• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.761-765
• /
• 2023

We analyzed the absorption spectra of acetone in the 3.37 ㎛ mid-infrared range using the off-axis integrated cavity output spectroscopy technique to develop a real-time, in-line breath analysis device. The linear relationship between acetone concentration and absorption increase was confirmed as 0.32%/ppm, indicating that the developed device allows for a quantitative analysis of acetone concentration in exhaled breath. To further confirm the feasibility of using our device for breath analysis, we measured the acetone concentration of human breath samples at the sub-ppm level.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.163-165
• /
• 2000

We investigated visible light radiated from Plasma Focus device by time-integrated analyzed method. Plasma focus is a device that translated from electric energy into visible light by electric discharge. Spectral analysis is using Monochromator(focal length = 0.5 m). Time-integrated spectrum is analyzed with densitometer the film which developed a constant range of wavelength. The condition of visible emission was that the discharging voltage was 13 kV and the working gas were Argon and Helium.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.214-220
• /
• 2017

A wavelength filter based on a polymer Bragg reflector has received much attention due to its simple structure and wide tuning range. Tilted Bragg gratings and asymmetric Y-branches are integrated to extract the reflected optical signals in different directions. To optimize device performance, design procedures are thoroughly considered and various design parameters are applied to fabricated devices. An asymmetric Y-branch with an angle of $0.3^{\circ}$ produced crosstalk less than -25 dB, and the even-odd mode coupling was optimized for a grating tilt angle of $2.5^{\circ}$, which closely followed the design results. Through this experiment, it was confirmed that this device has a large manufacturing tolerance, which is important for mass production of this optical device.

• Investigative Magnetic Resonance Imaging
• /
• v.25 no.4
• /
• pp.218-228
• /
• 2021

Due to their high degree of freedom to transfer and acquire light, fiber optics can be used in the presence of strong magnetic fields. Hence, optical sensing and imaging based on fiber optics can be integrated with magnetic resonance imaging (MRI) diagnostic systems to acquire valuable information on biological tissues and organs based on a magnetic field. In this article, we explored the combination of MRI and optical sensing/imaging techniques by classifying them into the following topics: 1) functional near-infrared spectroscopy with functional MRI for brain studies and brain disease diagnoses, 2) integration of fiber-optic molecular imaging and optogenetic stimulation with MRI, and 3) optical therapeutic applications with an MRI guidance system. Through these investigations, we believe that a combination of MRI and optical sensing/imaging techniques can be employed as both research methods for multidisciplinary studies and clinical diagnostic/therapeutic devices.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.27-31
• /
• 1998

We investigated visible light radiated from Plasma focus device by time-resolved analyzed method and time-integrated analyzed method. Plasma focus consisted of two coaxial electrodes is a device that translated from electric energy of maximum 40 kV/20 kJ in capacitor banks into visible light by electric discharge. Spectral analysis is using Monochromator(f =0.5m). Time-resolved spectrum is analyzed with a oscilloscope the light pulse of constant wavelength and time-integrated spectrum does with densitometer the film which developed a constant range of wavelength. The optimum condition of visible emission was that the discharging voltage was 17kV and the gas pressure 0.5 torr Ar.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.10-14
• /
• 2022

Low-threshold optical bistability is essential for practical nonlinear optical applications. Many bistable optical devices based on high-quality-factor resonators have been proposed to reduce the threshold intensity. However, demonstrating high-quality-factor resonance requires complex fabrication techniques. In this work, we numerically demonstrate optical bistability with bound states in the continuum in a simple one-dimensional Si photonic crystal. The designed structure supports bound states in the continuum, producing an ultrahigh quality factor without tough fabrication conditions. The threshold intensity of the designed device is 150 MW/cm² at the optical communication wavelength. This scheme may lead to a new class of nonlinear photonics.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.50-55
• /
• 2007

Using the Selective Area Growth (SAG) technology of Metal Organic Chemical Vapor Deposition (MOCVD), we successfully integrated an active device and passive devices on the same substrate. In other words, we integrated a Semiconductor Optical Amplifier (SOA) as an active device and an S-bend waveguide and a Multi Mode Interference (MMI) waveguide as passive devices. The SOA is successfully integrated with passive devices on the same substrate. The Cross-Gain Modulation (XGM) characteristic of the integrated SOA and the loss of an MMI and an S-bend waveguide were measured. Measured XGM characteristics of the SOA showed an extinction ratio of 8.82 dB. The total loss of the MMI and S-bend waveguide was 18 dB.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.187-192
• /
• 2008

The design and analysis of a novel photonic crystal electro-optic modulator are presented in this paper. The device incorporates an electro-optic (EO) polymer slot waveguide into the center of a silicon photonic crystal waveguide. In this device, strong optical confinement in the EO polymer core and small group velocity from the photonic crystal structure provide a surprise enhancement of the EO effect.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.166-175
• /
• 2023

We theoretically analyze and experimentally demonstrate a polarization-diversified four-channel optical demultiplexer (DeMUX) comprising a hybrid mode conversion-type polarization splitter rotator (PSR) and delayed Mach-Zehnder interferometer optical DeMUX for use in coarse wavelength division multiplexing (CWDM)-based optical interconnect applications. The Si wire-based device fabricated by a complementary metal-oxide semiconductor-compatible process exhibited nearly the same filter spectral response irrespective of the input polarization state under the PSR. The device had an extremely low insertion loss of <1.0 dB, polarization-dependent loss of <1.0 dB, and interchannel imbalance of <0.5 dB, suppressing unwanted wavelength and polarization crosstalk from neighboring channels of <-20 dB at each peak transmission channel grid.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.143-149
• /
• 2017

LED arrays with pixel numbers of $3{\times}3$, $4{\times}4$, and $5{\times}5$ have been studied in this paper in order to enhance the optical output power and decrease heat dissipation of an AlGaInP-based light emitting diode display device (pixel size of $280{\times}280{\mu}m$) fabricated by micro-opto-electro-mechanical systems. Simulation results showed that the thermal resistances of the $3{\times}3$, $4{\times}4$, $5{\times}5$ arrays were $52^{\circ}C/W$, $69.7^{\circ}C/W$, and $84.3^{\circ}C/W$. The junction temperature was calculated by the peak wavelength shift method, which showed that the maximum value appears at the center pixel due to thermal crosstalk from neighboring pixels. The central temperature would be minimized with $40{\mu}m$ pixel pitch and $150{\mu}m$ substrate thickness as calculated by thermal modeling using finite element analysis. The modeling can be used to optimize parameters of highly integrated AlGaInP-based LED arrays fabricated by micro-opto-electro-mechanical systems technology.