• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.275-277
• /
• 1999

A application possibility of photoresist flexible film for optical waveguide is proposed and described. The optical waveguide dimensions that is consists of Mach-zehnder interferometric and single channel waveguide based on the single-mode conditions in LiNbO$_3$ device was utilized and fabricated by wet etching technique. This Polymer material for core layer is SU-8/5O(Microchem.) and its refractive index from prism couping method was measured about 1.59 thickness about 10${\mu}{\textrm}{m}$ at wavelength 0.6328${\mu}{\textrm}{m}$. From the results, this work can show the possibility of fabricating a flexible optical waveguide in the field of integrated optics.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.4 no.1
• /
• pp.53-63
• /
• 2009

Objectives : The purpose of this study was to investigate the relation between neck pain and physical factors in female office workers. Methods : Neck pain group of 31 female subjects complained of neck and arm discomfort. Normal group of 20 female subjects had no complaints or minimal discomfort. Cervical curvature and muscle tone were assessed by whole spine x-ray, meridian-electromyography(MEMG), craniovertebral angle. Neck pain was evaluated by Neck Disability Index(NDI) and Visual Analog Scale(VAS). Results : The NDI score and contraction power of upper trapezius by MEMG had a relationship significantly. However, there was no relationship between NDI and cervical curvature. Conclusions : The results suggest that neck pain is related to muscle tone rather than physical stress and cervical curvature.

• Geomechanics and Engineering
• /
• v.1 no.1
• /
• pp.17-34
• /
• 2009

There has been growing agreement that geotechnical reliability-based design (RBD) is necessary for establishing more advanced and integrated design system. In this study, resistance factors for LRFD pile design using CPT results were investigated for axially loaded driven piles. In order to address variability in design methodology, different CPT-based methods and load-settlement criteria, popular in practice, were selected and used for evaluation of resistance factors. A total of 32 data sets from 13 test sites were collected from the literature. In order to maintain the statistical consistency of the data sets, the characteristic pile load capacity was introduced in reliability analysis and evaluation of resistance factors. It was found that values of resistance factors considerably differ for different design methods, load-settlement criteria, and load capacity components. For the total resistance, resistance factors for LCPC method were higher than others, while those for Aoki-Velloso's and Philipponnat's methods were in similar ranges. In respect to load-settlement criteria, 0.1B and Chin's criteria produced higher resistance factors than DeBeer's and Davisson's criteria. Resistance factors for the base and shaft resistances were also presented and analyzed.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.251-258
• /
• 2011

The existing evaluation systems based on financial performance summarize the information about past results and focus on short-term performance, and so they have the limits to explain the future value of firms and to make a long-term strategic performance. By this reason, as a way to increase the future value, the development of the integrated performance evaluation system with which we may manages financial performance and knowledge assets together has been required recently. This study puts together various researches for the evaluation of knowledge assets, and analyzes the existing studies for the domestic medical devices industry and the tendency of introduction for business practice. Under this analysis, this study develops the knowledge asset evaluation indexes for medical devices industry by using the Balanced Score Card (BSC) of Kaplan & Norton(1992), and then presents the evaluation model by applying the Analytic Hierarchy Process (AHP) of Saaty(1980) to get the weight for each index. With the final evaluation model, we can calculate the evaluation score combined with both the quantitative indexes and the qualitative indexes at once.

• Korean Journal of Optics and Photonics
• /
• v.22 no.6
• /
• pp.256-261
• /
• 2011

In this paper, a variable optical signal delay line based on coupled ring resonators is designed and fabricated in high-index contrast polymer material. The free spectral ranges (FSR) of the rings are designed to be 100 GHz, and 8 coupled rings are used. When two rings near a bus waveguide are in resonance, the optical delay is measured to be about 100 ps. When four rings are in resonance, the measured delay is about 180 ps. Both are close to the theoretical calculations.

• Industrial Engineering and Management Systems
• /
• v.11 no.1
• /
• pp.54-69
• /
• 2012

Chan and Qi (SCM 8/3 (2003) 209) developed an innovative measurement method that aggregates performance measures in a supply chain into an overall performance index. The method is useful and makes a significant contribution to supply chain management. Nevertheless, it can be cumbersome in computation due to its highly complex algorithmic fuzzy model. In aggregating the performance information, weights used by Chan and Qi-which aim to address the imprecision of human judgments-are incompatible with weights in additive models. Furthermore, the default assumption of linearity of its scoring procedure could lead to an inaccurate assessment of the overall performance. This paper addresses these limitations by developing an alternative measurement that takes care of the above. This research integrates three different approaches to multiple criteria decision analysis (MCDA)-the multiattribute value theory (MAVT), the swing weighting method and the eigenvector procedure-to develop a comprehensive assessment of supply chain performance. One case study is presented to demonstrate the measurement of the proposed method. The performance model used in the case study relies on the Supply Chain Operations Reference (SCOR) model level 1. With this measurement method, supply chain managers can easily benchmark the performance of the whole system, and then analyze the effectiveness and efficiency of the supply chain.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.689-700
• /
• 2002

In this paper, we developed Korean Morphological Analyzer for an automatic indexing that is essential for Information Retrieval. Since it is important to index large-scaled document set efficiently, we concentrated on maximizing the speed of word analysis, modularization and structuralization of the system without new concepts or ideas. In this respect, our system is characterized in terms of software engineering aspect to be used in real world rather than theoretical issues. First, a dictionary of words was structured. Then modules that analyze substantive words and inflected words were introduced. Furthermore numeral analyzer was developed. And we introduced an unknown word analyzer using the patterns of morpheme. This whole system was integrated into K-2000, an information retrieval system.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.869-877
• /
• 2016

Necessity has compelled man to improve upon the art of tapping wind energy for power generation; an apt reliever of strain exerted on the non-renewable fossil fuel. The power generation in a Wind Farm (WF) depends on site and wind velocity which varies with time and season which in turn determine wind power modeling. It implies, the development of an accurate wind speed model to predict wind power fluctuations at a particular site is significant. In this paper, Box-Jenkins ARIMA (Auto Regressive Integrated Moving Average) time series model for wind speed is developed for a 99MW wind farm in the southern region of India. Because of the uncertainty in wind power developed, the economic viability and reliability of power generation is significant. Life Cycle Costing (LCC) method is used to determine the economic viability of WF generated power. Reliability models of WF are developed with the help of load curve of the utility grid and Capacity Outage Probability Table (COPT). ARIMA wind speed model is used for developing COPT. The values of annual reliability indices and variations of risk index of the WF with system peak load are calculated. Such reliability models of large WF can be used in generation system planning.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.121-126
• /
• 2013

PURPOSES: Road Design Consistency Evaluation can guarantee road alignments with safety factors, however it can be hard work to deal with general car accident factors in only this evaluation index. Ideal Road Design Consistency Evaluation is show the mutual balance of road alignment and human factors with a variety of factors for road safety. METHODS: This study carried out overall road safety evaluations which are methods of running speeding consistency and car platoon safety analysis (driver's behaviors factors) as well. RESULTS: Out of 13 sections in a experimental road layout, safety factors of 8 sections showed 'Good' or 'Fair' status. However, 'Poor' results were found out in 5 sections. Particularly, it showed the different outcomes among the 4 evaluation methods used in this study. CONCLUSIONS: Road safety countermeasures were proposed for the potentially dangerous sections in road which failed to identify in the other methods. This study will contribute toward future study of more reliable Road Design Consistency Evaluation in the future for road safety.

• Journal of Korean Society of Rural Planning
• /
• v.15 no.1
• /
• pp.47-59
• /
• 2009

The aim of this study is to analyze the green-tourism centrality considering spatial interaction using Gravity Model and social network method. The degree centrality and prestige centrality were applied as green-tourism centrality index. The rural amenity resources and human resources were counted as attraction factors, and a distance among villages was used as friction factor in gravity model. The weights of rural tourism amenity resources were calculated using the analytic hierarchy process(AHP) method and applied to evaluate green-tourism potentiality. The distance was measured with the shortest path among villages using geographic information system(GIS) network analysis. The spatial interaction from gravity model were employed as link weights between nodal points; a pair villages. Using the spatial interaction, the degree-centrality and prestige-centrality indices were calculated by social network analysis and demonstrated possibility of developing integrated green-tourism region centered on high centrality villages.