• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.429-429
• /
• 2007

For various applications of liquid crystal displays (LCDs), the uniform alignment of liquid crystal (LC) molecules on treated surfaces is significantly important. Generally, a rubbing method has been widely used to align the LC molecules on polyimide (PI) surfaces. Rubbed PI surfaces have suitable characteristics, such as uniform alignment. However, the rubbing method has some drawbacks, such as the generation of electrostatic charges and the creation of contaminating particles. Thus, we strongly recommend a non contact alignment technique for future generations of large high-resolution LCDs. Most recently, the LC aligning capabilities achieved by ultraviolet and ion-beam exposures which are non contact methods, on diamond-like carbon (DLC) inorganic thin film layers have been successfully studied because DLC thin films have a high mechanical hardness, a high electrical resistivity, optical transparency, and chemical inertness. In addition, nitrogen-doped DLC (NDLC) thin films exhibit properties similar to those of the DLC thin films and a higher thermal stability than the DLC thin films because C:N bonding in the NDLC thin filmsis stronger against thermal stress than C:H bonding in the DLC thin films. Our research group has already studied the NDLC thin films by an ion-beam alignment method. The $SiN_x$ thin films deposited by plasma-enhanced chemical vapor deposition are widely used as an insulation layer for a thin film transistor, which has characteristics similar to those of DLC inorganic thin films. Therefore, in this paper, we report on LC alignment effects and pretilt angle generation on a $SiN_x$, thin film treated by ion-beam irradiation for various N ratios

• 전자공학회논문지 IE
• /
• 제43권4호
• /
• pp.99-104
• /
• 2006

전기 전자 소자를 제작하는 방법으로 Langmuir-Boldgett(LB)법이 많은 관심을 받고 있다. 수면위에 형성된 단분자막을 압축 또는 확장하면, 분자가 배향하는 과정에서 맥스웰 변위전류(MDC)가 흐른다. MDC는 전속밀도의 변화에 기인해서 흐르므로 MDC를 측정하는 것에 의해 분자의 동적 거동 관찰할 수 있다. 단분자막을 압축하는 속도와 분자면적은 서로 선형적인 관계를 갖고 있다. 본 연구에서는 압축속도를 30, 40, 50mm/min으로 달리하여 단분자막의 동적 거동을 관찰하였으며 LB법을 이용하여 Arachidic acid 단분자를 slide glass 위에 Y-type으로 9$\sim$21층의 다층막을 누적하여 Au/Arachidic acid/Al 소자를 제작하였다. 또한 Metal-Insulator-Metal(MIM) 소자의 I-V 특성을 측정하여 전극간의 거리가 커질수록 절연특성이 좋아짐을 확인하였다.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.26-30
• /
• 2013

The purpose of this study is to find risk factors by analyzing the operation principle of a photo coupler (P/C) used to remove the noise of electronic devices and establish a base for the performance improvement of developed products. It was found from the P/C circuit analysis of normal products that they were equipped with an electrolytic condenser of $0.1{\mu}F$ to smooth system signals. Due to the epoxy resin packing the external part of the P/C, this study experienced a limit to visually examine the damage to it. It could be seen from the analysis of electric characteristics of the P/C that the forward voltage ($V_f$) and reverse current ($I_r$) were 1.3 V and 10 uA, respectively. In addition, it is required that the breakdown voltage (VCE) between the collector (C) and emitter (E) be maintained at less than 35 V. The and of the damaged product #1 were comparatively good. However, the measurement of was 100.0 uA. From this, it is thought that a short circuit occurred to the internal circuit. Moreover, from the fact that the of the damaged product #2 was open circuit and the measurement of was 0.0 uA, it is thought that the collector and emitter was separated or insulation resistance was significantly high. Furthermore, from the fact that the of the damaged product #3 was open circuit and the measurement of was 0.0 uA, it is thought that the space between the collector (C) and emitter (E) failed to meet the design standard or that they were separated. Therefore, it is thought that fabricating the P/C by increasing the reverse current 10 mA to 50 mA will prevent its malfunction.

• 한국전기전자재료학회논문지
• /
• 제33권1호
• /
• pp.56-59
• /
• 2020

Porcelain insulators are typically exposed to surface discharge and lightning impulse in service. This study investigates the insulation characteristics of the external and internal discharges of a porcelain insulator with respect to its flashover for a 154 kV transmission line. The experiments are also conducted using a wet flashover test and an impulse test based on the external discharge and the internal penetration, to classify the flashover voltage-time curve of the porcelain insulator. When an impulse with a strength of 2,500 kV/㎲ was applied three times to 6.5 mm ceramic samples, electrical penetration of approximately 70% occurred. The impulse experiment confirmed that the electrical penetration inside the porcelain insulator coincided with the area where the electric field was concentrated. The wet flashover voltage test revealed that the flashover threshold voltage increases by approximately 7% after cleaning of the surface.

• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.600-607
• /
• 2018

Polypropylene fibers, while having many advantages such as light weight, sweat fast drying, water-repellent, drainage, thermal insulation, anti-static property has a drawback in dyeing. In recent years, the development of dyeable polypropylene fibers has expanded its value in the textile market. The purpose of this study is to fabricate composite spun yarns using polypropylene, acrylic, rayon and wool and to analyze tensile properties, uniformity characteristics, bending properties, hairiness, and surface shape according to the degree of fineness and blended ratio. The specimens consisted of 100% polypropylene spun yarn pp30, pp40 and ppa(pp/acrylic), ppr(pp/rayon), ppw(pp/wool), 5 altogether sed in this study. The results of the study are as follows. The breaking strength of polypropylene spun yarn blended with rayon and acrylic was higher than that of 100% polypropylene spun yarn. The polypropylene spun yarn is higher the fineness been shown to decrease the breaking strength and elongation. The bending properties of polypropylene spun yarns were in the order of ppa>ppr>pp40>pp30>ppw. The unevenness of ppw, ppr, and ppa was higher than pp40 and pp30. With the exception of ppw with crimp properties, pp30 and pp40 were found to have a hairiness index greater than ppr, ppa. In the microscopic photographs of polypropylene spun yarn, pp30, which had the highest hairiness index, was found to have a thick yarn and a large number of hairs, and ppw had hairs of 3 mm or more protruding elongated outwardly.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.384-384
• /
• 2009

에폭시 수지에 유기화된 층상실리케이트 나노입자를 1wt% 충진한 경우 나노콤포지트와 마이크로 입자를 50wt% 충진한 경우 마이크로 콤포지트를 제조하였다. 초음파 분산법을 이용하여 나노 및 마이크로입자를 120분 동안 분산시킨 에폭시- 나노/마이크로 콤포지트이다. 나노콤포지트와 마이크로콤포지트의 단시간 교류절연파괴특성을 조사하기 위해 와이블 분포 plot을 통하여 나타내었다. 와이블 plot은 기울기로서 형상파라미터를 나타낸 경우로서 이는 파괴강도의 균질성을 의미하게 된다. 63.2% 누적분포함수를 나타낸 경우 척도파라미터로서 나타내어진다. 마이크로 콤포지트의 경우 형상파라미터가 2.99, 나노콤포지트는 8.96를 나타내었다. 또한 마이크로 콤포지트 및 나노콤포지트 스케일 파라미터는 164.25kV/mm, 245kV/mm를 얻었다. 또한 B10수명의 경우 마이크로콤포지트와 나노콤포지트의 경우 77.57kV/mm, 139.3 6kV/mm로서 나노콤포지트의 경우 완전하게 박리가 일어난 경우이다. 마이크로 입자를 분산시켜 입자간거리와 나노입자를 분산시켜 박리가 일어난 경우 입자간거리는 대단히 큰 차이를 나타내고 있다. 나노입자가 교번전계 하에서 주입된 전하 및 케리어 이동을 억제하는 경우로 이와같은 결과를 얻을 수 있다.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.128-135
• /
• 2012

ALC는 경량이며 단열 및 차열 등의 성능이 우수한 반면 낮은 강도로 인한 모서리부의 취성파괴가 발생하기 쉬우므로 운반 및 취급 시 상당한 주의를 요구한다. 본 연구에서는 ALC의 물리적 성능개선을 위해 메타카올린 및 실리카퓸 등의 혼화재나 규석 분말 및 석고의 혼입율을 조절하여 제조한 ALC의 성능을 평가하였다. 연구결과 메타카올린이나 규석 분말의 혼입율이 18%인 경우 강도의 개선이 현저하였다. 이와 같은 결과는 공극의 충전효과에 의한 것으로 강도는 개선되나 밀도가 증가하므로 밀도를 낮추면서 강도를 개선할 수 있는 배합이나 제조법에 대한 연구가 필요하다.

• 공업화학
• /
• 제9권1호
• /
• pp.58-65
• /
• 1998

에폭시계 분체도료에 사용되고 있는 경화제로는 치환 dicyandiamide(Sub-DICY), 촉진 dicyandiamide(Acc-DICY), trimellitic anhydride(TMA), pyromellitic dianhydride(PMDA), Phenolic curing agent(Ph.C.A.)등이 사용되고 있다. 본 연구는 상기 5가지의 에폭시 경화제를 사용해서 제조한 에폭시 분체도료를 적합한 경화조건에서 완전히 경화시킨 뒤 여러 가지 실험기기 및 분석기기를 이용해서 경화된 도막 $T_g$, 인장강도, 파단신율, 경도, 내마모성등의 기계적 물성을 측정하였다. 그리고 흡수율, 내산성, 내알카리성등의 화학적물성, 전기적특성, 방식성등을 측정함으로써 경화제의 종류에 따른 에폭시 도막의 화학구조가 도막의 물성에 미치는 영향을 비교하였다. 그 결과 Phenolic curing agent는 toughness가 우수하지만 온도에 따른 색상 변화가 크고 산무수물 경화제는 전기절연성과 온도에 따른 색상안정성이 우수하지만 toughness와 부착성이 부족하고 DICY계는 흡수율과 온도에 따른 색상변화가 큰 특성을 나타내었다.

• 한국항공우주학회지
• /
• 제41권11호
• /
• pp.921-930
• /
• 2013

(주)쎄트렉아이는 고해상도 전자광학카메라인 EOS-D Ver.1.0의 개발 및 검증을 성공적으로 완료하였다. EOS-D Ver.1.0 시스템은 기존 EOS-C 계열 대비 향상된 공간 해상도 및 방사학적 해상도를 갖도록 설계되었다. EOS-D Ver.1.0의 열제어계는 능동 열제어 방식과 수동 열제어 방식을 혼용하여 개발되었다. 또한, 광학계 주구조물의 수분 발산 효과에 의한 비정렬 상태를 보상할 수 있도록 초점 조절장치(refocusing mechanism)를 설계하고 이를 검증하였다. 설계를 바탕으로 실제 모델을 제작, 인증 수준의 열진공 시험을 통해 설계 여유(design margin)와 작업도(workmanship)를 확인하였다. 또한 열-수치 모델(TMM)에 대한 검증 작업을 수행하여 해석 모델이 실제 모델의 열적 특성을 잘 모사하고 있음을 확인하였다.

• 한국가구학회지
• /
• 제22권1호
• /
• pp.63-71
• /
• 2011

Hanji has known for its high qualities for more than thousand years. Hanji is stronger, and has better durability, air permeability, flexibility, thermal insulation, soundproofs and UV absorbability. Therefore, developing industrial interior finishing materials using Hanji is replaced with the PVC (Poly-Vinyl Chloride) materials instead, it will be a new environment-friendly material and positively represents Korean brand marketing. The industrial inter-construction material is discomposed by heat or light because of material characteristics. As a result, it emits a lot of noxious substances. Hanji is essentially a neutral paper since it does not rely on any acidic chemicals of artificial bleaching methods. Hanji is also known as the living paper because of its close relation to nature. Therefore, I would like to suggest that Hanji made from alternative material as a chicken fiber. It will be a non-polluting interior finishing materials by making use of Hanji to a taste of Korean culture in the green industry around the world. Rather than PVC used commonly in construction material, kitchen and office furniture, interior materials in the subway, trains, or other vessels, credit cards, and ID cards, I created an interior construction material by using patented Hanji. This will be increased the value of usefulness in the environment-friendly green industry instead of PVC.