• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.2
• /
• pp.85-96
• /
• 2008

One of the typical methods to prevent tampering and reverse engineering on executable codes is to encrypt them. This paper proposes a code block cipher method based on key chaining to encrypt the code. The block cipher by key chaining has been known to be inadequate for encrypting the code with control transfer, even though the key chaining has advantage of hiding the keys in blocks and making the individual keys different from block to block. This paper proposes a block transformation and duplication method to apply the block cipher by key chaining to the executable codes with control transfer instructions, and shows the idea works with the MIPS instruction set.

• Journal of IKEEE
• /
• v.12 no.4
• /
• pp.246-254
• /
• 2008

This paper represents a design of a 4 way SIMD processor with multi-thread and dual phase instruction pipeline. 8 threads can be performing in round-robin order, so any hazards can’t occur. The dual phase pipeline makes a pipeline operate as two pipelines, and it can fetch maximum 4 unit instructions at once. This variable length instruction set divide into first phase and second phase instructions, and with this function, complex branch and addressing can be executed at one clock cycle. This processor reduces the code size to quarter, pull out the doubled performance improvement than normal SIMD architecture.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.11
• /
• pp.1-10
• /
• 2012

In this paper, the extension of the addressing mode in the 16-bit Thumb instruction set architecture is proposed to improve the performance of 16-bit Thumb code. The key idea of the proposed approach is the introduction of new addressing modes for more frequent instructions by using the saved bits from the reduction of the register fields in less frequently used instructions. The proposed approach adopts efficient addressing modes from the 32-bit ARM architecture, which is the superset of the 16-bit Thumb architecture. To speed up access to a data list, scaled register offset addressing mode and post-indexed addressing mode are introduced for load and store instructions. Experiments show that the proposed approach improves performance by an average of 8.5% when compared to the conventional approach.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.228-241
• /
• 1997

In this paper, we present a design of modem and vocoder digital signal processor (DSP) chips for CDMA mobile station. The modem chip integrates CDMA reverse link modulator, CDMA forward link demodulator and Viterbi decoder. This chip contains 89,000 gates and 29 kbit RAMs, and the chip size is $10 mm{\times}10.1 mm$ which is fabricated using a $0.8{\mu}m$ 2 metal CMOs technology. To carry out the system-level simulation, models of the base station modulator, the fading channel, the automatic gain control loop, and the microcontroller were developed and interfaced with a gate-level description of the modem application specific integrated circuit (ASIC). The Modem chip is now successfully working in the real CDMA mobile station on its first fab-out. A new DSP architecture was designed to implement the Qualcomm code exited linear prediction (QCELP) vocoder algorithm in an efficient way. The 16 bit vocoder DSP chip has an architecture which supports direct and immediate addressing modes in one instruction cycle, combined with a RISC-type instruction set. This turns out to be effective for the implementation of vocoder algorithm in terms of performance and power consumption. The implementation of QCELP algorithm in our DSP requires only 28 million instruction per second (MIPS) of computation and 290 mW of power consumption. The DSP chip contains 32,000 gates, 32K ($2k{\times}16\;bit$) RAM, and 240k ($10k{\times}24\;bit$) ROM. The die size is $8.7\;mm{\times}8.3\;mm$ and chip is fabricated using $0.8\;{\mu}m$ CMOS technology.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.497-511
• /
• 1999

Recently, many parallel processing technologies were developed, ILP(Instruction level Parallelism) processor's performance have been growed very rapidly. especially, EPIC(Explicitly Parallel Instruction computing) architectures attempt to enhance the performance in the predicated execution and speculative execution with the hardware. In this paper to improve the code scheduling possibility by applying to the characteristics of EPIC architectures, a new register allocation algorithm is proposed. And we proves that proposed register allocation algorithm is more efficient scheme than the conventional scheme when predicated execution is applied to our scheme by experiments. In experimental results, it shows much more performance enhancement, about 19% in proposed scheme than the conventional scheme. So, our scheme is verified that it is an effective register allocation method.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.113-128
• /
• 2008

Turbo codes are extensively used in current communications standards and have a promising outlook for future generations. The advantages of software defined radio, especially dynamic reconfiguration, make it very attractive in this multi-standard scenario. However, the complex and power consuming implementation of the maximum a posteriori (MAP) algorithm, employed by turbo decoders, sets hurdles to this goal. This work introduces an ASIP architecture for the MAP algorithm, based on a dual-clustered VLIW processor. It displays the good performance of application specific designs along with the versatility of processors, which makes it compliant with leading edge standards. The machine deals with multi-operand instructions in an innovative way, the fetching and assertion of data is serialized and the addressing is automatized and transparent for the programmer. The performance-area trade-off of the proposed architecture achieves a throughput of 8 cycles per symbol with very low power dissipation.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.131-135
• /
• 2000

본 논문에서는 고성능 고정 소수점 DSP (Digital Signal Processor) 코어인 Vincent6 코어 [1]를 이용하여 ITU-T C.728 음성 부호화기를 실시간으로 구현하였다 G.728 은 16 kb/s전송률의 ITU-T표준 음성 부호화기이며, 입력신호는 8 kHz로 샘플링되며 샘플 당 16 bit 로 양자화된 PCM 신호이다. G.728 은 LD-CELP(Low Delay Code Excited Linear Prediction)라고도 하며, 알고리 듬 delay는 0.625ms 이다. Vincent6 DSP core 는 VLIW (Very-Long Instruction Word) 특성을 가지므로 다중 명령 (multiple instruction)을 수행할 수 있다 이를 위해서 G.728 annex G를 이용하여 고정 소숫점 연산으로 코드를 작성한 후, 이를 vincent6 어셈블리 코드로 구현하였다. 최종적으로 구현된 코드는 ITU-T 의 test vector 에 대 해 bit exact 한 결과를 보이며 34 MCPS (Million Cycles Per Second)의 계산량을 가지며 사용 메모리크기는 데이터 메모리가 약 9KByte, 프로그램 메모리가 약 57 KByte 이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1332-1339
• /
• 2001

SoC(System on Chip) technology is widely used in the field of embedded systems by providing high flexibility for a specific application domain. An important aspect of development any new embedded system is verification which usually requires lengthy software and hardware co-design. To reduce development cost of design effort, the instruction set of microprocessor must be suitable for a high level language compiler. And FPGA prototype system could be derived and tested for design verification. In this paper, we propose a 16 bit FPGA microprocessor, which is tentatively-named EISC16, based on an EISC(Extendable Instruction Set Computer) architecture for embedded applications. The proposed EISC16 has a 16 bit fixed length instruction set which has the short length offset and small immediate operand. A 16 bit offset and immediate operand could be extended using by an extension register and an extension flag. We developed a cross C/C++ compiler and development software of the EISC16 by porting GNU on an IBM-PC and SUN workstation and compared the object code size created after compiling a C/C. standard library, concluding that EISC16 exhibits a higher code density than existing 16 microprocessors. The proposed EISC16 requires approximately 6,000 gates when designed and synthesized with RTL level VHDL at Xilinix's Virtex XCV300 FPGA. And we design a test board which consists of EISC16 ROM, RAM, LED/LCD panel, periodic timer, input key pad and RS-232C controller. 11 works normally at 7MHz Clock.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.1
• /
• pp.71-75
• /
• 2008

Many sensor operating systems have memory limitation constraint; therefore, stack memory areas of threads resides in a single memory space. Because most target platforms do not have hardware MMY (Memory Management Unit), it is difficult to protect each stack area. The method to solve this problem is to exchange original stack handling instructions in binary code for wrapper routines to protect stack area. In this exchanging phase, instruction corruption problem occurs due to difference of each instruction length between stack handling instructions and branch instructions. In this paper, we propose the algorithm to call a target routine without instruction corruption problem. This algorithm can reach a target routine by repeating branch instructions to have a short range. Our solution makes it easy to apply security patch and maintain upgrade of software of sensor node.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.29-42
• /
• 1990

In this paper, We use the APL as IDL when simulation a 16-bit SIP. It was possible for IDL to represent and describe a structure of a H/W which other HDL have not. Because We partitioned whole system to various modules when desingning processor, We adpoted a direct decoding method. A designed each modules are executed according to 12-bit control word was inputed through experimental framework, Which were composed to symbolized instructions. In here, By setting instruction codes of the SIP using binary code, We composed instruction format and assembler instruction, and verified the SIP behaviour that try to implement by entering a presented instruction set through experimental framework. In a presented SIP, Because inputing program are a symbolized language, Designer and user will easily understand behaviour of system. Especially, Because we can immediatly specify a unit function within SIP, We will use variously and easily the library cell.