• 제목/요약/키워드: Instrument failure

검색결과 99건 처리시간 0.02초

Early dropout predictive factors in obesity treatment

  • Michelini, Ilaria;Falchi, Anna Giulia;Muggia, Chiara;Grecchi, Ilaria;Montagna, Elisabetta;De Silvestri, Annalisa;Tinelli, Carmine
    • Nutrition Research and Practice
    • /
    • 제8권1호
    • /
    • pp.94-102
    • /
    • 2014
  • Diet attrition and failure of long term treatment are very frequent in obese patients. This study aimed to identify pre-treatment variables determining dropout and to customise the characteristics of those most likely to abandon the program before treatment, thus making it possible to modify the therapy to increase compliance. A total of 146 outpatients were consecutively enrolled; 73 patients followed a prescriptive diet while 73 followed a novel brief group Cognitive Behavioural Treatment (CBT) in addition to prescriptive diet. The two interventions lasted for six months. Anthropometric, demographic, psychological parameters and feeding behaviour were assessed, the last two with the Italian instrument VCAO Ansisa; than, a semi-structured interview was performed on motivation to lose weight. To identify the baseline dropout risk factors among these parameters, univariate and multivariate logistic models were used. Comparison of the results in the two different treatments showed a higher attrition rate in CBT group, despite no statistically significant difference between the two treatment arms (P = 0.127). Dropout patients did not differ significantly from those who did not dropout with regards to sex, age, Body Mass Index (BMI), history of cycling, education, work and marriage. Regardless of weight loss, the most important factor that determines the dropout appears to be a high level of stress revealed by General Health Questionnaire-28 items (GHQ-28) score within VCAO test. The identification of hindering factors during the assessment is fundamental to reduce the dropout risk. For subjects at risk, it would be useful to dedicate a stress management program before beginning a dietary restriction.

GT Rotary Ni-Ti file과 함께 사용한 구동용 Ni-Ti file의 근관 성형력 비교에 대한 연구 (Shaping ability of Ni-Ti Rotary files in combination with GT Rotary Ni-Ti file)

  • 신동렬;박상진;최기운
    • Restorative Dentistry and Endodontics
    • /
    • 제27권2호
    • /
    • pp.196-206
    • /
    • 2002
  • 본 연구는 근관의 치관부는 GT Rotary file을 이용하여 성형하고, 근단부는 K-Flexofile, ProFile .04, Lightspeed, HERO642 file로 성형하여 근관용 file의 근관성형력을 비교하는 것이다. 실험 표본으로는 resin simulated root canal blocks(Dentsply, Swiss)를 이용하였고 4개의 군으로 분류하여 실험을 실시하였다. 모든 resin block을 GT Rotary file(Dentsply, Swiss)을 이용하여 치관부를 형성한 후 근단부는 K-Flexofile(Dentsply, Swiss), ProFile .04 taper file(Denstply. Swiss), Lightspeed file(Lightspeed Tech., USA), HERO642 file(Micromega, France)로 ISO size #35까지 형성하였다. 성형 후 preparation time과 instrument failure를 측정하였고 최종 사용한 file을 resin block 내에 재위치시켜 working length의 변화량을 0.5mm 단위로 측정하였다. Resin debris에 의한 canal blockage를 조사하였으며, 근관 내의 인상을 채득하여 canal form을 평가하였다. 성형 전과 성형 후의 사진을 촬영하고 computer software를 이용하여 중첩시킨 후 canal aberration, canal transportation을 평가하여 다음과 같은 결과를 얻었다. 1. Preparation time, working length의 변화량, canal blockage, canal aberration, canal transportation에 있어서 Ni-Ti file이 stainless steel file에 비하여 우수하였다(p<0.05). 반면에 근관성형력에 있어서 canal form과 canal transportation을 제외하고는 세 Ni-Ti file 사이에는 유의차가 없었다(p>0.05). 2. Canal form 중 taper에 있어서 Lightspeed는 적절하지 못한 taper를 보여주었다(p<0.05). 3. Canal transportation에 있어서 Lightspeed 군과 HER0642 군이 K-Flexofile 군과 ProFile .04 군에 비해 적게 나타났고(p<0.05), 특히 만곡의 끝 부분에서는 Lightspeed 군이 가장 적게 나타났다(p<0.05). 이상과 같은 연구결과로 보아 부적절한 taper를 지니고 있던 Lightspeed fie과 HERO642 file 중 HERO642 file은 GT Rotary file과 함께 사용함으로써 적절한 taper로 형성할 수 있었으나 Lightspeed file은 효과적이지 못하였으므로 적절한 taper를 형성하기 위한 file이 치근의 중간부를 형성하기 위해 필요함이 확인되었다.

MIRIS 충격시험에서의 광학계 안정성 확보를 위한 연구 (RESEARCH FOR ROBUSTNESS OF THE MIRIS OPTICAL COMPONENTS IN THE SHOCK ENVIRONMENT TEST)

  • 문봉곤;;박성준;박귀종;이대희;정웅섭;박영식;표정현;남욱원;이덕행;이승우;;한원용
    • 천문학논총
    • /
    • 제27권3호
    • /
    • pp.39-47
    • /
    • 2012
  • MIRIS, Multi-purpose Infra-Red Imaging System, is the main payload of STSAT-3 (Korea Science & Technology Satellite 3), which will be launched in the end of 2012 (the exact date to be determined) by a Russian Dnepr rocket. MIRIS consists of two camera systems, SOC (Space Observation Camera) and EOC (Earth Observation Camera). During a shock test for the flight model stability in the launching environment, some lenses of SOC EQM (Engineering Qualification Model) were broken. In order to resolve the lens failure, analyses for cause were performed with visual inspections for lenses and opto-mechanical parts. After modifications of SOC opto-mechanical parts, the shock test was performed again and passed. In this paper, we introduce the solution for lens safety and report the test results.

Hall 센서를 이용한 엘리베이터 와이어 로프의 비파괴 검출시스템의 개발 (Development of Nondestructive Detecting System for Elevator Wire Ropes using Hall-effect Sensors)

  • 김성덕
    • 센서학회지
    • /
    • 제10권1호
    • /
    • pp.33-41
    • /
    • 2001
  • 와이어 로프는 무거운 중량을 안전하게 운반하거나 기계적인 에너지를 빠르게 전송하는 곳과 같은 산업응용 분야에 광범위하게 사용되어 왔다. 특히, 운전 중 엘리베이터의 와이어 로프가 파손되면 큰 재산 상 손실과 주변 인명의 심각한 상해를 초래할 수 있다. 따라서, 와이어 로프의 정기적인 검사는 매우 중요하다. 와이어 로프의 고장 검출은 로프의 구조, 특성, 결함 특성, 검출방법과 신호처리 방법에 대한 기본적인 이해가 요구된다. 이 연구에서는 엘리베이터에 노화된 와이어 로프에 대한 마모, 단선, 부식과 형붕괴와 같은 결함을 검출하기 위하여, Hall 센서를 결합한 새로운 결함 검출시스템의 개발에 대하여 다룬다. 휴대용 계측기로서 검출기를 사용하기 위하여, Hall 센서를 가진 센싱 부분과 아날로그 신호처리 및 프로그램의 제작에 대한 몇 가지 특성들이 서술되었다. 제작된 검출시스템에 대한 실험과 실장시험 결과 역시 제시되었다. 그 결과, 검출시스템은 사용 중인 노화된 와이어 로프의 결함을 검출하는데 양호한 효율성을 갖는다는 것을 확인하였다.

  • PDF

자연공조를 활용한 무선기지국 Energy절감 제어시스템 (Energy saving control system of wireless base station utilizing natural air-conditioning)

  • 류구환;권창희
    • 디지털융복합연구
    • /
    • 제17권10호
    • /
    • pp.223-232
    • /
    • 2019
  • 정보통신 산업 발전에 따라 통신장치의 크기는 소형화 되고 발열량이 많이 발생하는 시스템으로 변화하고 있다. 그러므로 무선기지국에는 무선장비의 발열량이 많이 발생하여 에너지가 계속 많이 소모되고 있고 그로 인하여 무선기지국의 장애가 발생 할 우려가 있어 본 연구에서는 효율적이고 효과적인 방법으로 무선기지국내 에너지를 절감하고 기지국운영을 위하여 본 연구를 분석하게 되었다. 연구방법으로는 발열량 및 전기료를 많이 발생하는 기지국 대상으로 실시하였고 기지국 25개를 선정하여 2주간 데이터를 확보 하였다. 신뢰성을 확보하기 위해 실내 온도를 일정하게 $27^{\circ}C$로 유지 하였으며, 제어시스템을 설치하여 2주간 똑 같이 설치하여 date를 분석 확보 하였다. 연구방법에 있어 시험결과를 산출하기 위해 계측기는 전산전력계, 디지털온도계, 분진측정 등이 활용하였다. date분석을 위해 Control Sysetm 설치 전 date와 설치 후 date 분석을 위해 25개 무선기지국대상으로 연구 시험 하였다.

Comparative analysis of torsional and cyclic fatigue resistance of ProGlider, WaveOne Gold Glider, and TruNatomy Glider in simulated curved canal

  • Pedro de Souza Dias;Augusto Shoji Kato;Carlos Eduardo da Silveira Bueno;Rodrigo Ricci Vivan;Marco Antonio Hungaro Duarte ;Pedro Henrique Souza Calefi ;Rina Andrea Pelegrine
    • Restorative Dentistry and Endodontics
    • /
    • 제48권1호
    • /
    • pp.4.1-4.10
    • /
    • 2023
  • Objectives: This study aimed to compare the torsional and cyclic fatigue resistance of ProGlider (PG), WaveOne Gold Glider (WGG), and TruNatomy Glider (TNG). Materials and Methods: A total of 15 instruments of each glide path system (n = 15) were used for each test. A custom-made device simulating an angle of 90° and a radius of 5 millimeters was used to assess cyclic fatigue resistance, with calculation of number of cycles to failure. Torsional fatigue resistance was assessed by maximum torque and angle of rotation. Fractured instruments were examined by scanning electron microscopy (SEM). Data were analyzed with Shapiro-Wilk and Kruskal-Wallis tests, and the significance level was set at 5%. Results: The WGG group showed greater cyclic fatigue resistance than the PG and TNG groups (p < 0.05). In the torsional fatigue test, the TNG group showed a higher angle of rotation, followed by the PG and WGG groups (p < 0.05). The TNG group was superior to the PG group in torsional resistance (p < 0.05). SEM analysis revealed ductile morphology, typical of the 2 fracture modes: cyclic fatigue and torsional fatigue. Conclusions: Reciprocating WGG instruments showed greater cyclic fatigue resistance, while TNG instruments were better in torsional fatigue resistance. The significance of these findings lies in the identification of the instruments' clinical applicability to guide the choice of the most appropriate instrument and enable the clinician to provide a more predictable glide path preparation.

Effectiveness and safety of rotary and reciprocating kinematics for retreatment of curved root canals: a systematic review of in vitro studies

  • Lucas Pinho Simoes;Alexandre Henrique dos Reis-Prado;Carlos Roberto Emerenciano Bueno;Ana Cecília Diniz Viana ;Marco Antonio Hungaro Duarte ;Luciano Tavares Angelo Cintra;Cleidiel Aparecido Araujo Lemos;Francine Benetti
    • Restorative Dentistry and Endodontics
    • /
    • 제47권2호
    • /
    • pp.22.1-22.18
    • /
    • 2022
  • Objectives: This systematic review (register-osf.io/wg7ba) compared the efficacy and safety of rotary and reciprocating kinematics in the removal of filling material from curved root canals. Materials and Methods: Only in vitro studies evaluating both kinematics during retreatment were included. A systematic search (PubMed/MEDLINE, Scopus, and other databases, until January 2021), data extraction, and risk of bias analysis (Joanna Briggs Institute checklist) were performed. Efficacy in filling removal was the primary outcome. Results: The search resulted in 2,795 studies, of which 15 were included. Efficacy was measured in terms of the remaining filling material and the time required for this. Nine studies evaluated filling material removal, of which 7 found no significant differences between rotary and reciprocating kinematics. Regarding the time for filling removal, 5 studies showed no difference between both kinematics, 2 studies showed faster results with rotary systems, and other 2 showed the opposite. No significant differences were found in apical transportation, centering ability, instrument failure, dentin removed and extruded debris. A low risk of bias was observed. Conclusions: This review suggests that the choice of rotary or reciprocating kinematics does not influence the efficacy of filling removal from curved root canals. Further studies are needed to compare the kinematics safety in curved root canals.

국내 하중계 성능검증과 신뢰성 시험 연구 (Performance Verification and Reliability Test of Load Cell Gauge in Korea)

  • 김영배;박영배;이성원;이강일
    • 한국지반공학회논문집
    • /
    • 제39권12호
    • /
    • pp.103-114
    • /
    • 2023
  • 흙막이 현장에서 계측은 굴착으로 인한 지보재와 지반의 안정성 확인을 위해 필수적으로 수행해야 하는 중요한 요소이다. 특히, 굴착지반에서 전달되는 버팀대의 하중 전달 추이를 확인하는 하중계는 정확도 유지가 필수적이다. 그러나, 건설 현장에서는 하중계의 정확도를 파악할 수 있는 검증 방법, 규정 등의 연구가 부족하여 제대로 된 성능검사 없이 설치됨에 따라 문제가 되고 있다. 본 연구에서는 국내 현장에 사용되는 하중계를 전수조사하여 성능검사를 실시하고 외국 제품과의 비교를 통해 불량 원인을 파악하였다. 하중계의 성능검증을 통해 성능검사 기준을 제시하였으므로 본 연구 결과는 신뢰성 높은 하중계를 선택하는 데 도움이 될 것으로 판단된다.

최근국제항공보안대책(最近國際航空保安対策)의 제간제(諸間題) -특히 법적측면(法的測面)을 중심(中心)으로- (Some New Problems of International Aviation Security- Considerations Forcused on its Legal Aspects)

  • 최완식
    • 항공우주정책ㆍ법학회지
    • /
    • 제5권
    • /
    • pp.53-75
    • /
    • 1993
  • This article is concerned with the comment on "Some New Problems of International Aviation Security-Considerations Forcused on its Legal Aspects". Ever since 1970, in addition to the problem of failure to accept the Tokyo, Hague and Montreal Conventions, there has been also the problem of parties to them, failing to comply with their obligations under the respective treaties, in the form especially of nominal penalties or the lack of any effort to prosecute after blank refusals to extradite. There have also been cases of prolonged detention of aircraft, passengers and hostages. In this regard, all three conventions contain identical clauses which submit disputes between two or more contracting States concerning the interpretation or application of the respective conventions to arbitration or failing agreement on the organization of the arbitration, to the International Court of Justice. To the extent to which contracting States have not contracted out of this undertaking, as I fear they are expressly allowed to do, this promision can be used by contracting States to ensure compliance. But to date, this avenue does not appear to have been used. From this point of view, it may be worth mentioning that there appears to be an alarming trend towards the view that the defeat of terrorism is such an overriding imperative that all means of doing so become, in international law, automatically lawful. In addition, in as far as aviation security is concerned, as in fact it has long been suggested, what is required is the "application of the strictest security measures by all concerned."In this regard, mention should be made of Annex 17 to the Chicago Convention on Security-Safeguarding International Civil Aviation against Acts of Unlawful Intereference. ICAO has, moreover, compiled, for restricted distribution, a Security Manual for Safeguarding Civil Aviation Against Acts of Unlawful Interference, which is highly useful. In this regard, it may well be argued that, unless States members of ICAO notify the ICAO Council of their inability to comply with opecific standards in Annex 17 or any of the related Annexes in accordance with Article 38 of the 1944 Chicago Convention on International Civil Aviation, their failure to do so can involve State responsibility and, if damage were to insure, their liability. The same applies to breaches of any other treaty obligation. I hope to demonstrate that although modes of international violence may change, their underlying characteristics remain broadly similar, necessitating not simply the adoption of an adequate body of domestic legislation, firm in its content and fairly administered, but also an international network of communication, of cooperation and of coordination of policies. Afurther legal instrument is now being developed by the Legal Committee of ICAO with respect to unlawful acts at International airports. These instruments, however, are not very effective, because of the absence of universal acceptance and the deficiency I have already pointed out. Therefore, States, airports and international airlines have to concentrate on prevention. If the development of policies is important at the international level, it is equally important in the domestic setting. For example, the recent experiences of France have prompted many changes in the State's legislation and in its policies towards terrorism, with higher penalties for terrorist offences and incentives which encourage accused terrorists to pass informations to the authorities. And our government has to tighten furthermore security measures. Particularly, in the case an unarmed hijacker who boards having no instrument in his possession with which to promote the hoax, a plaintiff-passenger would be hard-pressed to show that the airline was negligent in screening the hijacker prior to boarding. In light of the airline's duty to exercise a high degree of care to provide for the safety of all the passengers on board, an acquiescence to a hijacker's demands on the part of the air carrier could constitute a breach of duty only when it is clearly shown that the carrier's employees knew or plainly should have known that the hijacker was unarmed. The general opinion is that the legal oystem could be sufficient, provided that the political will is there to use and apply it effectively. All agreed that the main responsibility for security has to be borne by the governments. A state that supports aviation terrorism is responsible for violation of International Aviation Law. Generally speaking, terrorism is a violation of international law. It violates the sovereign rights of states, and the human rights of the individuals. We have to contribute more to the creation of a general consensus amongst all states about the need to combat the threat of aviation terrorism. I think that aviation terrorism as becoming an ever more serious issue, has to be solved by internationally agreed and closely co - ordinated measures.

  • PDF

Fractographic 분석을 통한 HEROShaper 니켈티타늄 전동 파일의 피로파절에 미치는 표면결함의 역할 (The Effect of Surface Defects on the Cyclic Fatigue Fracture of HEROShaper Ni-Ti rotary files in a Dynamic Model: A Fractographic Analysis)

  • 이정규;김의성;강명희;금기연
    • Restorative Dentistry and Endodontics
    • /
    • 제32권2호
    • /
    • pp.130-137
    • /
    • 2007
  • 본 연구의 목적은 니켈티타늄 전동파일의 피로파절에 있어서 표면 결함의 역할을 규명하고자 fatigue tester에서 반복적 인 fatigue force를 부여한 후 파절된 단면을 주사전자현미 경으로 관찰하여 파절 역학을 규명하는 것이다. 총 45개의 #30/.04 taper와 21 mm의 HEROShaper 니켈-티타늄 전동파일을 15개씩 3개의 군으로 분류하였다. 제 1군은 결함이 없는 새 HEROShaper파일, 제 2군은 제조과정에서 metal rollover나 machining marks와 같은 표면결함을 갖는 HEROShaper파일, 제 3군은 임상에서 4- 6개의 구치부 근관의 확대에 사용한 HEROShaper 파일을 사용하였다. 모든 파일들은 회전속도(300 rpm)와 pecking distance (3 mm)가 일정하게 맞춘 fatigue tester에서 파절될 때까지 시간을 측정한 후 통계분석을 통해 각 군간의 유의성을 분석하였고, 파절 단면의 farctographic analysis를 통해 파절역학을 규명하고자 하였다 실험결과 평균 파절시간에 있어서 group 1과 2, group 1과 3사이에는 통계학적으로 유의할 만한 차이가 있었으나 (p<0.05), group 2와 3사이에는 통계학적인 차이가 없었다. Fractographic analysis 결과 대부분의 파절면에서 microvoid와 dimple 소견을 갖는 ductile fracture양상이 관찰되었다. 또한 brittle fracture가 일어난 파절면에서는 파절선 전방에 수 많은 striation들이 관찰되었고 transgranular 및 intergranular cleavage 소견도 보였다. 표면결함이 있는 제 2, 3 군의 파절단면에서는 모든 시편에서 표면결함이 관찰되었다. 이와 같은 결과로 미루어 보아 표면결함이 반복 피로파절에서 미세균열의 기시점으로 중요한 역할을 하며 fractography분석법은 Ni-Ti 파일의 파절역학을 규명하는데 유용함을 알 수 있었다.