• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1648-1655
• /
• 1997

The intake noise, a major source of vehicle noises, has rapidly become a noticeable, and has been studied to reduce the level. Traditionally, the intake system has been developed through a experiment, namely, the trial and error process. This approach requires very high cost and long time consuming to develop the system. Recently, FEM and BEM are becoming useful in analysis of the intake system, and te results of analysis are very valid. But because these techniques also require high cost and long analysis time, these are generally not practical tool at the early stage of the development of an intake system. In this study, the software was developed to predict and analyze the acoustic characteristics of an intake system. It was based on the Transfer Matrix Method and operated to analyze a simplified intake system in a personal computer. It can be used early in the design stage of development of the intake system. This study presented an improvement to reduce the level of an intake noise. It was to select the optimum position of a resonator and verified by NIT/SYSNOISE, FE analysis commercial software, and testing a prototype.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1654-1660
• /
• 2000

Recently, the regulations from the government and the concerns of people give rise to the interest in exhaust and intake noise of passenger car as much as other vehicles. In these demands, performance prediction software was developed in the previous study. In this study, Robust design was used for improving the noise reduction capacity of intake system with the performance prediction software. On the basis of the existing design, length and radius of each component that was thought to effect to capacity of intake system was selected. At first factors are arranged by using $L_{18}$ table of orthogonal array and then optimum value can be obtained by $L_{16}$ table of orthogonal array.

• Smart Structures and Systems
• /
• 제7권1호
• /
• pp.1-13
• /
• 2011

It has been shown in the literature that active adjustment of the intake area of a jet engine has potential to improve its fuel efficiency. This paper presents the design and control of a novel proof-of-concept active jet engine intake using Nickel-Titanium (Ni-Ti or Nitinol) shape memory alloy (SMA) wire actuators. The Nitinol SMA material is used in this research due to its advantages of high power-to-weight ratio and electrical resistive actuation. The Nitinol SMA material can be fabricated into a variety of shapes, such as strips, foils, rods and wires. In this paper, SMA wires are used due to its ability to generate a large strain: up to 6% for repeated operations. The proposed proof-of-concept engine intake employs overlapping leaves in a concentric configuration. Each leaf is mounted on a supporting bar than can rotate. The supporting bars are actuated by an SMA wire actuator in a ring configuration. Electrical resistive heating is used to actuate the SMA wire actuator and rotate the supporting bars. To enable feedback control, a laser range sensor is used to detect the movement of a leaf and therefore the radius of the intake area. Due to the hysteresis, an inherent nonlinear phenomenon associated with SMAs, a nonlinear robust controller is used to control the SMA actuators. The control design uses the sliding-mode approach and can compensate the nonlinearities associated with the SMA actuator. A proof-of-concept model is fabricated and its feedback control experiments show that the intake area can be precisely controlled using the SMA wire actuator and has the ability to reduce the area up to 25%. The experiments demonstrate the feasibility of engine intake area control using an SMA wire actuator under the proposed design.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권23호
• /
• pp.10293-10298
• /
• 2015

Background: Previous epidemiologic studies on the association between energy intake and endometrial cancer risk have only generated contradictory results. The role of energy intake in endometrial carcinogenesis thus remains unclear. To quantitatively assess the potential association between energy intake and endometrial cancer, a meta-analysis of case-control and cohort studies was here conducted. Materials and Methods: Eligible studies were retrieved via both computerized searches and review of references. Fixed-or random-effect models were used to summarize the estimates of OR with 95%CIs. Stratified analyses on study design, region and macronutrients' calorie were performed. Results: Sixteen studies met the inclusion criteria of the meta-analysis. No association between total energy intake and endometrial cancer was observed in either overall group (OR=1.11, 95%CI 0.92-1.30) or subgroups stratified by study design and region. In the specific macronutrients' calorie analysis, higher fat energy intake was found to be associated with increased endometrial risk (OR=1.72, 95%CI 1.12-2.32) while energy from carbohydrate and protein was not related to endometrial cancer risk. Conclusions: Our analysis did not support that total energy intake is related to endometrial cancer risk, in contrast to fat energy.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.41-46
• /
• 1996

The engine intake system noise has been recognized as a problem for many years. Acoustic design of intake system has traditionally been a trial and error process. This has resulted in the development of computer simulation program for a acoustic analysis and acoustic modeling. In this study, we developed the program based on the transfer matrix method which analyze and predict the performance of a intake noise. The program was verified by experiments on a real intake system. By using of the simulation program, we analyzed acoustic characteristics and, made proposals of improvement to reduce the intake noise and was verified by the SYSNOISE software.

• Journal of Advanced Marine Engineering and Technology
• /
• 제13권3호
• /
• pp.64-71
• /
• 1989

In this paper, a computer program for simulation of 4 cycle diesel engines including intake and exhaust manifold system is developed. The wave action theory is applied for optimization of the intake and exhaust manifold system. The calculation results of this computer program is finely accurate and agreed well with experimental results. Accordingly, it is recognized that the developed computer program can be utillized very usefully for the design of intake and manifold system. And then, influential factors of the engine performance in the design of intake manifold is numerically investigated by the calculation only. As the results it is concluded that the inertia one of the dynamic effects on the intake and exhaust maninfold affects mainly the engine performance and the pulsation one is a side effect.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.480-485
• /
• 2008

In this study, two types of ramjet intake were designed for the flight condition of Mach number 2 and 5 and numerical analysis was performed. In order to widen the flight envelope range(Mach number $2{\sim}6$), movable intake concept was applied. The central body was designed so that the capture area ratio which is one of most important factors of ramjet intake design could be adjusted. And various types of cowl and movable insert part of shell were designed in order to control throat area which could increase total pressure recovery. The numerical results showed that the designed ramjet intake could be applied in various flights Mach number.

• 한국소음진동공학회논문집
• /
• 제20권8호
• /
• pp.734-741
• /
• 2010

In this paper, an intake RCV system for low noise turbo engine was developed through optimization process of a geometric path of compressor housing and an open rate of recirculation valve. At first, the critical customer requirement from voice of customer was defined and quality function deployment of an intake RCV system was executed. And then, the renovative concept design using pugh matrix method was selected as final concept for satisfaction of requirement. Simultaneously, system analysis was carried by function diagram and fishbone diagram. Next, control factors and levels for the optimal design were performed. And, the optimal design of an intake RCV system was studied using design of experiment. Conclusively, we achieved not only cancellation tip-out noise at the driving condition but also improvement of NVH commodity through optimization process of an intake RCV system, which is optimal configuration of compressor housing and recirculation valve.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.367-368
• /
• 2012

In resent years, engineering thermoplastics represent a means for designers to integrate parts, facilitate assembly, reduce weight and lower the costs of their parts to improve the fuel efficiency and competitiveness of the cars. Thermoplastic turbo charger intake hose is one of most sophisticated application in thermoplastics under the hood. Used as part of weight & cost reduction and performance improvement program, thermoplastic turbo charger intake hose has been developed as rubber and metal replacement. For optimized product, NVH performance is a important criteria while keeping same durability required with current system. Though a number of studies have been conducted on the resonator hose and its analytical models, the most of studies were focused on transmission loss itself. This paper presents contribution of vehicle interior noise according to design parameters like profile, bellows type, bellows position, material characteristic. And we will review the design guidance for optimized product of thermoplastic turbo charger intake hose.

• 품질경영학회지
• /
• 제30권1호
• /
• pp.133-143
• /
• 2002

We propose an optimal design to improve the muffler's capacity by reducing the noise of the intake system by adapting kriging method with the robust design. For the first stage of a design, the length and radius of each component of the current muffler system are selected as control factors. Then, the $L_18$ table of orthogonal arrays is adapted to extract the effective main factors. As the second stage, the $L_18$ table of orthogonal arrays using kriging method is adapted to take the significant factors into consideration. As an optimal design, the $L_18$ table of orthogonal arrays with main effects is proposed and the kriging method is adapted for more efficient design. The kriging method improves the performance of intake system.