• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.105-113
• /
• 2015

The incidents related to transporting hazardous materials may cause serious impacts on neighborhood and surrounding areas. It is essential to have a real-time safe management system for incidents prevention of transporting hazardous materials. Currently, the system is not integrated into one channel, which makes it difficult to control an incidents response. Another problem is that event status is not appropriately shared among authorities having responsibilities taking down the incidents. This paper investigates previous studies covering the real-time safety management system for hazard material transports and suggests an integrated management system that helps communicate effectively and promptly.

• 센서학회지
• /
• 제31권4호
• /
• pp.194-213
• /
• 2022

This study comprehensively reviewed four types of integrated-optic electric-field sensors based on titanium diffused lithium-niobate waveguides: symmetric and asymmetric Mach-Zehnder interferometers, 1×2 directional couplers, and Y-fed balanced-bridge Mach-Zehnder interferometers. First, we briefly explain the crystal properties and electro-optic effect of lithium niobate and the waveguide fabrication process. We theoretically analyzed the key parameters and operating principles of each sensor and antennas. We also describe and compare the design, simulation, implementation, and performance tests: dc and ac characteristics, frequency response, dynamic range, and sensitivity. The experimental results revealed that the sensitivity of the sensor based on the Y-fed balanced bridge Mach-Zehnder interferometer (YBB-MZI) was higher than that of the other types of sensors.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2022년도 추계학술발표대회
• /
• pp.295-296
• /
• 2022

작물을 경작 해충과 질병은 오랫동안 주요 관심사였다. 농업에서 병해충을 탐지하기 위해 전통적인 방법을 사용하는 것은 더 이상 높은 효율성을 제공하지 않는다. 오늘날 과학과 인공 지능의 폭발적인 발달로 인해 농업분야의 연구원들은 병해충을 탐지하기 위해 딥 러닝을 적용하고 있다. 최근에 다양한 분야의 문제들을 해결하기 위해 수많은 모델들이 발표되었지만, 많은 병해충 진단 딥러닝을 사용한 방법들은 하드웨어 리소스를 낭비하고 실제 농장에서 사용하기 어렵다. 따라서 본 논문에서는 작물의 병해충을 분류하기 위해 Select Kernel Attention(SK Attention)을 Channel Attention Module 로 변경하여 Decoupling-and-Attention network (DANet)을 하드웨어 리소스 사용을 최소화한다.

• 센서학회지
• /
• 제20권5호
• /
• pp.357-362
• /
• 2011

This paper demonstrates a novel electrodynamic technique to remove particles from the wall of microchannels. Dielectrohporesis(DEP) is generated by applying alternating electric potentials to the interdigitated electrodes integrated at the bottom of the micro-channel. The proposed technique is applied to a general microfluidic channel as a feasibility test. To examine the wall loss reduction efficiency, 10 ${\mu}m$ diameter Polystyrene latexes(PSL) were supplied to the inlet of the device. Then, the concentration of collected particles through devices was measured. In the experiment for 10 ${\mu}m$ diameter PSL particles, the concentration of the injected particles was $174.25{\times}10^4$ particles/ml. However, the concentration of collected particles at the outlet was $52.25{\times}10^4$ particles/ml. Only 30 % of particles had arrived at the outlet and 70 % of particles had adhered to the wall of the microfluidic channel. By applying alternating electric potentials from 0 to 20 $V_{pp}$ at 3 MHz, the concentration of injected particles was 135.00${\times}10^4$ particles/ml, the concentration of collected particles was increased as $105.25{\times}10^4$ particles/ml at 20 $V_{pp}$ at the outlet. When the electric potential was 20 $V_{pp}$, the particle loss was decreased by 39 % (initial loss: 70 %, loss at 20 Vpp: 31 %) with 10 ${\mu}m$ particle. The particle loss was decreased along to the incensement of electric potentials and the enlargement of the diameter of particles. According to these measured results, it was confirmed that the proposal of using DEP technique could be a good candidate for particle loss reduction in micro-particle processing chip application. Moreover, it is expected that the proposed technique could enhance performance of microfluidic and biochip devices.

• 한국인터넷방송통신학회논문지
• /
• 제13권6호
• /
• pp.195-202
• /
• 2013

무선 통신과 방송 기술의 급격한 발전에 의해 다양한 통신, 방송 매체들이 등장하였고 이를 서비스하기 위한 주파수 자원이 부족한 실정이다. DMB는 SFN 방송망을 구성하여 권역별로 하나의 통합 채널을 통해 방송을 서비스할 수 있어 주파수 사용효율측면에서 유리하다. 하지만 국내 DMB는 기존 아날로그 TV 대역을 사용하고 있으며, 아날로그 TV와의 간섭문제 때문에 일부 지역에서는 다수의 채널을 사용하고 있다. 하지만 아날로그 TV 방송이 종료됨에 따라 간섭문제가 해결되었고, 이에 따라 주파수의 효율적인 사용을 위해 지상파 DMB의 채널 재배치가 필요한 실정이다. 본 논문에서는 지상파 DMB의 채널 재배치 방안을 제안하고 이에 따른 송수신환경 변화를 모의실험을 통해 분석하고 검증하였다.

• 한국광학회지
• /
• 제18권1호
• /
• pp.79-83
• /
• 2007

본 논문에서는 서로 다른 FSR (free spectral range)을 갖는 두 개의 가변 (tunable) 폴리머 링 공진기 기반의 $1{\times}2$ 스위치를 이용하여 광학적 방식의 채널 선택이 가능한 재구성형 (reconfigurable) 마이크로웨이브 (microwave: MW) 필터를 제안하고 구현하였다. 각 링 공진기는 두 개의 링이 연결되어 있으며 한 개의 링 위에 전극이 형성되어 있으며, 이 전극에 전압을 인가함으로써 열광학효과를 통해 On/Off 스위치로서 동작된다. 입력 MW 신호에 의해서 변조된 광신호를 이 스위치를 통해 특정 포트로 라우팅(routing)하고 광검출기를 통해 복원함으로써 두 개의 채널이 선택되는 MW 대역통과 필터 특성을 얻었다. 중심주파수가 10 GHz인 채널 I 이 선택된 경우, 소멸비는 ${\sim}30dB$, 대역폭은 1 GHz, Q값은 10, 최대 소비전력은 4.1 mW였다. 그리고 중심주파수가 20 GHz인 채널II가 선택된 경우에는 소멸비는 ${\sim}30dB$, 대역폭은 2 GHz, Q값은 10, 최대 소비전력은 8 mW였으며, 각 채널 간의 격리도는 24 dB 이상이었다.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.1-6
• /
• 2011

In this paper, the IC(Integrated Circuit) for multi-channel synchronous communication was designed by using FPGA and VHDL language. The existing chips for synchronous communication that has been used commercially are composed for one to two channels. Therefore, when communication system with three channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 synchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 1024 bytes respectively and consequently high speed communication became possible. It was designed with a communication signal of a form various encoding. To detect errors of communications, the CRC-ITU-T logic and channel MUX logic was designed with hardware logics so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. In order to show the performance of designed IC, the test was conducted successfully in Quartus simulation and experiment and the excellence was compared with the 85C3016VSC of ZILOG company that are used widely as chips for synchronous communication.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.371.2-371.2
• /
• 2016

Graphene electronics is one of the promising technologies for the next generation electronic devices due to the outstanding properties such as conductivity, high carrier mobility, mechanical, and optical properties along with extended applications using 2 dimensional heterostructures. However, large contact resistance between metal and graphene is one of the major obstacles for commercial application of graphene electronics. In order to achieve low contact resistance, numerous researches have been conducted such as gentle plasma treatment, ultraviolet ozone (UVO) treatment, annealing treatment, and one-dimensional graphene edge contact. In this report, we suggest a fabrication method of one-dimensional graphene metal edge contact without using graphene exfoliation. Graphene is grown on Cu foil by low pressure chemical vapor deposition. Then, the graphene is transferred on $SiO_2/Si$ wafer. The patterning of graphene channel and metal electrode is done by photolithography. $O_2$ plasma is applied to etch out the exposed graphene and then Ti/Au is deposited. As a result, the one-dimensional edge contact geometry is built between metal and graphene. The contact resistance of the fabricated one-dimensional metal-graphene edge contact is compared with the contact resistance of vertically stacked conventional metal-graphene contact.

• ETRI Journal
• /
• 제36권2호
• /
• pp.214-223
• /
• 2014

A fully-integrated penta-band reconfigurable power amplifier (PA) is developed for handset Tx applications. The output structure of the proposed PA is composed of the fixed output matching network, power and frequency reconfigurable networks, and post-PA distribution switches. In this work, a new reconfiguration technique is proposed for a specific band requiring power and frequency reconfiguration simultaneously. The design parameters for the proposed reconfiguration are newly derived and applied to the PA. To reduce the module size, the switches of reconfigurable output networks and post-PA switches are integrated into a single IC using a $0.18{\mu}m$ silicon-on-insulator CMOS process, and a compact size of $5mm{\times}5mm$ is thus achieved. The fabricated W-CDMA PA module shows adjacent channel leakage ratios better than -39 dBc up to the rated linear power and power-added efficiencies of higher than around 38% at the maximum linear output power over all the bands. Efficiency degradation is limited to 2.5% to 3% compared to the single-band reference PA.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.59-63
• /
• 2005

금속-강유전체-반도체 전계효과 트랜지스터 (MFS/MFISFET)의 동작 특성을 technology computer-aided design (TCAD)과 simulation program with integrated circuit emphasis (SPICE)를 결합하여 전산모사하는 방법을 제시하였다. 복잡한 강유전체의 동작 특성을 수치해석을 이용하여 해석한 다음, 이를 이용하여 금속-강유전체-반도체 구조에서 반도체 표면에 인가되는 표면 전위를 계산하였다. 계산된 TCAD 변수인 표면 전위를 전계효과 트랜지스터의 SPICE 모델에서 구한 표면 전위와 같다고 보고게이트 전압에 따른 전류전압 특성을 구할 수 있었다. 이와 같은 방법은 향후 MFS/MFISFET를 이용한 메모리소자의 집적회로 설계에 매우 유용하게 적용될 수 있을 것이다.