• Electronics and Telecommunications Trends
• /
• v.32 no.6
• /
• pp.8-16
• /
• 2017

In this paper, we review studies attempting to triumph over the limitation of Si-based semiconductor technologies through a heterogeneous integration of high mobility compound semiconductors on a Si substrate, and the co-integration of electronic and/or optical devices. Many studies have been conducted on the heterogeneous integration of various materials to overcome the Si semiconductor performance and obtain multi-purpose functional devices. On the other hand, many research groups have invented device fusion technologies of electrical and optical devices on a Si substrate. They have co-integrated Si-based CMOS and InGaAs-based optical devices, and Ge-based electrical and optical devices. In addition, chip and wafer bonding techniques through TSV and TOV have been introduced for the co-integration of electrical and optical devices. Such intensive studies will continue to overcome the device-scaling limitation and short-channel effects of a MOS transistor that Si devices have faced using a heterogeneous integration of Si and a high mobility compound semiconductor on the same chip and/or wafer.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.27-33
• /
• 1998

In this paper, we designed a demodulator using proposed synchronization techniques and algorithms for high-speed ATM satellite burst modem, and analyzed various performance in the AWGN channel. In addition, as the preamble progressed, each synchronization process can be analyzed by using the mean and variance characteristics, and the convergence state and operation state using convergence probability can also be determined. In conclusion, we analyzed the Cell Loss Ratio(CLR) by integrating the burst acquisition with Unique Word(UW) detector performance, and verified that proposed TDMA receiver satisfied the generally required CLR performance adequately.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.312-318
• /
• 2016

This paper presents a 2-6 GHz GaN HEMT power amplifier monolithic microwave integrated circuit (MMIC) with bridged-T all-pass filters and output-reactance-compensation shorted stubs using the $0.25{\mu}m$ GaN HEMT foundry process that is developed by WIN Semiconductors, Inc. The bridged-T filter is modified to mitigate the bandwidth degradation of impedance matching due to the inherent channel resistance of the transistor, and the shorted stub with a bypass capacitor minimizes the output reactance of the transistor to ease wideband load impedance matching for maximum output power. The fabricated power amplifier MMIC shows a flat linear gain of 20 dB or more, an average output power of 40.1 dBm and a power-added efficiency of 19-26 % in 2 to 6 GHz, which is very useful in applications such as communication jammers and electronic warfare systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1395-1402
• /
• 2015

An electric heat tracing system manages the temperature of pipes used in a plant. We propose a Zigbee-based wireless system so called the TESCON(: TEmperature Sensing and CONtrol) to monitor and control the electric heat tracing system in an integrated way. Simulations have been done to analyze the performance of the TESCON system. The performance of the TESCON system is validated by obtaining similar results via testbed operation. We also suggest an extension method of the TESCON system based on the hierarchical tree topology by adopting techniques such as network partition, channel reuse and frame aggregation.

• Journal of information and communication convergence engineering
• /
• v.4 no.1
• /
• pp.18-22
• /
• 2006

A small-sized gas identification system has been fabricated and characterized using an integrated gas sensor array and artificial neural-network. The sensor array consists of four thick-film oxide semiconductor gas sensors whose sensing layers are $In_{2}O_{3}-Sb_{2}O_{5}-Pd-doped\;SnO_2$ + Pd-coated layer, $La_{2}O_{5}-PdCl_{2}-doped\;SnO_2,\;WO_{3}-doped\;SnO_{2}$ + Pt-coated layer and $ThO_{2}-V_{2}O_{5}-PdCl_{2}\;doped\;SnO_{2}$. The small-sized gas identification instrument is composed of a GMS 81504 containing an internal ROM (4k bytes), a RAM (128 bytes) and four-channel AD converter as MPU, LEDs for displaying alarm conditions for three gases (liquefied petroleum gas: LPG, liquefied natural gas: LNG and carbon monoxide: CO) and interface circuits for them. The instrument has been used to identify alarm conditions for three gases among the real circumstances and the identification has been successfully demonstrated.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1097-1109
• /
• 2016

Fault detection and isolation are related to system monitoring, identifying when a fault has occurred, and determining the type of fault and its location. Fault detection is utilized to determine whether a problem has occurred within a certain channel or area of operation. Fault detection and diagnosis have become increasingly important for many technical processes in the development of safe and efficient advanced systems for supervision. This paper presents an integrated technique for fault diagnosis and classification for open- and short-circuit faults in three-phase inverter circuits. Discrete wavelet transform and principal component analysis are utilized to detect the discontinuity in currents caused by a fault. The features of fault diagnosis are then extracted. A fault dictionary is used to acquire details about transistor faults and the corresponding fault identification. Fault classification is performed with a fuzzy logic system and relevance vector machine (RVM). The proposed model is incorporated with a set of optimization techniques, namely, evolutionary particle swarm optimization (EPSO) and cuckoo search optimization (CSO), to improve fault detection. The combination of optimization techniques with classification techniques is analyzed. Experimental results confirm that the combination of CSO with RVM yields better results than the combinations of CSO with fuzzy logic system, EPSO with RVM, and EPSO with fuzzy logic system.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.126-127
• /
• 2013

In industry, Supervisory Control and Data Acquisition (SCADA) system plays critical role to ensure production is monitored and controlled rigorously and in timely manner. Having a cost saving yet still effective SCADA system would be much desired by Industry. SCADA itself is a field with constant development and research like how this paper investigates on creating an extremely low cost device, which can be adapted to many different SCADA applications through some very basic programming when combined with relevant peripherals. Much of the process in some expensive SCADA application based on smartphone application is due to specialized communication infrastructure. This paper addresses the needs by developing low cost and integrated wireless SCADA system. The system features capability on accessing the performance of remotely situated device parameter, such as temperature, control analog or digital input output on real time basis. We use existing mobile network capability through Bluetooth communication channel.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.2
• /
• pp.88-92
• /
• 2006

We present a microfluidic system with microvalves and a micropump that are easily integrated on the same substrate using the same fabrication process. The fabricated microfluidic system is suitable for use as a disposable device and its characteristics are optimized for use as a micro chemical analysis system (micro-TAS) and lab-on-a-chip. The system is realized by means of a polydimethylsiloxane (PDMS)-glass chip and an indium tin oxide (ITO) heater. We demonstrate the integration of the micropump and microvalves using a new thermopneumatic-actuated PDMS-based microfluidic system. A maximum pumping rate of about 730 nl/min is observed at. a duty ratio of 1 $\%$ and a frequency of 2 Hz with a fixed power of 500 mW. The measured power at flow cut-off is 500 mW for the microvalve whose channel width, depth and membrane thickness were 400 $\mu$m, 110 $\mu$m, and 320 $\mu$m, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.275-277
• /
• 1999

A application possibility of photoresist flexible film for optical waveguide is proposed and described. The optical waveguide dimensions that is consists of Mach-zehnder interferometric and single channel waveguide based on the single-mode conditions in LiNbO$_3$ device was utilized and fabricated by wet etching technique. This Polymer material for core layer is SU-8/5O(Microchem.) and its refractive index from prism couping method was measured about 1.59 thickness about 10${\mu}{\textrm}{m}$ at wavelength 0.6328${\mu}{\textrm}{m}$. From the results, this work can show the possibility of fabricating a flexible optical waveguide in the field of integrated optics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.1
• /
• pp.90-96
• /
• 2014

IEEE802.15.4 that is a standard for sensor networks is mainly used the wireless personal area networks such as ZigBee networks and it features low-power, low-speed data communication. However, recently research for interworking sensor network based voice communication and Session Initiation Protocol (SIP) for long-range, multi-user support has been actively conducted. In this paper, we designed a integrated base station based existing systems for interworking sensor networks based voice communication and SIP. We measured number of packet and delay according to increase the number of users to evaluate the performance of designed Base Station.