• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.2
• /
• pp.106-113
• /
• 2012

Recently laws have been enacted to build and promote the use of smart grid. There are also increasing demands for the compliance with international trade agreements and the related international standards. Due to these rapid changes in electric power industry and the market expansion, importances of new technologies and processes have been being increased. To reflect these international trends, the government have carried out the designation of new technology for electric power industry to promote domestic industries and national competitiveness by inspiring technology developments in individual or private industry sectors. In this paper analysis of the current status of the designation of the new technology of electric power has been presented including its problem and effect on the related industries. The analysis is expected to be utilized to enhance sound development and to vitalize the electrical new technology regulation.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.170-173
• /
• 2007

본 논문에서는 LED광원에서 현재 가장 많이 사용되는 MR과 PAR 타입의 램프를 측정 분석하였다. 최대광도 및 광속의 측정값을 비교 분석하였다. 그러나 MR 16 및 PAR 30의 경우 관련 KS 규격상에 광속에 대한 값을 명기하고 있지 않은데 이것은 램프 뒤쪽에 반사경(다이크로익 미러)이 부착되어 있어 가시광을 일정한 방향으로 집중시키는 투광 개념의 광원이므로 광속 측정의 의미가 필요하지 않아서 인 것으로 생각된다. LED광원의 경우 LED자체의 광 확산이 매우 광범위하고, 반사경의 영향을 적게 받고 있어 사이드 방식으로 측정된 상기의 광속값은 불확도 범위이내에 존재할 것이 확실시되므로 향후 LED관련 규격의 제안시 측정이 요구될 것으로 판단된다.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1688-1690
• /
• 2001

The mechanical characteristics of XLPE cable is basic to the installation design. Especially, snake and offset design require accurate coefficient of linear expansion($\alpha$), Young's modulus(E) and bending stiffness(El) of the cable. In this paper, $\alpha$, E and El of 345kV XLPE cable was measured by experimental setup, and verified by measuring axial tension and lateral displacement in snake installation.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.220-221
• /
• 2008

본 연구에서는 빛을 확산시키기 위하여 LED(light emitting diode) 봉지층내에 마이크로 스피어를 형성하였다. 마이크로 스피어는 극성이 다른 이 종의 봉지재(실리콘, 에폭시)를 혼합하여 제조하였으며, 최적 첨가비율은 0.6wt% 이내였다. 광학현미경을 이용하여 측정한 결과, 마이크로 스피어의 직경은 $4{\mu}m$ 내외였으며, 마이크로 스피어는 서로 들러붙거나 침전하지 않았다. LED의 효율은 봉지재의 첨가비율이 증가할수록 감소하였으며, 0.6wt% 첨가하였을 때 약 10% 이내의 효율 감소를 보였다. 지향각은 봉지재 첨가비율을 0${\sim}$0.6wt%로 변화시키면 50도에서 110도까지 증가하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.6
• /
• pp.75-83
• /
• 2014

Suction bucket foundation is installed with the differential pressure created by pumping water out of bucket. Bucket foundation has usually been utilized in mooring anchor for offshore platform or floating oil and gas production facilities in the open sea. After suction bucket foundation successfully was applied as the foundation for offshore wind turbines in Europe, it recently attracts much attention in Korea, too. To estimate the penetration resistance of the suction bucket foundation is one of the important matters that should be considered during its installation. This study carried out a series of model tests to investigate the penetration resistance of suction bucket foundation. And the mobilized soil strength factor was reviewed through comparing the experimental results by two installation ways (e.g., push-in-load and suction) and the results calculated by the conventional equation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.1
• /
• pp.92-98
• /
• 2013

In this paper, Completely beyond the existing conventional Guard Light management system, introduced the 447Mhz band wireless sensor network Guard Light to manage efficiently the shape of the new system is proposed. In addition, about wireless sensor network technology, control server technology, application layer protocol technology etc which is core technology for the proposed system configuration, it was verified by the design and experiment. Especially studying wireless Guard Light System(about 1,700 node configuration) commercially installed in the Daegu area as a results of the study, I would like to prove the effectiveness of the study.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1127-1131
• /
• 2005

One of problems in industries is an installation for an automation system device such sensor, transducer, controller, and so on those are located in different areas. Such problem makes a difficulty for maintenance and installation. The aim of this research attempts to design a high performance controller with remote devices. One attractive is to group near devices in near place together to centralizes control. This paper presents network device groups distributed through digital and analog Remote Terminal Unit (RTUs). Such devices are centralized by computer or PLC control and communicated with similar protocol through serial bus. Our scheme, there are many advantages such as, saving both time and cost,convenience compared to other ways.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.4
• /
• pp.1-5
• /
• 2012

By using LED optical devices and improving the efficiency of optical devices as well as lighting apparatus for humans, LED lighting industry puts the purpose of manufacturing the main products related with information, electric, large-sized LCD BLU, automobile, shipbuilding, agriculture, medical treatment, environment, and telecommunications, etc. Moreover, the main products and the industrial lighting products are manufactured with fusion, as the result, LED lighting industry provides various effects as well as sources of technology based on practical use of LED technology in order to develop the industry from the perspective of the lower price, the higher efficiency, the higher function, the deeper reliance. In the future, not only the development of new LED technology but also the fusion and combination of digital IT technologies using wire-wireless communication, sensor, controller, and artificial intelligence will be expected to create new industrial fields.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.161-165
• /
• 2005

In this paper, we observed degradation characteristics of luminous flux for new light source. Because degradation tests can be a useful tool for assessing the reliability when few or even no failures are expected in a life tests. And we use a simple random coefficient degradation model to induce most suitable equation of degradation. As a result, exponential distribution and equation is best suitable model for new light source.

• International Journal of High-Rise Buildings
• /
• v.11 no.3
• /
• pp.221-226
• /
• 2022

Installation of Structural Health Monitoring (SHM) system is a legal obligation for high-rise buildings over 200 m or 50-floor high in South Korea. CNP Dongyang has developed key technologies for SHM system design, installation, and data analyzing. Also, CNP Dongyang has applied SHM technology to a plenty of South Korea's representative high-rise buildings. The SHM technology, also, could be used in safety management of construction phase, evaluation of structural performance, etc. In this paper, state of the art SHM technologies and their application examples are introduced to give insight for future research and practical use of SHM.