• 한국수자원학회논문집
• /
• 제50권4호
• /
• pp.263-275
• /
• 2017

고정확도의 도시침수 모의를 위해서는 물리적 개념에 기반한 통합적 수치해석이 필요하다. 본 연구에서는 Lee et al. (2015)이 개발한 1차원 하수관망, 2차원 범람 모형의 국내 적용성을 검토하고, 과거 도시 홍수 사상의 침수 원인 분석을 수행하였다. 본 모형은 이중배수 개념에 기반하여 멘홀 대신 집수구를 지표면과 하수관망 사이의 교환유량 산정 지점으로 이용하므로 보다 실제와 유사하게 침수 과정을 모의할 수 있을 뿐 아니라 지표면 범람 해석시 건물에 의한 차단 효과를 고려할 수 있다. 개발된 모형의 적용성은 서울 사당 유역에서 발생한 침수 사상에 대해서 재현 모의를 통해 검증하였다. 적용 결과, 본 연구에서 개발된 모형은 실제 침수 피해 영역을 실제와 유사하게 모의 하였을 뿐만 아니라 침수 원인을 보다 자세히 분석할 수 있는 장점을 보여주었다.

• Journal of Korean Dental Science
• /
• 제15권1호
• /
• pp.19-30
• /
• 2022

Purpose: The purpose of the study was to assess the validity of three-dimensional (3D) facial scan taken with facial scanner and digital photo wrapping on the cone-beam computed tomography (CBCT). Materials and Methods: Twenty-five patients had their CBCT scan, two-dimensional (2D) standardized frontal photographs and 3D facial scan obtained on the same day. The facial scans were taken with a facial scanner in an upright position. The 2D standardized frontal photographs were taken at a fixed distance from patients using a camera fixed to a cephalometric apparatus. The 2D integrated facial models were created using digital photo wrapping of frontal photographs on the corresponding CBCT images. The 3D integrated facial models were created using the integration process of 3D facial scans on the CBCT images. On the integrated facial models, sixteen soft tissue landmarks were identified, and the vertical, horizontal, oblique and angular distances between soft tissue landmarks were compared among the 2D facial models and 3D facial models, and CBCT images. Result: The results showed no significant differences of linear and angular measurements among CBCT images, 2D and 3D facial models except for Se-Sn vertical linear measurement which showed significant difference for the 3D facial models. The Bland-Altman plots showed that all measurements were within the limit of agreement. For 3D facial model, all Bland-Altman plots showed that systematic bias was less than 2.0 mm and 2.0° except for Se-Sn linear vertical measurement. For 2D facial model, the Bland-Altman plots of 6 out of 11 of the angular measurements showed systematic bias of more than 2.0°. Conclusion: The facial scan taken with facial scanner showed a clinically acceptable performance. The digital 2D photo wrapping has limitations in clinical use compared to 3D facial scans.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권2호
• /
• pp.143-149
• /
• 2008

A novel compact model for a five-port transformer balun is proposed for the efficient circuit design of hybrid balun. Compared to the conventional model, the proposed model provides much faster computation time and more reasonable values for the extracted parameters. The hybrid balun, realized in $0.18\;{\mu}m$ CMOS, achieves 2.8 dB higher gain and 1.9 dB lower noise figure than its passive counterpart only at a current consumption of 0.67 mA from 1.2 V supply. By employing the hybrid balun, a differential zero-IF receiver is designed in $0.18\;{\mu}m$ CMOS for IEEE 802.15.4 ZigBee applications. It is composed of a differential cascode LNA, passive mixers, and active RC filters. Comparative investigations on the three receiver designs, each employing the hybrid balun, a simple transformer balun, and an ideal balun, clearly demonstrate the advantages of the hybrid balun in fully differential CMOS RF receivers. The simulated results of the receiver with the hybrid balun show 33 dB of conversion gain, 4.2 dB of noise figure with 20 kHz of 1/f noise corner frequency, and -17.5 dBm of IIP3 at a current consumption of 5 mA from 1.8 V supply.

• Journal of information and communication convergence engineering
• /
• 제20권2호
• /
• pp.137-142
• /
• 2022

Monolithic three-dimensional (M3D) logics such as M3D-NAND, M3D-NOR, M3D-buffer, M3D 2×1 multiplexer, and M3D D flip-flop, consisting of modularized M3D inverters (M3D-INVs), have been proposed. In the previous M3D logic, each M3D logic had to be designed separately for a standard cell library. The proposed M3D logic is designed by placing modularized M3D-INVs and connecting interconnects such as metal lines or monolithic inter-tier-vias between M3D-INVs. The electrical characteristics of the previous and proposed M3D logics were simulated using the technology computer-aided design and Simulation Program with Integrated Circuit Emphasis with the extracted parameters of the previously developed LETI-UTSOI MOSFET model for n- and p-type MOSFETs and the extracted external capacitances. The area, propagation delay, falling/rising times, and dynamic power consumption of the proposed M3D logic are lower than those of previous versions. Despite the larger space and lower performance of the proposed M3D logic in comparison to the previous versions, it can be easily designed with a single modularized M3D-INV and without having to design all layouts of the logic gates separately.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.6-14
• /
• 2012

For integrated complementary metal oxide semiconductor (CMOS) circuits, the lateral spread for two-dimensional (2-D) impurity distributions are very important for the analyzing the devices. The measured two-dimensional SEM data obtained using the chemical etching-method matched very well with the results of the Gauss model for boron implanted samples. But the profiles in boron implanted silicon were deviated from the Gauss model. The profiles in boron implanted silicon were shown a little bit steep profile in the deep region due to backscattering effect on the near surface from the bombardments of light boron ions. From the simulated 3-D data obtained using an analytical model, the 1-D and 2-D data were compared with the experimental data and could be verified the justification from the experimental data. The data of 3-D model were also shown good agreements with the experimental and the simulated data. It can be used in the 3-D chip design and the analysis of microelectro-mecanical system (MEMS) and special devices.

• 한국축산식품학회지
• /
• 제41권4호
• /
• pp.623-635
• /
• 2021

The effect of deer antler extract on muscle differentiation and muscle atrophy were evaluated to minimize muscle loss following aging. Various deer antler extracts (HWE, hot water extract of deer antler; FE, HWE of fermented deer antler; ET, enzyme-assisted extract of deer antler; UE, extract prepared by ultrasonication of deer antler) were evaluated for their effect on muscle differentiation and inhibition of 5-aminoimidazole-4-carboxamide ribonucleoside (AICAR)-induced muscle atrophy in C2C12 cells. Morphological changes according to the effect of antler extracts on muscle differentiation were confirmed by Jenner-Giemsa staining. In addition, the expression levels of genes related to muscle differentiation and atrophy were confirmed through qRT-PCR. In the presence of antler extracts, the length and thickness of myotubes and myogenin differentiation 1 (MyoD1) and myogenic factor 5 (Myf5) gene expression were increased compared to those in the control group (CON). Gene expression of AMP-activated protein kinase (AMPK), MyoD1, and myogenin, along with the muscle atrophy factors muscle RING finger-1 (MuRF-1) and forkhead box O3a (FoxO3a) upon addition of deer antler extracts to muscle-atrophied C2C12 cells was determined by qRT-PCR after treatment with AICAR. The expression of MuRF-1 and FoxO3a decreased in the groups treated with antler extracts compared to that in the group treated with AICAR alone. In addition, gene expression of MyoD1 and myogenin in the muscle atrophy cell model was significantly increased compared that into the CON. Therefore, our findings indicate that antler extract can increase the expression of MyoD1, Myf5 and myogenin, inhibit muscle atrophy, and promote muscle differentiation.

• Spatial Information Research
• /
• 제18권1호
• /
• pp.49-56
• /
• 2010

시가지 범람 문제를 고려할 경우 침수심의 정량적인 수치계산에 의한 재해 위험을 평가하는 것이 중요하다. 본 연구에서는 2002년 막대한 시가지 침수 피해를 경험한 바 있는 삼척시를 대상으로 범람 모의 계산에 의한 시가지 침수피해 평가를 수행하였다, 입력자료의 변환과정에서 생길 수 있는 에러를 줄이기 위해 시가지 조도계수, 표고, 건물의 점유율 등은 ArcGIS에서 바로 전산화하여 시가지 범람모형을 구축하였으며 계산된 침수심을 토대로 격자별로 피해액을 산정하였다 본 연구를 통하여 강우유출, 침수심 모의 계산, 피해액의 정량적 산정이라는 일연의 과정이 통합적으로 수행되어 향후 시가지 배수계획에 기여할 것으로 기대된다.

• 천문학회보
• /
• 제41권1호
• /
• pp.40.2-41
• /
• 2016

To understand the observed kinematics in the narrow-line region (NLR) of type 2 AGNs, we construct a model of 3-D biconical outflow combined with a thin dust plane. The model consists of two identical cones whose apex is located at the nucleus, and the cones are axisymmetric with respect to the bicone axis. After we define the properties of the bicone and the dust plane, we calculate a spatially integrated velocity and velocity dispersion along the line-of-sight using various physical parameters. As we test the effect of model parameters, we find three key parameters determining the integrated kinematics: intrinsic outflow velocity, bicone inclination, and the amount of dust extinction. The velocity dispersion increases as the intrinsic outflow velocity or the bicone inclination increases, while the velocity shift increases as the amount of dust extinction increases. We confirm that the integrated velocity dispersion can be a good indicator of the intrinsic outflow velocity unless dust extinction is not very strong (>~80%), while the effect of dust extinction can be alleviated by combining the integrated velocity and the velocity dispersion. Based on the simulated velocity distributions using the 3-D models, the variety of the observed [O $_{III}$] line profiles of type 2 AGNs can be well reproduced. In addition, we perform Monte Carlo simulations based on the different sets of model parameters. By comparing the model results with the observed [O $_{III}$] kinematics of ~39,000 SDSS type 2 AGNs (Woo et al. 2016), we find that the observed [O $_{III}$] velocity-velocity dispersion distribution is well reproduced by the biconical outflow model, enabling us to constrain the intrinsic physical parameters of outflows.

• 정보처리학회논문지D
• /
• 제16D권3호
• /
• pp.381-394
• /
• 2009

소프트웨어 모델링 과정에서 생성되는 산출물들에 대한 모델의 재사용성을 향상시키기 위한 기법으로, MDA 모델 기반의 개발방법이 적용되고 있다. 아직도, UML을 이용한 MDA 기반의 개발에 대한 계층적이고 체계적인 기법은 미약한 상태이다. 이로 인해, MDA 메타모델에 기반한 일관성 있고 재사용성이 높은 MDA 모델링이 제대로 실현되지 못하고 있다. 본 논문은 이를 해결하기 위해, 2+1 View 통합 메타모델을 통한 MDA(PIM/PSM) 컴포넌트 모델링 기법을 제시한다. 먼저, 개발 프로세스 view와 MVC View를 표현할 수 있는 meta-architecture view 모델을 정의한다. 정의된 meta-architecture view 계층의 메타 레벨에서, 개발 프로세스 view와 MVC view별로 MDA 기반의 계층적 통합 메타 모델이 제시된다. 이 메타모델은 UML 모델과 GUI 모델이 갖는 모델링 요소들을 PIM과 PSM에 의해 계층적으로 표현한다. 제시한 메타모델을 ISMS 시스템에 적용하여 MDA 기반의 컴포넌트 모델링 사례를 제시한다. 이를 통해, 개발단계별 및 MVC 방식에 의해 일관성 있고 계층적인 MDA 컴포넌트 모델을 구축할 수 있다. 따라서, 모델에 대한 독립성과 재사용성의 향상을 기대할 수 있다.

• 한국통신학회논문지
• /
• 제32권5A호
• /
• pp.490-496
• /
• 2007

본 논문에서는 IEEE802.11a 무선랜용 Front-End 집적화 초소형 모듈을 측정기반 거동 모델을 기반으로 한 behavioral-level 시뮬레이션을 수행하여 설계 제작 하였다. IEEE802.11a 무선랜 표준을 만족시키기 위해 54Mbps 전송속도의 64QAM 변조 방식 심볼을 1024개 전송하는 시스템을 구현하고 이 환경에서 ACPR과 EVM 시뮬레이션을 수행하여 비선형 특성을 확인하였다. 중심주파수 5.8GHz에서 30MHz, 20MHz와 11MHz 떨어진 ACPR의 우측 offset은 각각 49.36dBc, 36.90dBc와 24.58dB이고 좌측 Offset은 각각 50.14dBc, 34.04dBc와 28.85dBc이며 EVM은 2.94%이다. LTCC 공정을 사용하여 5층 기판으로 제작한 모듈의 크기는 $13.4mm{\times}14.2mm$이다. 송신단 특성은 P1dB가 16.2dBm, 전력이득은 16.73dB로, 수신단의 특성은 소신호 이득이 16.24dB, 잡음지수가 7.83dB로 측정되었다.