• 한국초전도ㆍ저온공학회논문지
• /
• 제11권3호
• /
• pp.26-30
• /
• 2009

Korea Superconducting Tokamak Advanced Research(KSTAR) device is composed of 30 superconducting magnets, magnet structure, vacuum vessel, cryostat, current feeder system, and etc. KSTAR device is operated in the cryogenic temperature and high magnetic field. We install about 800 sensors - temperature sensors, stain gages, displacement gages, hall sensors - to monitor the thermal, mechanical, electrical status of KSTAR during operation. As a tremendous numbers of sensors should be installed for monitoring the KSTAR device, the method of effective installation was developed. The sensor test was successfully carried out to check its reliability and its reproduction in the cryogenic temperature. The sensor signal is processed by PXI-based DAQ system and communicated with central control system via machine network and is shown by Operator Interface(OPI) display in the main control room. In order to safely operate the device, any violations of mechanical & superconductive characteristic of the device components were informed to its operation system & operator. If the monitored values exceed the pre-set values, the protective action should be taken against the possible damage. In this paper, the system composition, operation criteria, operation result were presented.

• 풍력에너지저널
• /
• 제14권3호
• /
• pp.5-13
• /
• 2023

Floating LiDAR systems (FLSs) are used in many countries because they are easier to install than stationary weather towers, have low maintenance costs, and can be installed in deep sea areas. However, FLSs are rarely used in Korea due to a lack of clear evaluation criteria to verify the reliability and uncertainty of their measurements. This study is the first to verify the reliability of FLSs in Korea with one-year simultaneous observation of six lidar systems - two fixed and four floating systems - in sea areas of Gunsan and Yeonggwang. The reliability of FLSs measurement data was verified by comparison between fixed and floating systems. Moreover, differences between existing wind resource maps and the data observed from the six points were analyzed and wind resource maps were calibrated. The results show a return rate of more than 95 % of the observed data and strong correlations between fixed and floating systems (average R2 of 0.977). Additionally, errors in wind speed predictions to produce a wind resource map could be significantly reduced from 5.7 % to 0.6 % after calibrations with the observation data.

• 한국ITS학회 논문지
• /
• 제19권6호
• /
• pp.49-60
• /
• 2020

교통사고 예방을 위해 설치되는 무인교통단속장비의 운영대수는 매년 경찰청과 지방자치단체의 지속적인 설치로 해마다 증가하고 있다. 하지만 공학적, 체계적인 분석결과가 아닌 민원 위주의 정성적인 판단을 기반으로 설치하고 있어 정량적인 설치기준이 필요한 실정이다. 따라서 본 논문에서는 도로 유형별 사고 심각도를 고려한 설치 판단기준을 제시하고 필요 설치대수를 산출하여 향후 추가 설치대수를 도출하는 것을 목표로 하였다. 사고건수와 KSI를 활용하여 교통사고 심각도를 나타낼 수 있는 ARI 지표를 개발하였으며, 일원배치 분산분석과 군집분석을 통해 도로유형을 4가지 유형으로 분류하고, 도로 유형별 사고 잦은 곳의 사고정보를 분석하여 교통사고 심각도가 높은 군집의 ARI를 도출하였다. 도로 유형별 단속장비의 설치 판단을 위한 ARI 값을 제시하였고, 사고 잦은 곳 중 교통단속장비가 기 설치된 구간을 제외하고 5,244대의 추가 설치가 필요한 것으로 분석되었다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.479-483
• /
• 2008

There are no International Standards or Criteria pertaining to fires inside tunnels at the moment, but there are some fire-related regulations in some advanced countries such as Germany and the Netherlands where some fire-related studies have been expedited. Germany has established regulations related to the safety of structures by stipulating Fire Curves of RABT and EBA Tunnels. Also, the Netherlands has established the resistance capacity of structures by stipulating RWS curve so that they can prevent the adjacent area from being damaged due to a tunnel collapse. Hydrocarbon Fire Curve is the standard assessing the behaviour of a structure in a serious fire, by increasing the heating speed and the maximum temperature of ISO 834 Curve, while MHC Fire Curve, which was established in France, realizes more serious fire conditions. In this study, we aimed to develop the basis of full-sized experiments, with which you can assess the fire-resisting capacity against the fire strength of concrete PC panel lining, through the realization of various tunnel fire curves as mentioned above, by developing the heating furnace suitable for the requirements of Fire-Resisting Standards, with which you can assess the fire damage of tunnel concrete lining. We have developed various conditions of the heating furnace and the method to install a thermo couple within the furnace based on EFNARC and KS F2257-1. We have also conducted a calibrating experiment in order to secure its reliability.

• 대한공간정보학회지
• /
• 제18권3호
• /
• pp.83-90
• /
• 2010

현대사회는 도시환경의 급격하고 복잡한 변화의 결과로 각종 범죄가 빈번히 발생하고 있어 국민의 생명과 재산보호에 대한 요구가 증가하고 있다. 이를 위해 도시지역의 치안 담당자들은 경찰 인력의 부족과 과중한 업무 속에서도 효율적인 범죄예방과 감시활동을 위해 경찰의 역할과 기능을 확대하고 있다. 최근에는 24시간 동안 일정한 지역을 집중적으로 모니터링 할 수 있는 CCTV 등의 인위적인 감시도구를 통해 효과적으로 범죄를 감시하고 예방하기 위한 시스템을 도입하고 있으나 감시도구 설치를 위한 체계적인 기준의 미비와 사생활 침해라는 문제가 발생되고 있다. 따라서 이 연구에서는 CCTV 등의 인위적 감시도구와 범죄 발생지점의 공간적 특성, GIS의 공간분석 기법 등을 이용하여 범죄 모니터링이 가능한 인위적 감시지역을 선정하였으며, 그 결과 CCTV 설치대수가 절대적으로 부족하며, 기존에 설치된 위치도 공간적 분포를 충분히 고려하지 못한 것으로 나타났다.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.93-102
• /
• 2018

차수용 박층 멤브레인은 폴리머로 구성된 재료로 기존 방수포(sheet membrane)를 대체할 수 있는 뿜어 붙이는 방식의 차수 재료이다. 시공에 있어서 뿜어 붙이는 방식을 사용하기 때문에 타설이 용이하고 상대적으로 높은 부착성능을 보인다. 차수용 박층 멤브레인의 배합은 영구 지보재로 쓰이는 TSL(Thin Spray-on Liner)와 매우 유사한 구성을 갖으나 적용 목적에 따라 차수와 지보재로 구분하고 있다. 본 연구에서는 차수용 박층 멤브레인의 차수 성능을 확보한 상태에서 구조적인 성능을 보강할 수 있도록 배합비를 조절하였다. 이를 검토하기 위해, 영구 지보재용 멤브레인 재료에 사용되는 성능 기준에 따라 시험을 수행하고 결과를 검토하였다. 시험결과 본 연구에서 고려한 차수용 박층 멤브레인의 구조적 성능은 영구 지보재로도 사용이 가능한 정도의 성능을 보였다.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.9-17
• /
• 2019

Interest in renewable energy is rapidly growing around the world. One of the most popular renewable energy sources is solar power, and photovoltaic (PV) systems are the most representative route for generating solar energy. However, with the growing adoption of solar power systems, the demand for land on which to install these systems has increased, which has caused environmental degradation. Recently, floating PV systems have been designed to utilize idle water surface areas of dams, rivers, and oceans. Because floating PV systems will be exposed to harsh environmental stresses, the safety of such systems should be secured before installation. In this study, the structural robustness of a floating PV system was analyzed by conducting numerical simulation to investigate whether the system can withstand harsh environmental stresses, such as wind and wave loads. Additionally, conventional wind and wave load predictions based on the design method and the simulation results were compared. The comparison revealed that the design method overestimated wind and wave loads. The total drag of the PV system was significantly overestimated by the conventional design criteria, which would increase the cost of the mooring system. The simulation offers additional advantages in terms of identifying the robustness of the floating PV system because it considers real-world environmental factors.

• 대한건축학회논문집:계획계
• /
• 제35권2호
• /
• pp.127-137
• /
• 2019

Low-rise residential community is the most popular type (51%) of residential neighborhoods in Seoul. Currently, there is a shortage of public facilities needed for living conditions and the quality of life in low-rise residential areas. This study defines 'public facility' as infrastructure to improve the living environment and used by residents jointly in low-rise residential areas. In this regard, this study analyzes current legal and institutional standards, latest trends in public facility of apartments, and residents' demand and satisfaction level in order to find out the criteria for installation of priority public facilities. As a result, the essential facility basically conforms to the number of household which is the standard of the facility supply in apartment. However, considering the limitations on the accessibility due to low density, it should consider two standards at the same time: the number of household and distance (radius of neighborhood). In conclusion, it is necessary to install legally prescribed facilities according to the number of household and distance: 500 households facilities in 250m radius neighborhood and 1,000 households facilities in 400m radius neighborhood. Also, considering the reality of low-rise residential area, it is necessary to integrate some facilities that can be functionally linked to improve level of utility and efficiency of operation and management. It is expected that the output of this study can be applied to institutionalize of the legal basis for the public facility of low-rise residential community.

• 신재생에너지
• /
• 제20권2호
• /
• pp.44-54
• /
• 2024

The objective of this study was to contribute to domestic offshore wind farms by reasonably predicting the expected completion time and installed power generation capacity of offshore wind projects in South Korea. Offshore wind power is drastically regarded as a core tool for clean energy transition and industrial decarbonization in the fight against the climate crisis globally. Especially in South Korea offshore wind power is the main tool in partaking in RE100 and K-RE100, and the Korean government aims to install 14.9 GW of offshore wind farms by 2030. However, this seems to have been significantly delayed due to the complex process of obtaining permits for offshore wind power in Korea. Thus, a reasonable prediction of power generation and a timeline for the final construction are imperative. To establish the delay time for permit licenses, classified location factors were included into site analysis. These factors comprised reviews of transmission and military operability, environmental impact assessment, maritime traffic safety examination, wind resource assessment and an analysis of current offshore wind projects. According to the analysis, the majority of offshore wind projects currently being developed in Korea are predicted to be delayed by 3-5 years as they are among the criteria included in key discussion points for obtaining permits. The cumulative installed power capacity and annual power generation after construction are expected to be 37 GW and 97 TWh respectively.

• 한국수자원학회논문집
• /
• 제49권12호
• /
• pp.1035-1044
• /
• 2016

제방과 보의 접속부에서는 복잡한 3차원이 흐름이 발생하여 붕괴가 자주 발생한다. 따라서 연결부에는 일반적인 호안에 비해 큰 안정성을 가진 연결호안의 설치가 필요하다. 그러나 연결호안에 대한 설계기준은 하천설계기준에 제시되어 있지 않기 때문에 연결호안의 공학적인 설계를 위한 연구가 필요하다. 본 연구에서는 연결호안에 사석을 포설하고 사석의 이탈조건을 파악하기위해 유량을 변화시켜가며 실험을 수행하였으며 실험수로는 폭 4 m, 길이 20 m의 직선수로이며 한쪽에만 제방이 설치되어 있다. 연결호안의 사석직경은 0.03 m 이며 유입유량은 $0.5{\sim}0.8m^3/s$이다. 동일한 조건에 대한 수치모의를 수행하여 연결부에 대한 흐름조건 및 제방 비탈면의 전단응력 등의 분포를 통해 영향범위를 파악하였다. 그 결과 연결호안의 경우 일반호안에 비해 사석직경이 4.1~6.9배 크게 산정되는 것으로 나타났으며 사석의 이탈속도가 같아도 유량이 클수록 취약지역의 범위가 하류방향으로 더 길게 발달하는 것으로 나타났다. 본 연구를 통해 연결호안 주변의 수리학적 특성에 따른 사석직경 및 영향범위를 산정하는 방법을 제안하였으며 추후 고수부지의 영향, 다양한 형식의 보와 호안에 대한 실험과 추가적인 검토가 수행된다면 연결호안의 안정성을 확보 할 수 있는 합리적인 설계방법을 제시할 수 있을 것이라고 기대된다.