• 한국시뮬레이션학회논문지
• /
• 제22권4호
• /
• pp.93-98
• /
• 2013

본 논문에서는, 초고집적과 초고내압 MOSFET를 위한 높은 임계전압에서 제안한 구조의 얕은 트랜치 접합 격리 구조에 대한 시뮬레이션 하였다. 열전자 스트레스와 열 손상의 유전 강화 전계의 물리적 기본 모델들은 주위 온도와 스트레스 바이어스의 넓은 범위에 걸친 집적화된 소자들에 있어서 분석하는 전기적의 목표인 TCAD 툴을 이용하였다. 시뮬레이션 결과, 얕은 트랜치 접합 격리 구조가 수동적인 전기적 기능 일지라도, 소자의 크기가 감소됨에 따라서, 초대규모 집적회로 공정의 응용에서 제안된 얕은 트랜치 격리 구조가 전기적 특성에서 전위차, 전계와 포화 임계 전압이 높게 나타났다.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.123-128
• /
• 2010

We have investigated the properties of the novel triangular ring resonator with the total internal reflection mirrors and the semiconductor optical amplifier for photonic integrated circuits (PIC). A novel triangular resonators containing active and passive sections are fabricated and characterized with various multimode interference (MMI) lengths. The optimum MMI length and width turn out to be 108 and 9 ${\mu}m$, respectively. A free spectral range of approximately 228 GHz is observed near 1558 nm along with an on-off ratio of 9 dB. The proposed triangular resonator has a good advantage to remove the direct coupling between the two access waveguides of the MMI coupler. Hence, such resonators can be directly integrated with other devices making compact and highly functional PIC possible.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1137-1140
• /
• 2002

A V-band low-noise amplifiers (LNA) based on the Millimeter-wave monolithic integrated circuit (MIMIC) technology were fabricated using high performance 0.1 $\mu\textrm{m}$ $\Gamma$-shaped pseudomorphic high electron mobility transistors (PHEMT＇s), coplanar waveguide (CPW) structures and the integrated process for passive and active devices. The low-noise designs resulted in a two-stage MIMIC LNA with a high S$\sub$21/ gain of 14.9 dB and a good matching at 60 ㎓. 20 dBm of IP3 and 3.9 dB of minimum noise figure were also obtained from the LNA. The 2-stage LNA was designed in a chip size of 2.3 ${\times}$1.4 mm$^2$by using 70 $\mu\textrm{m}$ ${\times}$2 PHEMT’s. These results demonstrate that a good low-noise performance and simultaneously with a high gain performance is achievable with GaAs PHEMT's in the 60 ㎓ band.

• 한국멀티미디어학회논문지
• /
• 제24권8호
• /
• pp.1035-1043
• /
• 2021

The shoulder is less stable than other joints, making it easier to onset of various shoulder disorders. In addition, limited range of motion and pain in the shoulder due to shoulder disorders restricts daily life and social activities. The problem with exercise therapy can be reduced in exercise effect by causing boredom through simple repetition of motion, thus reducing the patient's willingness to participate. Therefore, this paper aims to provide a treatment method that can induce active participation of patients by developing devices capable of passive, active, and resistance exercise and serious game contents using them. Furthermore, sEMG was used to verify whether the rotational exercise in the horizontal and vertical using serious game contents helps the shoulder movement actually. The measured sEMG signal was classified as 5 phases according to the angle of rotation and calculated the mean integrated EMG. The mean integrated EMG for the experimental results was higher in all phases when rotational was performed compared to those when both horizontal and vertical rotational exercise remained initial posture, indicating an increase in muscle activity.

• 한국지진공학회논문집
• /
• 제6권5호
• /
• pp.37-43
• /
• 2002

복합구조제어시스템의 동시최적설계방법에 관하여 연구하였다. 여기에서는 수동제어장치 뿐만 아니라 능동제어장치의 배치와 용량, 제어기 등이 설계변수가 되며 설계인자들의 만족도를 나타내는 선호도함수를 정의하여 이를 이용하여 최적화문제를 정식화한다. 또한 수동 및 능동제어장치의 설계변수로부터 동시에 최적해를 찾아내기 의한 수치적 방법으로 유전자알고리즘을 사용하였다. 지진하중을 받는 다자유도 구조물의 설계에 및 수치모사를 통하여 제안한 방법의 타당성을 검증하고자 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.912-915
• /
• 2004

Inductors material utilized in the downsizing passive devices and Rf components requires the physical and electrical properties at given area such as inductors thickness reduction, inductance and q-factor increase, low leakage current and thermal stability. In this study, Spiral inductors on the $SiO_2/Si$(100) substrate were fabricated by the magnetron sputtering method. Cu thin film with the thickness of $2{\mu}m$ was deposited on the substrate. Also we fabricated square inductors through the wet chemical etching technique. The inductors are completely specified by the turn width and the spacing between spirals. Both the width and spacing between spirals were varied from 10 to $60{\mu}m$ and from 20 to $70{\mu}m$, respectively. Inductance and Q factor dependent on the RF frequency were investigated to analyze performance of inductor arrays

• 한국재료학회지
• /
• 제11권5호
• /
• pp.385-392
• /
• 2001

집적형 광증폭기는 대량생산이 용이하고. 단일 칩에 다기능의 광소자를 집적할 수 있다는 장점 때문에 활히 연구되어져 왔다. 본 연구에서는 수동형 집적광소자의 제작에 사용되는 화염가수분해증착법 (FHD)을 이용하여 실리콘 (Si) /실리카 ($SiO_2$) 광도파막을 제작하고, 이 박막에 Solution Doping 법을 이용하여 $Er^{3+}$ 를 첨가하여 광증폭 매질을 제작하는 연구를 수행하였다.

• 한국전자파학회지:전자파기술
• /
• 제11권2호
• /
• pp.21-34
• /
• 2000

밀리미터파는 새로운 민간 통신 서비스에 있어 무한한 주파수 자원의 보고로 볼 수 있다. 과거 이의 활용은 빈약한 부품기술로 인해 군무기체계 이외에는 도외시되었으나, '80년대 이후 GaAs pHEMT device 개발과 공정기술의 비약적인 발전으로 이를 민간 서 비스에 활용하는 것이 가능하게 되었다. 특히 GaAs p pHEMT 공정기술은 회로 설계시 필요한 대다수의 수동부품을 동시에 집적할 수 있어 hybrid 설계시 발생하는 조립의 문제점을 대다수 해결하고 있다. 이보다 늦게 시작된 InP를 기반으로한 pHEMT의 경우 GaAs의 앞서 언급한 속성을 그대로 지니며 더 높은 주파수에 적용 가능하여 밀리미터파 활용 전망 을 더욱 밝게 하고 있다. 본 논문에서는 이들의 개발 현황 및 이들을 이용한 집적회로의 현황을 살펴보고 향후 발전 방향을 예측하고자 한다.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.373-379
• /
• 2019

Nowadays, the IoT portable electronic devices have become more useful and diverse, so they require various supply voltage levels to operate. This paper presents a DC-DC buck converter with pulse width modulation (PWM) for portable electronic devices. The proposed step-down DC-DC converter consists of passive elements such as capacitors, inductors, and resistors and an integrated chip (IC) for signal control to reduce power consumption and improves ripple voltage with the resolution. The proposed DC-DC converter is simulated and analyzed in PSPICE circuit design platform, and implemented on the prototype PCB board with a Texas Instruments LM5165 IC. The proposed buck converter is showed 92.6% of peak efficiency including a load current range of 4-10 mA, 3.29 mV of the voltage ripple at 5 V output voltage for the supply voltage 12 V. Measured and Simulated power efficiency are made good agreement with each other.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.181-184
• /
• 2001

A coplanar waveguide(CPW) on a dielectric substrate consists of a center strip conductor with semi-infinite ground planes on either side. This type of waveguide offers several advantages over microstrip line. It facilitates easy shunt as well as series mounting of active and passive devices. It eliminates the need for wraparound and via holes, and it has a low radiation loss. These, as well as several other advantages, make CPW ideally suited for microwave integrated circuit applications. However, very little information is available in the literature on models for CPW discontinuities. This lack of sufficient discontinuity models for CPW has limited the application of CPW in microwave circuit design. We presented for the characteristics of coplanar waveguide open end capacitance and series gap capacitance. Measurements by utilizing the resonance method were made and the experimental data confirmed the validity of theories. The relationships between the CPW capacitances and the physical dimensions were studied.