• Macromolecular Research
• /
• v.11 no.5
• /
• pp.341-346
• /
• 2003

A poly(ethylene oxide)-b-poly(L-lactide) diblock copolymer (PEO-b-PLLA) is characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and a block length distribution map is constructed. Although the MALDI- TOF mass spectrum of PEO-b-PLLA is very complicated, most of the polymer species were identified by isolating the overlapped isotope patterns and by fitting the overlapped peaks to the Schulz-Zimm distribution function. Reconstructed MALDI-TOF MS spectrum was nearly identical to the measured spectrum and this method shows its potential to be developed as an easy and fast analysis method of low molecular weight block copolymers.

• KIEE International Transactions on Power Engineering
• /
• v.4A no.4
• /
• pp.254-261
• /
• 2004

Traditionally, electrical power systems had formed the vertically integrated industry structures based on the economics of scale. However, power systems have been recently reformed to increase their energy efficiency. According to these trends, the Korean power industry underwent partial reorganization and competition in the generation market was initiated in 2001. In competitive electric markets, accurate load data is one of the most important issues to maintaining flexibility in the electric markets as well as reliability in the power systems. In practice, the measuring load data can be uncertain because of mechanical trouble, communication jamming, and other issues. To obtain reliable load data, an efficient evaluation technique to adjust the missing load data is required. This paper analyzes the load pattern of historical real data and then the tuned ARIMA (Autoregressive Integrated Moving Average), PCHIP (Piecewise Cubic Interpolation) and Branch & Bound method are applied to seek the missing parameters. The proposed method is tested under a variety of conditions and also tested against historical measured data from the Korea Energy Management Corporation (KEMCO).

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.1
• /
• pp.147-153
• /
• 2002

A major problem in the adoption of advanced manufacturing systems such as C.I.M. (Computer Integrated Manufacturing) is the prerequisite economic justification Process because of high investment needed for the acquisition and installation of C.I.M. While some of the benefits expected are readily qualifiable, others are very difficult or even impossible, using conventional method. Thus the investment in C.I.M. should be considered as a strategic decision rather than a tactical decision which concerns with only financial implications. In this Paper we review papers on major justification techniques developed during the last decade and identify the benefits of C.I.M. and describe the considerations in the justification of C.I.M. Also we deal with the current and future research directions in justifying C.I.M.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.195-203
• /
• 2010

This paper concerns about total dynamic analysis of integrated mining system. This system consists of vertical steel pipe, intermediate buffer station, flexible pipe and self-propelled miner. The self-propelled miner and buffer are assumed as rigid-body of 6-dof. Discrete models of vertical steel pipe and flexible pipe are adopted, which are obtained by means of lumped-parameter method. The motion of mining vessel is not considered. Instead, the motion of mining vessel is taken into account in form of various boundary conditions (e.g. forced excitation in slow motion and/or fast oscillation and so on). A terramechanics model of extremely cohesive soft soil is applied to the self-propelled miner. Hinged and ball constraints are used to define the connections between sub-systems (vertical steel pipe, buffer, flexible pipe, self-propelled miner). Equations of motion of the coupled model are derived with respect to the each local coordinates system. Four Euler parameters are used to express the orientations of the sub-systems. To solve the equations of motion of the total dynamic model, an incremental-iterative formulation is employed. Newmark-${\beta}$ method is used for time-domain integration. The total dynamic responses of integrated mining system are investigated.

• International Journal of Computer Science & Network Security
• /
• v.21 no.3
• /
• pp.94-102
• /
• 2021

The study aimed to define all the main determinants of writing a research paper in an integrated manner within the requirements of the science network journals, by introducing scientific research and the steps of writing a research paper, starting from choosing the title to writing the abstract, identifying the research problem, questions, importance and objectives of the study, how to choose previous studies, research methodology and tools, discussion and results In addition to determining the acceptable percentage of plagiarism for science network journals, recommendations, choosing appropriate references and choosing the appropriate references, in addition to determining the acceptable percentage of plagiarism for the journals of the Network of Science, the researcher used the method of analytical investigative research to find out the axes of the study and analyze different reference citation methods to deal with different sources of information (articles-books-theses-conference works-reviews), In addition to studying the most important international programs for measuring plagiarism ratios that are accredited within the journals of the Science Network, and the study concluded that the researcher must present original and innovative results, add an integrated and logical work, take into account all the scientific conditions in the design of the research, its steps and ethics, and take into account the international standards in citing Reference, taking into account the rates of plagiarism within Web of Science journals.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.981-987
• /
• 2016

We present a cost-effective dual polarization quadrature phase-shift coherent receiver module using a silica planar lightwave circuit (PLC) hybrid assembly. Two polarization beam splitters and two $90^{\circ}$ optical hybrids are monolithically integrated in one silica PLC chip with an index contrast of $2%-{\Delta}$. Two four-channel spot-size converter integrated waveguide-photodetector (PD) arrays are bonded on PD carriers for transverse-electric/transverse-magnetic polarization, and butt-coupled to a polished facet of the PLC using a simple chip-to-chip bonding method. Instead of a ceramic sub-mount, a low-cost printed circuit board is applied in the module. A stepped CuW block is used to dissipate the heat generated from trans-impedance amplifiers and to vertically align RF transmission lines. The fabricated coherent receiver shows a 3-dB bandwidth of 26 GHz and a common mode rejection ratio of 16 dB at 22 GHz for a local oscillator optical input. A bit error rate of $8.3{\times}10^{-11}$ is achieved at a 112-Gbps back-to-back transmission with off-line digital signal processing.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.3
• /
• pp.163-174
• /
• 2008

In this paper, for integrating of data on car parts we model information of parts that PDM system manages. Ontology of car parts applies existing ontology mapping research to integrate into car ontology. We propose a method for semantic integration of PLM object of MEMPHIS based on the integrated ontology. Through our method, we introduce C# ontology model to apply existing C# applications with ontology. We also classify ontology integration into three through examples and explain them. While semantically integrating PLM objects based on the integrated ontology, we explain the need for change of PLM object type and describe the process of change for PLM object type by examples.

• Korean Management Science Review
• /
• v.19 no.2
• /
• pp.75-89
• /
• 2002

According to the fast-paced environment of information technology and improving customer services, the design activities of logistics systems improve customer centric services and delivery performance implementing e-logistics system. The fundamental design issues that arise in the delivery system planning are optimizing the system with minimum cost and maximum throughput and service level. This study is concerned with the integrated model development of delivery system with customer responsive service level for DCM, Demand Chain Management. We used a two-step approach for this study. First, we formulated the supply. center facility planning using stochastic set-covering problem and assigned the customers to the supply center using clustering algorithm. Second, we developed vehicle delivery planning for a supply center based on GIS, GIS-VRP. Also we developed a GUI-type computer program for proposed method for supply center problem using GIS and Geo-DataBase of Busan area. The computational results showed that the proposed method was very effective on a set of test problems.

• Korean Management Science Review
• /
• v.12 no.1
• /
• pp.1-17
• /
• 1995

The success of cell manufacturing applications in FMS rests on the effective cell formation to maintain the independent relations both between machine cells and between part families. This paper presents an integrated method for concurrent formation of cells and families with no E.E (Exceptional Element) in FMS with alternative routings. To determine the maximum number of cell and family with no E.E, mathematical conditions and properties are derived. New concept of nonsimilarity is introduced for each machine and part based on machine-operation incidence matrix and part-operation incidence matrix. To concurrently form the cells and families, integer programming based mathematical models are developed. For the predetermined number of cell or family, model I is used to identify whether E.E exists or not. Model II forms cells and families considering only nonsimilarity. But model III can consider nonsimilarity and processing times. The proposed method is tested and proved by using numerical examples.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1073-1076
• /
• 2010

Shallow foundations of various columns such as traffic signs, CCTVs, traffic lights, street lights, steel telephone poles and so on are made by cast-in-situ concrete method. However, typical cast-in-situ method has many problems because of the long duration of construction, occupation of sidewalks and low strength of the concrete after curing. In order to solve the problems, field load tests for the prefabricated DSF foundation made by combination of column and foundation was conducted to know load-deformation behavior by torsional tests.