• 한국전자통신학회논문지
• /
• 제5권6호
• /
• pp.602-612
• /
• 2010

본 논문에서는 설비관리의 효율성 및 사용자의 접근성을 위해 웹 기반 통합설비 관리 시스템 응용 환경에서 통합 모델링 언어(UML) 기반의 객체 지향 모델링을 제안한다. 이를 위해 먼저 통합설비 관리 시스템 관련 기술과 요구사항을 수집하고 수집된 요구사항을 통하여 시스템 재개발 시 개발자간의 의사소통이 원활하게 이루어질 수 있고 시스템의 위험도를 줄이기 위해 업무 흐름도 및 중요한 다양한 설계 요소(클래스, 컴포넌트, 패키지, 유스케이스 등)를 고려하여 시스템을 설계한다. 그리고 통합설비 관리 시스템의 설비 마스터 코드, 점검관리, 수리관리, 고장관리의 데이터베이스를 구축한다. 마지막으로 멀티 플랫폼 기반의 그래픽 사용자 인터페이스를 고려한 웹 기반 통합설비 관리 시스템의 세 가지 주요 모듈인 설비 점검 모듈, 수리 관리 모듈, 고장 관리 모듈을 설계하고 아울러 JSP를 이용한 웹기반 GUI를 구현한다.

• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.339-352
• /
• 2019

Rockmass parameters are used in the design of engineering structures built in rock and soil. One of the most important of these parameters is the rockmass Emass (Emass). Determination of the Emass of rockmass is a long, hard and expensive job. Therefore, empirical formulas developed by different researchers are used. These formulas use the elastic modulus of the material as a parameter. This value is a constant value in the design. However, engineering structures remain under different loads depending on many factors, such as topography, geometry of the structure, rock / soil properties. Time is other important parameter for rock/soil structure. With the start of the excavation, the loads that the structure is exposed to will change and remain constant at one level. In the new proposed method, the use of different Emass calculated from empirical formulas using the different material elastic modulus, which has different values under different loads as time dependent, was investigated in rock/soil structures during design. The performance of the stability analysis using different deformation modules was questioned by numerical modeling method. For this query, a sub-routine which can be integrated into the numerical modeling software has been developed. The integrated sub-routine contains the formula for the Emass, which is calculated from the material elasticity modules under time dependent and different constant loads in the laboratory. As a result of investigations conducted in 12 different field studies, the new proposed method is very sensitive.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.354-357
• /
• 1996

Virtual Manufacturing System(VMS) is an integrated computer based model which has physical, logical schema and behavior of real manufacturing system. In this paper, an integrated scheduling system is developed to simulate and control a Virtual Factory. A workflow model is constructed to define and analyze the structure of a VMS. On-line dynamic dispatching system is developed using MultiPass algorithm and scheduling system considering dynamic CAPP is carried out. Integrated scheduling system developed in this paper reduces the discrepancies between virtual model and real manufacturing system, and control of real shop floor is possible.

• 산업공학
• /
• 제13권3호
• /
• pp.320-327
• /
• 2000

In this research report, we consider multi stage supply chain optimization modeling techniques, and propose a new integrated model. The stages that are normally associated with a supply chain include procurement, production and distribution. In general, there are two distinct set of approaches which manage whole supply chain. One approach is the plant decision and subsequently distribution and inventory decision while the second approach is to address all decisions simultaneously through the integrated model. First, we present a survey of existing models that are treated by independently. And then, we propose an integrated model that is in a moderate size and easy to implement in practice. Finally, we address possible solution methodologies and present some computational test results using CPLEX to see the computational burden from which new algorithmic insight might be come up.

• International Journal of Contents
• /
• 제12권1호
• /
• pp.6-13
• /
• 2016

Since the importance of eco-friendly architecture is rapidly increasing, BIM receives significant attention as an alternative that would derive the practical results and apply the design values of eco-friendly design elements to the architectural design process. Therefore, this study establishes an Integrated Design System based on Green BIM by applying the eco-friendly design values logically and systemically. The study also proposes practical case studies to examine the possibility of application. As a result, the framework of Green based Integrated Design System(gbIDS) and a prototype of Web-based gbIDS were developed to improve the working environment of small architectural firms.

• 전력전자학회논문지
• /
• 제20권1호
• /
• pp.45-50
• /
• 2015

The simulation model of All-Electric-Ship consists of electrical and mechanical systems. Running the total simulation requires considerable time and causes a lack of computer memory, because the two systems have different dynamic characteristics. Therefore, integrated simulation is practically impossible. This paper proposes the simplified model of electrical system to reduce simulation time significantly, compared to the detailed model. The validity of the proposed simplified model is verified by comparing detailed and simplified simulation results. Thus, the simplified models are applied to the integrated system. As a result, total system simulation can be implemented.

• 한국BIM학회 논문집
• /
• 제4권2호
• /
• pp.1-9
• /
• 2014

As interest in green building has increased, construction market has evolved through BIM-based architecture also, BIM-based technologies have been developed simultaneously. Due to this aspect, the need of environmental analysis software utilizing BIM data became essential. This study shows that BIM-based integrated module provides objective analysis to proceed quick decision-making for a proposal. In addition to that, this integrated module creates a model through BIM data to analyze and report residential environment and energy consumption such as, daylight, view, ventilation and privacy in order to practically apply the BIM technology from the schematic design.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.931-936
• /
• 2008

The need for urban-scale energy simulation is increasing as the world is aware of urgency to decrease $CO_2$ emission. As a bridge of building energy simulation and that of urban, this paper presents a case study to examine the effect of changing resolution of a model in case of complex apartment unit. Also it suggests a modeling strategy to correct differences caused by simplification of the model and evaluate the extent of its use.

• 산업공학
• /
• 제20권4호
• /
• pp.438-447
• /
• 2007

This paper presents an aspect-oriented approach to simulation design and analysis in system design phase for integrated logistics system simulation. The integrated logistics system composed of AS/RS (Automated Storages and Retrieval System), AGVs (Automated Guided Vehicle System), STVs (Sorting Transfer Vehicle System) and Conveyor System is designed by using the aspect-oriented approach and UML (Unified Modeling Language). The multi-factorial design of experiments and regression analysis are used for design parameters of the system and Evolution Strategies is used to verify each parameter. Aspect-oriented approach for the integrated logistics system simulation shows the advantages of code reusability, extendible, modulation, easy improvement and a better design technique.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1119-1122
• /
• 2000

This paper describes on RF circuit simulation technique, especially on a RF modeling and a model extraction of a LDMOS(Lateral Diffused MOS) that has gate-width (Wg) dependence. Small-signal model parameters of the LDMOSs with various gate-widths extracted from S-parameter data are applied to make the relation between the RF performances and gate-width. It is proved that a source inductance (Ls) was not applicable to scaling rules. These extracted small-signal model parameters are also utilized to remove extrinsic elements in an extraction of a large-signal model (using HP Root MOSFET Model). Therefore, we can omit an additional measurement to extract extrinsic elements. When the large-signal model with Ls having the above gate-width dependence is applied to a high-power LDMOS module, the simulated performances (Output power, etc.) are in a good agreement with experimental results. It is proved that our extracted model and RF circuit simulation have a good accuracy.