• Bulletin of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.995-998
• /
• 2007

Pentacene moiety has been widely studied in Organic Thin-Film Transistor (OTFT) device as a channel layer because of high carrier mobility. In this study, we have fabricated vertical type Organic Static Induction Transistors (SITs) using pentacene, 6,13-Dinaphthalen-1-ly-Pentacene (1-DNP, 3), and 6,13-Dinaphthalen-2- ly-Pentacene (2-DNP, 4). 1-DNP and 2-DNP have same naphtyl group with pentacene, but different linked position and spatial arrangement. We have checked the static characteristics of materials in vertical type SITs device. We found that pentacene has as on/off ratio of 14.56, 1-DNP and 2-DNP shows as on/off ratio of 36.58 and 6.61 at VDS = 2V in SIT, respectively.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.4
• /
• pp.173-179
• /
• 2006

Due to the limitations of the channel length, the lateral spread for two-dimensional impurity distributions is critical for the analysis of devices including the integrated complementary metal oxide semiconductor (CMOS) circuits and high frequency semiconductor devices. The developed codes were then compared with the two-dimensional implanted profiles measured by transmission electron microscope (TEM) as well as simulated by a commercial TSUPREM4 for verification purposes. The measured two-dimensional TEM data obtained by chemical etching-method was consistent with the results of the developed analytical model, and it seemed to be more accurate than the results attained by a commercial TSUPREM4. The developed codes can be applied on a wider energy range $(1KeV{\sim}30MeV)$ than a commercial TSUPREM4 of which the maximum energy range cannot exceed 1MeV for the limited doping elements. Moreover, it is not only limited to diffusion process but also can be applied to implantation due to the sloped and nano scale structure of the mask.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.6
• /
• pp.342-346
• /
• 2004

A thermopneumatic-actuated polydimethylsiloxane (PDMS) micropump has been fabricated and their properties are characterized. The diffusers are used as a flow-rectifying element instead of passive check valves. The advantages of the proposed microvalve are of the low cost fabrication process and the transparent optical property using PDMS and indium tin oxide (ITO) glass. We presented the PDMS micropump that is easily integrated with the in-channel PDMS microvalves on the same substrate. The flowrate of the micropump increases linearly as the applied pulse voltage to the ITO heater increases. The fabricated ITO heater resistance is 6.54k$\Omega$. The peak of the flow rate is observed at the duty ratio of 10% for the applied pulse voltage of 55V at 6Hz and the maximum flow rate of 78nl/min is measured.

• Journal of electromagnetic engineering and science
• /
• v.4 no.2
• /
• pp.56-62
• /
• 2004

We present a multi-Gbit/s digital I/O interface based on RF-modulation and capacitive-coupling over an impedance matched transmission line. The RF-interconnect(RFI) can greatly reduce the digital switching noise and eliminate the dc power dissipation over the channel. It also enables reduced signal amplitude(as low as 200 ㎷) with enhanced data rate and affordable circuit overhead. This paper addresses the system advantages and implementation issues of RFI. A prototype on-chip RFI transceiver is implemented in 0.18-${\mu}{\textrm}{m}$ CMOS. It demonstrates a maximum data rate of 2.2 Gbit/s via 10.5-㎓ RF-modulation. The RFI can be very instrumental for future high-speed inter- and intra-ULSI data links.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.10a
• /
• pp.1-23
• /
• 1998

Sustainable agriculture in Korea will gain important momentum by implementing The Direct Payment Scheme for Environmentally Friendly Agriculture in 1999. The farmers who want to participate in the program will be paid 530,000won/ha directly by the Government in return for engaging sustainable agriculture. The policy scheme which is a pilot program will be restricted to environmentally regulated areas to apply such as water supply protection zone, environmental protection districts and national parks. As a consequence of the policy, the supply of transitional organic agricultural products is expected to increase significantly. However the increased supply of low input agricultural products may have difficulties to find an appropriate marketing channel which is differentiated from the general agricultural product market. Development of an open market system for mass transaction of the low imput agricultural products is necessary. Also various government programs and projects which are designed for clean environment and regional community development must be integrated into the sustainable agriculture program to have synergy effects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.608-615
• /
• 2008

Recently, research on GNSS signal receiver, aiding system and integrated navigation system approaching to the new satellite navigation system is needed. It it necessary to develop the GNSS simulator not only to understand the new satellite navigation system but also to develop the core technology about the system. In this paper, the simulator of the GPS and Galileo satellite nagivation is developed in IF(intermediate frequency) signal level.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.118-119
• /
• 2007

High performance three-dimensional (3-D) stacked poly-Si complementary metal-oxide semiconductor (CMOS) inverters with a high quality laser crystallized channel were fabricated. Low temperature crystallization methods of a-Si film using the excimer-laser annealing (ELA) and sequential lateral solidification (SLS) were performed. The NMOS thin-film-transistor (TFT) at lower layer of CMOS was fabricated on oxidized bulk Si substrate, and the PMOS TFT at upper layer of CMOS was fabricated on interlayer dielectric film. The 3-D stacked poly-Si CMOS inverter showed excellent electrical characteristics and was enough for the vertical integrated CMOS applications.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.51-53
• /
• 2002

This research aims to develop a multiple channel electrochemical DNA chip using micro-fabrication technology. At first, we fabricated a high integrated type DNA chip array by lithography technology. Several probe DNAs consisting of thiol group at their 5-end were immobilized on the sold electrodes. Then target DNAs were hybridized by an electrical force. Redox peak of cyclic-voltammogram showed a difference between target DNA and mismatched DNA in the anodic peak current. Therefore, it is able to detect a various genes electrochemically after immobilization of a various probe DNA and hybridization of label-free DNA on the electrodes simultaneously. It suggested that this DNA chip could recognize the sequence specific genes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.410-411
• /
• 2006

High throughput analysis using a DNA chip microarray is powerful tool in the post genome era. Less labor-intensive and lower cost-performance is required. Thus, this paper aims to develop the multi-channel type label-free DNA chip and detect SNP (Single nucleotide polymorphisms). At first, we fabricated a high integrated type DNA chip array by lithography technology. Various probe DNAs were immobilized on the microelectrode array. We succeeded to discriminate of DNA hybridization between target DNA and mismatched DNA on microarray after immobilization of a various probe DNA and hybridization of label-free target DNA on. the electrodes simultaneously. This method is based on redox of an electrochemical ligand.

• Asia pacific journal of information systems
• /
• v.11 no.4
• /
• pp.27-41
• /
• 2001

CRM is at the core of any customer-focused business strategy and includes the people, processes, and technology questions associated with marketing, sales, and service. In today's hyper-competitive world, organizations looking to implement successful CRM strategies need to focus on a common view of the customer using integrated information systems and contact center implementations that allow the customer to communicate via any desired communication channel. A CRM solution contains a number of sophisticated tools that enable to extract detailed information about customers. This information can be used to gain a better understanding of customers. From this we can determine trends, and so refine business toward customers' needs and target new products to particular customer groups. This paper presents an approach for forming the product-customer groups using neural networks for customer relationship management. The Carpenter-Grossberg's neural network, which has been used for manufacturing cell formation in group technology, is modified and applied for product-customer group formation. As a result of numerical experiments, it is also useful for more complex problems in which customers have different preferences for each product.