• 지질공학
• /
• 제18권4호
• /
• pp.459-470
• /
• 2008

절토사면의 안정과 관련하여 충북 청원군에서 보은군을 가로지르는 국도 25번을 따라 지질구조에 의하여 형성된 여러종류의 사면 파괴유형을 사례 분석을 통하여 해석하고 사면의 불안정성에 영향을 끼치는 요인을 연구하였다. 노두의 발달이 양호한 3 지점을 선정하였으며, 정면적법을 이용하여 불연속면의 방향성, 연장성, 절리의 표면 거칠기 및 암석의 일축압축강도 등 공학적 특성을 분석하였다. 연구지역은 옥천습곡대에 해당되며, 미동산층의 석영편암과 규암과 운교리층의 천매암으로 구성된다 이들 암석은 미약한 변성작용을 받은 변성퇴적암으로 구성되기 때문에 절리구조 이외의 불연속면 즉 편리와 벽개구조 등의 면구조와 습곡작용에 의한 지층의 굴곡현상이 잘 발달되어 있다. 초기의 광역습곡구조와 후기의 중첩습곡구조의 발달에 따른 절리구조의 형성으로 지층의 주향에 평행하거나 수직한 절리군 및 쐐기형 또는 가위형 절리군 등 다양한 형태의 절리가 형성되었으며 절리와 벽개구조 및 층리와 사면의 방향성이 서로 교차하여 여러 종류의 파괴양상을 일으키는 불안정 요인이 되었다. 습곡구조에 의해 사면의 방향과 층리의 방향성이 서로 일치하는 경우 평면파괴를 비롯하여 대규모 파괴를 유발시킬 수 있는 요인이 많았으며, 사면과 층리의 방향성이 서로 고각으로 교차하는 지역에서는 절리군과 벽개의 교차에 의하여 지역적인 소규모의 파괴양상을 보이는 것으로 분석되었다.

• 한국가스학회지
• /
• 제26권6호
• /
• pp.37-44
• /
• 2022

본 연구에서는 SN(Swirl Number)는 같지만 코어부와 스월러부의 질량유량비(m)가 다른 저선회 노즐 2종을 설계하여 상압 연소성능 시험을 수행하였다. 각 노즐에 대해 단열화염온도에 따른 연소성능 실험을 수행하였고 화염구조 특성, NOx 배출 특성, 연소진동 모드를 파악하였다. 화염구조가 크게 차이가 있었지만 CO 배츨 특성은 유사하였고 NOx 배출 특성도 화염구조보다는 연소진동과 더 큰 관련성이 있음을 보였다. 연료노즐의 위치를 변경하여 대류지연시간을 조절하면서 연소진동 및 NOx 배출 특성을 파악하였는데 대류지연시간이 연소진동 주기의 (3+4n)/4±1/4 (n=0,1,2,...) 영역에 들어올 때 진소진동이 강하게 나타나고 반대의 경우는 연소진동이 아주 약하게 발생함을 확인하였다.

• 한국지구과학회지
• /
• 제21권3호
• /
• pp.258-275
• /
• 2000

이 연구의 목적은 동해안 대설시 기상 요소들의 일변화의 특성을 알아보고자 하는데 있다. 1997년 1월 5${\sim}$7일 사이에 발생한 대설을 하나의 사례로 분석하여 보았다. 12시간 간격으로 분석한 지상 일기도와 850hPa 등압면 일기도로부터 기압 패턴을 알아보았다. 영동 동해안 ${\cdot}$ 태백산간 ${\cdot}$ 영서 ${\cdot}$ 경북 동해안 지방으로 세분화하여 강설량 분포와 바람, 운량, 지상 온도, 이슬점 온도, 상대습도, 해면기압 같은 기상 요소들의 일 변화를 분석하여 보았다. 1월 5일은 기압골, 6일은 저기압 후면 그리고 7일은 북동기류 유입으로 눈이 내렸다. 기상 요소들의 일변화의 특징은 영동 동해안 지방인 강릉, 속초 지방의 지상풍향은 남서풍, 북서풍이 유입될 때 대설이 내렸고 태백산간 지방은 북동풍이 유입될 때 지속적인 강설 현상을 나타내었다. 그리고 풍속이 약화됨에 따라 강설도 약화되었다. 지상 온도와 이슬점 온도의 일 변화에서, 포항은 강릉, 속초 지방과 같이 동해안에 위치하면서도 대설이 발생하지 않은 것은 변질되지 않은 시베리아 기단의 영향을 계속 받았기 때문이다.

• 한국추진공학회지
• /
• 제11권1호
• /
• pp.11-17
• /
• 2007

연소실 설계에 따른 실물형 가스발생기의 연소 안정성 특성에 대한 실험적 연구가 수행되었다. 연소성능에 주요한 영향을 미치는 분사기 헤드에는 1.5의 리세스 수를 갖는 내부 혼합형 이중 스월 분사기 37개가 배치되었다. 본 논문에서는 연소실 길이, 직경, 그리고 교반링 등 연소실 설계 변경에 따른 연소 안정성 특성에 대하여 살펴보았다. 연소시험 결과 연소실의 유효 길이가 줄어듦에 따라 불안정 주파수는 고주파 영역에서 발생되며, 압력의 강도는 전반적으로 줄어들어 유해하지 않은 수준으로 감소가 가능하였다. 하지만 축방향 공진주파수에 해당하는 압력 섭동을 완전히 제거시키지는 못하는 것으로 판단된다.

• 한국전문물리치료학회지
• /
• 제12권2호
• /
• pp.44-57
• /
• 2005

The objectives of this study were to examine the relative efficacy of three active exercise programs for work-related, chronic low back pain, and to observe to what extent the programs affected the mechanical stability of the lumbar region. The subjects were 64 employees who were randomly divided into three groups to match the three active exercise programs which were performed 3 times a week for 6 months. All subjects were assessed with the same measurements at a pre-study examination, and then were reassessed at 2 weeks, 3months and 6 months after the study. The pain intensity didn't show any significant difference among the three groups. However, the Oswestry Disability Index showed significant differences among the three groups at 6 months and the lumbar and thoracic exercise groups showed significant decreases compared to the general physiotherapy group (p<.05). Maximal stretching with both hands in the overhead direction showed a significant difference among the three groups at 3 months and 6 months, and the thoracic exercise group at 6 months showed a significant increase in overhead stretching compared to the lumbar exercise and general physiotherapy groups (p<.05). The group that performed maximal stretching with both hands in the overhead direction showed the most significant among the 3 months and 6 months. At 6 months, the thoracic exercise group showed a significant increase in overhead stretching compared to the lumbar exercise and general physiotherapy groups (p<.05). The lumbar region angle of inclination showed significant differences among the three groups at 2 weeks 3 months, and 6 months, with the thoracic exercise group being decreased more significantly at 6 months than the lumbar exercise and general physiotherapy groups (p<.05). Exercise aimed at increasing thoracic mobility has an effect on lumbar stability. Furthermore, it is far more effective for lumbar stabilization than general physiotherapy and deep muscle strengthening lumbar exercise.

• International Journal of Fluid Machinery and Systems
• /
• 제5권1호
• /
• pp.1-9
• /
• 2012

In the turbopump inducer of a liquid propellant rocket engine, cavitation is affected by acceleration that occurs during an actual launch sequence. Since cavitation instabilities such as rotating cavitations and cavitation surges are suppressed during launch, it is difficult to obtain data on the influence of acceleration on cavitation instabilities. Therefore, as a fundamental investigation, in the present study, a three-blade cyclic cascade is simulated numerically in order to investigate the influence of acceleration on time-averaged and unsteady characteristics of cavitation that arise in cascade. Several cases of acceleration in the axial direction of the cascade, including accelerations in the upstream and downstream directions, are considered. The numerical results reveal that cavity volume is suppressed in low cavitation number condition and cavitation performance increases as a result of high acceleration in the axial-downstream direction, also, the inverse tendency is observed in the axial-upstream acceleration. Then, the regions in which the individual cavitation instabilities occur shift slightly to a low-cavitation-number region as the acceleration increases downstream. In addition, in a downstream acceleration field, neither sub-synchronous rotating cavitation nor rotating-stall cavitation are observed. On the other hand, rotating-stall cavitation occurs in a relatively higher-cavitation-number region in an upstream acceleration field. Then, acceleration downstream is robust against cavitation instabilities, whereas cavitation instabilities easily occur in the case of acceleration upstream. Additionally, comparison with the Froude number under the actual launch conditions of a Japanese liquid propellant rocket reveals that the cavitation performance will not be affected by the acceleration under the current launch conditions.

• Journal of Genetic Medicine
• /
• 제1권1호
• /
• pp.27-31
• /
• 1997

Steroid 21 hydroxylase deficiency is a major cause of congenital adrenal hyperplasia (CAH) and is caused by genetic impairment of the gene (CYP21B). In the human genome, CYP21B is located within the MHC class III region on the short arm of chromosome 6. Most of the genes in this region are highly polymorphic and crowded. Also the CYP21B gene is accompanied by its pseudogene (CYP21A) and tandemly arranged with two genes of fourth component of complement. This highly complex gene cluster in this area may predispose genetic instability of CYP21, i.e. mutations. In this study, tried to investigate the frequency of duplication and deletion of CYP21 and patterns of the genetic alterations of these genes.We also compared the genetic alteration in normal subjects with those of the CAH patients. The results showed that 15% of the normal korean population have duplication or deletion of CYP21. There was one normal subject with heterozygous deletion of CYP21B. Of the 5 CAH patients examined, 2 were found to show abnormal patterns. One was a large-scale gene conversion and the other a gene conversion associated with deletion involving both CYP21B and C4 locus II gene. Through this study, we carne to the conclusion that the duplication or even deletion of CYP21 and C4 might be quite a common event in the Korean population and these rearrangements must be regarded as polymorphisms. It could contribute to a high incidencs of CAH by providing a genetic pool of instable CYP21.

• 대기
• /
• 제26권1호
• /
• pp.159-183
• /
• 2016

On 31 July 2014, there was a localized torrential rainfall ($58.5mm\;hr^{-1}$) caused by a strong convective cell with thunder showers over Daegwallyeong. In the surface synoptic chart, a typhoon was positioned in the East China Sea and the subtropical high was expanded to the Korean peninsula. A WRF (Weather Research and Forecasting) numerical simulation with a resolution of 1 km was performed for a detailed analysis. The simulation result showed a similar pattern in a reflectivity distribution particularly over the Gangwon-do region, compared with the radar reflectivity. According to the results of the WRF simulation, the process and mechanism of the localized heavy rainfall over Daegwallyeong are as follows: (1) a convective instability over the middle part of the Korean peninsula was enhanced due to the low level advection of warm and humid air from the North Pacific high. (2) There was easterly flow from the coast to the mountainous regions around Daegwallyeong, which was generated by the differential heating of the insolation among Daegwallyeong and the Yeongdong coastal plain, and nearby coastal waters. (3) In addition, westerly flow from the western part of Daegwallyeong caused a strong convergence in this region, generating a strong upward motion combined by an orographic effect. (4) This brought about a new convective cell over Daegwallyeong. And this cell was more developed by the outflow from another thunderstorm cell to the south, and finally these two cells were merged to develop as a strong convective cell with thunder showers, leading to the record breaking maximum rainfall per hour ($58.5mm\;hr^{-1}$) in July.

• 설비공학논문집
• /
• 제18권12호
• /
• pp.1007-1016
• /
• 2006

Although the advance in electronic technology enables a large number of circuity to be packed in a small volume, it is simultaneously required to remove the high heat load produced by them. In this study, the heat transfer and pressure drop characteristics of a mini-channel heat exchanger, which is designed for liquid cooling of electronic components, are investigated by varying operating conditions. Water and FC-72 were used as working fluids. The mini-channel heat exchanger was made with circular shape channels having din-meters of 2, 3, and 4 mm in regular intervals, and the channel length was 100 mm. The header and inlet guide pathway to provide uniform inflow were attached at the inlet of the test section. Copper block including the heaters was attached at the sidewall of the test section as a heat source, which provided the heat flux from 5 to $15W/cm^2$. The entrance effects enhanced the heat transfer coefficient in the mini-channel significantly. In addition, the single-phase pressure drop in the mini-channel was very similar to that predicted by the laminar flow correlation except that the transition Re decreased due to flow instability in the entrance region.

• 설비공학논문집
• /
• 제27권12호
• /
• pp.609-619
• /
• 2015

A preprocessing scheme utilizing multi-division of the ROI (region of interest) in a chemiluminescence image during inversion is proposed. The resulting inverted image shows the flame's structure, which can be useful for studying combustion instability. The flame structure is often quantitatively visualized with PLIF (planar laser-induced fluorescence) images as well. The chemiluminescence image, which is a line-integral of the flame, needs to be preprocessed before inversion, mainly due to the inherent noise and the assumption of axisymmetry during the inversion. The feasibility of the multi-division preprocessing technique has been tested with experimentally-obtained OH PLIF and $OH^*$ chemiluminescence images of jet and swirl-stabilized flames burning substitute natural gas (SNG). It turns out that the technique outperforms two conventional methods, specifically, the technique without preprocessing and the one with uni-division, reconstructing the SNG flame structures much better than its two counterparts when compared using corresponding OH PLIF images. The characteristics of the optimum degree of polynomials to be applied for curve-fitting of the flame region data for the multi-division method involving two flames has also been investigated.