/SiO_2$/Si substrates by radio frequency magnetron sputtering system at room temperature. The physical and structural properties of them are investigated by SEM, AFM, TEM, XPS. The dielectric properties of MIM structured capacitors were evaluated by impedance analyzer (Agilent HP4194A). The leakage current characteristics of MIM structured capacitor were measured by semiconductor parameter analysis (Agilent HP4145B). 200 nm-thick $B_2MN$ muti layer were deposited at room temperature had capacitance density about $1{\mu}F/cm^2$ at 100kHz, dissipation factor of < 1% and dielectric constant of > 100 at 100kHz.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.2
• /
• pp.157-163
• /
• 2002

The aim of this study is to establish an evaluation function that can be used in comparison of alternative layouts by quantification of particularities of arrangements. The machinery arrangement is a design phase that decides the location of various equipment in a compartment to make the most of the function of every components and to meet the limit of ship space at the same time. In case of the ship, Only one of the several alternative layouts is selected. This process depends on the experience, knowledge, and judgement of an expert and, as a result of it, it's hard to get an objective evaluation. Therefore, according to quantification by using the fuzzy theory, we suggest a standard that can objectively evaluate alternative layouts.