• Korean Journal of Computational Design and Engineering
• /
• v.20 no.3
• /
• pp.221-229
• /
• 2015

M&S (Modeling & Simulation) based design is widely accepted for the development of the future weapon system with better performance in a cheaper and faster way. Integrated simulation environment (ISE) is needed for the M&S based design. On the ISE, system engineers can not only verify design options but also validate system requirements. In this paper, we propose architectural models of the integrated simulation environment (ISE) which incorporates mission effectiveness M&S (Modeling & Simulation), system performance M&S, the optimization model of integrated performances, digital mockup and virtual prototype. The ISE architectural models may be used to implement the ISE for the development of the future unmanned ground combat vehicle.

• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.131-138
• /
• 2020

The SBA Integrated Information system is constructed and operated for scientific and systematic management of Defense information utilizing whole process of weapon system acquisition from requirement institution to operation maintenance. In order to utilize m&s resources actively and effectively in the life cycle of weapon system acquisition, efficient management plans of the SBA integrated Information system is required. As a result of identifying usage on SBA Information system and performance of operation performance measurement, it was defined that establishment of the SBA Integrated Information system process and provision of detailed system are mandatory for activating m&s resource and supporting process of acquisitions. In this study, Defense m&s information system is analyzed and improvement plans of SBA Integrated Information system is provided for efficient operation of SBA integrated Information system.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.2
• /
• pp.73-90
• /
• 2018

Various navigation systems are integrated with the Global Navigation Satellite System (GNSS) to improve navigation performance so that continuous navigation information can be obtained even when navigation performance is degraded or navigation is not available due to the outage of GNSS. Time and cost can be reduced by evaluating performance of the integrated navigation system through Modeling and Simulation (M&S) software prior to the deployment of the integrated navigation system. The measurements of the navigation system should be generated to evaluate performance through of the navigation system M&S software. This paper proposes a method of designing a navigation environment generation module in M&S software of the integrated navigation system. To show applicability of the proposed method to M&S software design of the integrated navigation system, functions are verified through MATLAB. And then visual C++ based M&S software for the integrated navigation system is implemented to check the operation of the navigation environment generation module. The reference trajectory is generated and true measurements of Global Positioning System (GPS), Korea Positioning System (KPS), and enhanced Long range navigation (eLoran) are generated from the reference trajectory. The navigation results obtained from the true measurements are compared with the reference trajectories. The results show that the measurements generated using the design generation module by the proposed method are valid and the navigation environment generation module can be applied to M&S software of the integrated navigation system.

• Journal of the Korea Society for Simulation
• /
• v.26 no.1
• /
• pp.13-19
• /
• 2017

6-DOF flight simulation program is most generally used M&S tool in domestic missile development procedure. The 6-DOF M&S method, however, cannot validate the performance of a imaging seeker-adopted missile in various conditions. A M&S tool for the analysis of the integrated-flight simulation is required since the tracking performance of the imaging seeker is highly dependent on the missile maneuvering, which introduces the displacement and rotation of the target in the seeker imagery. Through the development of the $3^{rd}$ generation anti-tank missile, Raybolt, the integrated-flight M&S tool was developed and applied to the missile configuration design. It integrates synthetic image generation S/W, imaging tracker, and flight simulation program and computes the main system performance criteria, hit probability by Monte-Carlo Simulation. In this paper, the issues in the $3^{rd}$ generation anti-tank missile configuration and the integrated-flight M&S method and results are described.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.149-158
• /
• 2019

This paper introduces an integrated Modeling & Simulation framework for the efficient development of the rescue robot which rescues a wounded patients or soldiers and disposes a dangerous objects or explosive materials in the battlefields and disastrous environments. An integrated M&S(Modeling & Simulation) framework would have enabled us to perform the dynamic simulation program GAZEBO based Software-in-the-Loop Simulation(SILS) which is to replacing the robot platform hardware with a simulation software. An integrated M&S framework would help us to perform designing robot and performance validation of robot control results more efficiently. Furthermore, Tele-operation performance in the unstructured environments could be improved. We review a case study of applying an integrated M&S framework tool in validating performance of mobility stabilization control, one of the most important control strategy in the rescue robot.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.8 no.2
• /
• pp.21-28
• /
• 2008

The main purpose of this paper is to find the phase-in of BIM adoption by focusing on the level of integration. BlM should be aimed at integration and collaboration of all parties furnishing design and construction services to increase the productivity. Therefore, the degree and depth of integration for project collaboration is very important to BlM design process. One of the key advantages of full integration is that is to facilitates the development of detailed information much earlier in the entire design process to improve collaboration among stakeholders. Such integrated use is the ultimate method, but even so, it's not the precondition of BlM. One of the key advantages of relatively low integration as a transition phase is to adopt the BlM earlier than full integration. Such transitional and non-integrated BIM can also reduce the possibility of trial and error in BlM adoption. Therefore, this paper focused on non-integrated use of BlM as a substitute of full IPD by analyzing obstacles in BIM adoption.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.261-270
• /
• 2010

An integrated simulation engine provides tools, services, and standards to support various activities in the entire M&S from modeling and simulation to analysis of the simulation results. Many countries have developed integrated simulation engines to efficiently assist complex M&S activities. However, we do not have domestic simulation engines especially designed for defense M&S, therefore, developing M&S softwares still remains as a hard task with high cost and tine. OpenSIM(Open Simulation engine for Interoperable Models) is an integrated simulation engine and provides tools, services and standard interfaces for weapons analysis. OpenSIM's services are comprised of classes, member functions and data attributes which are commonly used in modeling, simulating and analyzing weapons systems. In this paper, we introduce OpenSIM's services in C++ APIs and illustrate them through an ASM example(Air to Surface Missile).

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.308-312
• /
• 2003

In this paper, we propose the M-QDMR algorithm for improvement QoS in the wire/wireless integrated environment. Through simulations and comparing to another multicast algorithm, we reach a conclusion is that M-QDMR can simply and dynamically adjusts the construction of multicast tree with little delay and the most reducible bandwidth resources.

• Journal of Pharmacopuncture
• /
• v.21 no.2
• /
• pp.126-131
• /
• 2018

This study investigates the effect of a combination of homeopathic medicine and electro- acupuncture in two patients with breast cancer and severe liver disease who could not receive standard anaesthesia therapy due to liver problems. Specifically, measurable and quantifiable parameters were used to evaluate whether an integrated approach-consisting of electro- acupuncture and a homeopathic medicine diluted above Avogadro's limit (that is, above a potency of 12CH) during the pre-surgical, surgical and post-surgical phases -can improve general well-being of a patient undergoing breast cancer surgery. In breast cancer surgery, we employed an integrated approach consisting of induction with hypnotics and muscle relaxants, followed by maintenance with anaesthetic gas, combined with a homeopathic treatment (Arnica montana 15CH and Apis mellifica 15CH) before and after surgery and an electro- acupuncture treatment performed in the pre- and post-surgical phases without any analgesic/pain relieving medications. Both of the patients treated with the integrated approach improved their overall condition without need for other common pain relieving medicines. Additionally, thanks to their rapid awakening, the patients were not relocated to a protected area and the hospitalization was shorter. A multidisciplinary approach incorporating homeopathic medicine and electro-acupuncture can be a solution for patients who need or ask about a different and/or safer alternative to the standard treatment. This approach can offer a safe, much less expensive, non-invasive and viable alternative for such cases. Moreover it can be useful for an opioids free anesthesia.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.1
• /
• pp.47-55
• /
• 2005

This work describes an 8b 240 MS/s CMOS ADC as one of embedded core cells for high-performance displays requiring low power and small size at high speed. The proposed ADC uses externally connected pins only for analog inputs, digital outputs, and supplies. The ADC employs (1) a two-step pipelined architecture to optimize power and chip size at the target sampling frequency of 240 MHz, (2) advanced bootstrapping techniques to achieve high signal bandwidth in the input SHA, and (3) RC filter-based on-chip I/V references to improve noise performance with a power-off function added for portable applications. The prototype ADC is implemented in a 0.18 um CMOS and simultaneously integrated in a DVD system with dual-mode inputs. The measured DNL and INL are within 0.49 LSB and 0.69 LSB, respectively. The prototype ADC shows the SFDR of 53 dB for a 10 MHz input sinewave at 240 MS/s while maintaining the SNDR exceeding 38 dB and the SFDR exceeding 50 dB for input frequencies up to the Nyquist frequency at 240 MS/s. The ADC consumes, 104 mW at 240 MS/s and the active die area is 1.36 ㎟.