• 제목/요약/키워드: Instantaneous

검색결과 2,236건 처리시간 0.031초

장자와 칸트에 있어서 미 개념 : 실천미와 반성미 (The Concept of Beauty in Chuang-Tzu and Kant : The Practical Beauty and The Reflexive)

  • 노은임
    • 동양고전연구
    • /
    • 제34호
    • /
    • pp.339-362
    • /
    • 2009
  • 미 개념은 단정적으로 규정된 개념이 아니라, 새롭게 그 내포와 외연을 확장할 수 있는 유동적 개념이다. 이런 입장에서 미 개념을 자유 개념으로 정의하고자 한다. 자유는 바로 인간의 삶의 의미만큼이나 포괄적이고 전체적이며 유동적인 개념이다. 결국 미는 어떤 한 사람의 확정적인 정의에로 환원될 수 없다. 이런 맥락에서 필자는 칸트의 미학을 반성적 미학으로, 장자의 미학을 실천적 미학으로 특성화하면서 양자 미학의 유사와 차이를 동시에 해명하고자 한다. 양자의 미학의 차이는 칸트가 주관의 반성적 차원을 강조한다면, 장자는 자연 개념을 강조한다는 것에 있다. 그렇다고 양자가 서로 상반적인 미학을 구축한 것은 아니다. 즉 칸트의 미학은 선험적 방법을 사용하고, 장자의 미학은 좌망의 방법을 사용한다는 방법론적 차이에도 불구하고 양자는 다 같이 자유 개념을 미의 본질로 간주한다는 차원에서 공통의 지반 위에 서 있다. 그러나 자유에로 나아가는 방법은 동일하지 않다. 칸트가 무한한 의지의 선험적 자유를 강조한다면, 장자는 자연의 필연성을 인식하고 나의 자유의지의 환상을 자각하면서 자연에 순응할 것을 강조한다. 그러면서도 양자는 자연과 자유의 모순적 관계를 인정하고 동시에 극복을 시도한다. 그러나 자유에로 가는 비법에 관한 한 장자의 미학이 칸트의 미학보다 우위라고 생각된다.

잭업드릴링 리그의 레그와 작업 지원선 충돌에 의한 구조붕괴 거동 평가 (Assessment of the Structural Collapse Behavior of Between Offshore Supply Vessel and Leg in the Jack-up Drilling Rig)

  • 박주신;서정관
    • 해양환경안전학회지
    • /
    • 제28권4호
    • /
    • pp.601-609
    • /
    • 2022
  • 잭업드릴링 리그는 해양 석유와 가스 탐사 산업에서 널리 사용되는 모바일 해양 플랫폼이다. 그것은 시추 및 생산을 위한 캔틸레버 시추 장치가 있는 독립적인 3개의 다리가 있는 자체 승강식 장치이다. 전형적인 잭업리그는 삼각형 선체, 타워형 데릭, 캔틸레버, 잭케이스, 거주구와 다리로 구성되며 여기에는 스퍼드캔 구조, 개방형 트러스, X-교차 구조로 구성된다. 일반적으로 잭업리그는 수심 130m~170m에서만 운용이 되고 있다. 최근 들어 개발 유정이 심해로 이동하면서, 깊은 수심과 가혹한 환경조건을 만족해야 한다. 리그의 작업 상태에서 모든 정적, 동적 하중은 레그(Leg)를 통해서 지탱되는 특징이 있다. 이러한 리그의 중요한 이슈는 순간적으로 큰 충격에너지를 발생시키는 충돌에 대한 레그의 안전성이다. 본 연구에서는 LS-Dyna 프로그램을 이용하여 DNV 선급에서 규정하고 있는 충돌에너지 35MJ 요구사항에 대한 수치해석 및 검증을 수행하였다. 충돌 선박은 배수량 7,500톤 작업 지원선을 사용하였고, 5가지 충돌조건을 선정하였다. 해석결과로부터 모든 충돌조건은 선급 기준을 만족하지 못한다. 코드 방향 충돌조건은 충돌에너지 15MJ, 브레이스 충돌조건은 6MJ이 합리적이다. 따라서 충돌시나리오에 따른 합리적인 충돌에너지 기준의 제정이 필요로 하다.

Control of the flow past a sphere in a turbulent boundary layer using O-ring

  • Okbaz, Abdulkerim;Ozgoren, Muammer;Canpolat, Cetin;Sahin, Besir;Akilli, Huseyin
    • Wind and Structures
    • /
    • 제35권1호
    • /
    • pp.1-20
    • /
    • 2022
  • This research work presents an experimental study's outcomes to reveal the impact of an O-ring on the flow control over a sphere placed in a turbulent boundary layer. The investigation is performed quantitatively and qualitatively using particle image velocimetry (PIV) and dye visualization. The sphere model having a diamater of 42.5 mm is located in a turbulent boundary layer flow over a smooth plate for gap ratios of 0≤G/D≤1.5 at Reynolds number of 5 × 103. Flow characteristics, including patterns of instantaneous vorticity, streaklines, time-averaged streamlines, velocity vectors, velocity fluctuations, Reynolds stress correlations, and turbulence kinetic energy (), are compared and discussed for a naked sphere and spheres having O-rings. The boundary layer velocity gradient and proximity of the sphere to the flat plate profoundly influence the flow dynamics. At proximity ratios of G/D=0.1 and 0.25, a wall jet is formed between lower side of the sphere and flat plate, and velocity fluctuations increase in regions close to the wall. At G/D=0.25, the jet flow also induces local flow separations on the flat plate. At higher proximity ratios, the velocity gradient of the boundary layer causes asymmetries in the mean flow characteristics and turbulence values in the wake region. It is observed that the O-ring with various placement angles (𝜃) on the sphere has a considerable alteration in the flow structure and turbulence statistics on the wake. At lower placement angles, where the O-ring is closer to the forward stagnation point of the sphere, the flow control performance of the O-ring is limited; however, its impact on the flow separation becomes pronounced as it is moved away from the forward stagnation point. At G/D=1.50 for O-ring diameters of 4.7 (2 mm) and 7 (3 mm) percent of the sphere diameter, the -ring exhibits remarkable flow control at 𝜃=50° and 𝜃=55° before laminar flow separation occurrence on the sphere surface, respectively. This conclusion is yielded from narrowed wakes and reductions in turbulence statistics compared to the naked sphere model. The O-ring with a diameter of 3 mm and placement angle of 50° exhibits the most effective flow control. It decreases, in sequence, streamwise velocity fluctuations and length of wake recovery region by 45% and 40%, respectively, which can be evaluated as source of decrement in drag force.

A Study on the Design and Implementation of a Position Tracking System using Acceleration-Gyro Sensor Fusion

  • Jin-Gu, Kang
    • 한국컴퓨터정보학회논문지
    • /
    • 제28권1호
    • /
    • pp.49-54
    • /
    • 2023
  • GPS(Global Positioning System)는 군사 목적으로 개발되었고, 민간인 신호(GPS L1주파수 C/A 신호)를 개방하면서 많은 발전이 이루어졌다. 현재의 위성은 하루 약 2회 주기로 지구를 공전하며 위치를 측정하는데 위성 신호 3개(초기에는 시각 오차까지 계산하기 위하여 4개)이상을 수신하는데 전파 출발 시간에서부터 수신된 위성 신호의 전파 도달 시간(TOA)까지의 데이터를 삼변측량 방식을 통해 지상 수신기 3차원 위치를 결정한다. 그러나 GPS를 활용한 내비게이션의 경우 보통 5~10m의 위치 오차가 발생하며 아파트와 실내, 터널, 공장지대 및 산악 지대 등, 많은 지역이 GPS의 사각지대 또는 오차 범위 밖의 무력화 지역으로 존재하고 있다. 따라서 GPS 위성 신호의 수신이 불가능한 지역에서 현재의 위치 정보를 획득하기 위해서는 다른 방안이 제시되어야 한다. 본 연구에서는 가속도와 자이로 센서가 결합된 IMU(Inertial Measurement Unit)와 지자기 센서를 이용하여 GPS 신호 수신이 불가능한 지형에서도 위치인식이 가능하도록 시스템을 설계 하였다. 9-DOF IMU와 지자기 센서를 이용한 순간 속도 값을 계산하여 현재의 위치를 추적할 수 있는 방안을 연구 하였으며 제작과 실험을 통해 그 타당성을 검증하였다.

에폭시 복합수지의 내충격성을 향상을 위한 PPG 기반 우레탄 변성 에폭시 합성 및 특성 분석 (Synthesis and characterization of PPG-based urethane-modified epoxy resin for enhancing impact resistance of epoxy composite resin)

  • 황치원;전재희;안도원;유영창;이원주
    • 접착 및 계면
    • /
    • 제23권2호
    • /
    • pp.44-52
    • /
    • 2022
  • 에폭시 수지는 높은 유리전이 온도 (Tg; glass transition temperature)와 우수한 물성에도 불구하고 높은 가교밀도로 인해 순간적인 충격에 쉽게 파괴되는 단점을 가지고 있다. 이를 보완하기 위해 본 연구에서는 폴리프로필렌 글리콜 (PPG; poly(propylene glycol)) 구조 기반의 diamine 물질인 Jeffamine D 2000과 프로필렌 카보네이트 (PC; propylene carbonate)의 개환중합으로 폴리올을 합성하고 이를 이용하여 우레탄 변성 에폭시를 합성하였다. 합성한 우레탄 변성 에폭시의 특성은 FT-IR, 1H-NMR로 확인하였고 접착제로서 내충격성 향상 정도를 확인하기 위해 시중에서 사용되고 있는 비스페놀계 에폭시인 DGEBA (diglycidyl ether bisphenol A)와 경화제, 경화촉진제와 배합하여 우레탄 변성 에폭시 접착제를 만들고 전단강도, 인장강도, 충격강도 실험을 통해 우레탄 변성 에폭시의 특성을 분석하였다. 그 결과 DGEBA와 우레탄 변성 에폭시의 비율이 8:2 일 때, 접착제 내 수소결합에 의한 최적의 시너지 효과로 향상된 기계적 물성을 달성할 수 있었다.

발파작업 시 충전매질에 따른 발파효과 비교 연구 (A Comparative Study on the Effect of Tamping Materials on the Impact Efficiency at Blasting Work)

  • 배상수;한우진;장승엽;방명석
    • 한국지반신소재학회논문집
    • /
    • 제21권2호
    • /
    • pp.57-65
    • /
    • 2022
  • 본 연구에서는 폭약과 발파공 사이의 충전매질을 통한 충격파 전파 효과를 수치적으로 시뮬레이션하고 검증하였다. 고체(Lagrangian)와 유체(Eulerian)를 혼합 모델링하기 위해 Arbitrary Lagrangian-Eulerian(ALE) 방법을 선택하였다. 시간의존적 해석은 발파공정 시간 동안 수행되었다. 폭약과 매질(공기 또는 물)을 유한 요소망으로 모델링하였고, 발파공은 시작점(폭약)에서 발파공벽에 도달하는 전파 속도와 충격력을 결정할 수 있는 강체로 가정하였다. 해석결과에 따르면 물의 전파속도와 충격력은 공기의 경우보다 컸다. 추가로 발파 작업의 실제 현장을 모델링하고 시뮬레이션하였다. 암석은 탄소성체로 가정하였다. 해석결과에 따르면 충전매질이 물인 경우 순간 충격력이 더 크고, 파쇄블록 크기는 더 작은 것으로 나타났다. 반면 발파공배면에서의 충격량은 물인 경우에 더 작았는데, 이는 파쇄에 충격에너지가 상당부분 사용되고, 파쇄로 인한 감쇠 효과에 의해 주변의 고체를 통한 압력 전파는 공기보다 작아지기 때문이다. 이로써 충전매질로서 물이 공기보다 경제성이 더 높다는 것이 입증되었다.

NIRS Analysis of Liquid and Dry Ewe Milk

  • Nunez-Sanchez, Nieves;Varo, Garrido;Serradilla-Manrique, Juan M.;Ares-Cea, Jose L.
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1251-1251
    • /
    • 2001
  • The routine analysis of milk chemical components is of major importance both for the management of animals in dairy farms and for quality control in dairy industries. NIRS technology is an analytical technique which greatly simplifies this routine. One of the most critical aspects in NIRS analysis of milk is sample preparation and analysis modes which should be fast and straightforward. An important difficulty when obtaining NIR spectra of milk is the high water content (80 to 90%) of this product, since water absorbs most of the infrared radiation, and, therefore, limits the accuracy of calibrating for other constituents. To avoid this problem, the DESIR system was set up. Other ways of radiation-sample interaction adapted for liquids or semi-liquids exist, which are practically instantaneous and with limited or null necessity of sample preparation: Transmission and Folded Transmission or Transflectance. The objective of the present work is to compare the precision and accuracy of milk calibration equations in two analysis modes: Reflectance (dry milk) and Folded Transmission (liquid milk). A FOSS-NIR Systems 6500 I spectrophotometer (400-2500 nm) provided with a spinning module was used. Two NIR spectroscopic methods for milk analysis were compared: a) folded transmission: liquid milk samples in a 0.1 pathlength sample cell (ref. IH-0345) and b) reflectance: dried milk samples in glass fibre filters placed in a standard ring cell. A set of 101 milk samples was used to develop the calibration equations, for the two NIR analysis modes, to predict casein, protein, fat and dry matter contents, and 48 milk samples to predict Somatic Cell Count (SCC). The calibrations obtained for protein, fat and dry matter have an excellent quantitative prediction power, since they present $r^2$ values higher than 0.9. The $r^2$ values are slightly lower for casein and SCC (0.88 and 0.89 respectively), but they still are sufficiently high. The accuracy of casein, protein and SCC equations is not affected by the analysis modes, since their ETVC values are very similar in reflectance and folded transmission (0.19% vs 0.21%; 0.16% vs 0.19% and 55.57% vs 53.11% respectively), Lower SECV values were obtained for the prediction of fat and dry matter with the folded transmission equations (0.14% and 0.25% respectively) compared to the results with the reflectance ones (0.43% and 0.34% respectively). In terms of accuracy and speed of analytical response, NIRS analysis of liquid milk is recommended (folded transmission), since the drying procedure takes 24 hours. However, both analysis modes offer satisfactory results.

  • PDF

Estimating soils properties using NIRS to assess amendments in intensive horticultural production

  • Pena, Francisco;Gallardo, Natalia;Campillo, Carmen Del;Garrido, Ana;Cabanas, Victor Fernandez;Delgado, Antonio
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1615-1615
    • /
    • 2001
  • During the past ten years, Near Infrared Spectroscopy has been successfully applied to the analysis of a great variety of agriculture products. Previous works (Morra et al., 1991; Salgo et al., 1998) have shown the potential of this technology for soil analysis, estimating different parameters just with one single scan. The main advantages of NIR applications in soils are the speed of response, allowing the increase of the number of samples analysed to define a particular soil, and the instantaneous elaboration of recommendations for fertilization and soil amendment. Another advantage is to avoid the use of chemical reagents at all, being an environmentally safe technique. In this paper, we have studied a set of 129 soil samples selected from representative glasshouse soils from Southern Spain. The samples were dried, milled, and sieved to pass a 2 mm sieve and then analysed for organic carbon, total nitrogen, inorganic nitrogen (nitrate ammonium), hygroscopic humidity, pH and electrical conductivity in the 1:1 extract. NIR spectra of all samples were obtained in reflectance mode using a Foss NIR Systems 6500 spectrophotometer equipped with a spinning module. Calibration equations were developed for seven analytical parameters (ph, Total nitrogen, organic nitrogen, organic carbon, C/N ratio and Electric Conductivity). Preliminary results show good correlation coefficients and standard errors of cross validation in equations obtained for Organic Carbon, Organic Nitrogen, Total Nitrogen and C/N ratio. Calibrations for nitrates and nitrites, ammonia and electric conductivity were not acceptable. Calibration obtained for pH had an acceptable SECV, but the determination coefficient was found very poor probably due to the reduced range in reference values. Since the estimation of Organic Carbon and C/N ratio are acceptable NIIRS could be used as a fast method to assess the necessity of organic amendments in soils from Mediterranean regions where the low level of organic matter in soils constitutes an important agronomic problem. Furthermore, the possibility of a single and fast estimation of Total Nitrogen (tedious determination by modifications of the Kjeldahl procedure) could provide and interesting data to use in the estimation of nitrogen fertilizer rates by means of nitrogen balances.

  • PDF

Effect of alternative farrowing pens with temporary crating on the performance of lactating sows and their litters

  • Si Nae, Cheon;So Hee, Jeong;Guem Zoo, Yoo;Se Jin, Lim;Chan Ho, Kim;Gul Won, Jang;Jung Hwan, Jeon
    • Journal of Animal Science and Technology
    • /
    • 제64권3호
    • /
    • pp.574-587
    • /
    • 2022
  • This study was performed to development the alternative farrowing pen (AFP) and to investigate performance and behavior of lactating sows and their litter. A total of 64 multiparous sows were randomly divided into two groups and were allocated to farrowing crates (FCs) and AFPs. The AFPs contained a crate and support bars that could be folded to provide the sows with extra space on day 5 postpartum. Behavior was recorded by charge-coupled device cameras and digital video recorders, and the data were scanned every 2 min to obtain an instantaneous behavioral sample. Farrowing systems did not affect feed intake, back-fat thickness, litter size and piglet weight at birth and weaning (p > 0.05). In addition, there were no differences in the number of crushed piglets between the two farrowing systems (p > 0.05). However, the weaning-to-estrus interval was shorter in the sows of the AFPs than in thous of the FCs (p < 0.05). The sows spent most of their time lying down during the lactating period, at about 80% lateral recumbency and 10%-15% ventral recumbency. The only significant differences were in the feeding and drinking behavior between sows in the two farrowing systems (p < 0.05). The FC sows displayed more feeding and drinking behavior than the AFP sows, especially in the late lactating period (p < 0.05). Piglets in the FCs tended to spend more time walking than piglets in the AFPs (p < 0.05), whereas there were no differences in suckling and lying behavior between piglets in the two farrowing systems (p > 0.05). It is concluded that the AFPs with temporary crating until day 4 postpartum did not negatively affect performance and crushed piglet compared with the FCs. It also may improve animal welfare by allowing sows to move and turn around during the lactating period. Further research is needed to find suitable housing designs to enhance productivity and animal welfare.

점증 선행 하중으로 개량하는 연약지반의 계측기반 침하량 예측방법 개발 (Prediction Method of Settlement Based on Field Monitoring Data for Soft Ground Under Preloading Improvement with Ramp Loading)

  • 우상인;윤찬영;백승경;정충기
    • 한국지반공학회논문집
    • /
    • 제24권10호
    • /
    • pp.83-91
    • /
    • 2008
  • 현장계측 자료를 이용하여 연약지반의 향후 침하거동을 예측하는 기존의 방법들은 모두 즉시재하 조건을 가정하고 개발된 방법으로써 실제로는 연약지반의 안정성 등을 고려하여 점증재하가 이루어지는 현장에 적용하기에는 많은 제약이 있다. 본 연구에서는 연약층의 두께, 성토하중 크기, 선행압밀하중, 배수거리, 성토속도 등의 다양한 영향인자를 고려하였으며 점증재하가 완료된 이후의 지반개량 기간에도 지속적으로 예측 정확도를 높일 수 있는 계측기반 침하거동 예측기법을 개발하였다. 점증재하 과정에서의 예측방법과 성토완료 이후의 예측방법이 개발되었으며, 성토 완료 이후의 예측방법은 기하학적 보정을 이용한 정확도 향상기법과 확률론적 보정을 이용한 정확도 향상기법 두 가지를 제안하였다. 대형압밀시험 결과를 이용한 예측기법의 적용성 검증 결과, 기존의 예측기법을 적용할 수 없는 점증재하 초기에도 비교적 적은 데이터를 이용하여 상당히 높은 정확도를 가지고 침하거동을 예측할 수 있었다. 또한, 성토완료이후에도 기존 예측기법과 제안된 방법의 비교, 분석 결과 최종침하량과 RMSE에서 모두 제안된 방법이 기존의 예측기법에 비하여 우수한 예측결과를 보였다.