• Journal of Auto-vehicle Safety Association
• /
• v.5 no.2
• /
• pp.57-61
• /
• 2013

A column for streetlamp has been damaged by severe wind loads such as typhoon. The stress concentration around the inspection hole may cause the collapse of the column for streetlamp. In this paper, the effects due to the wind load of 60 m/s and the car crash to the column at the speed of 48 km/h were considered to examine the design stability analysis of the column for streetlamp. The maximum von Mises stress did not exceed the yield stress of the material. Considering the car crash, the column for streetlamp was not collapsed.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1636-1641
• /
• 2011

Typically Korea Railroad is executing the limited inspection and general inspection about passenger car by mileage and the time elapsed.(ex. one year, two years) These types of inspection system continue from the beginning of the railroad operation of the steam locomotive age to present. According to the rolling stocks modernized and improved, mileage and the time elapsed for periodical inspection has been expanded but the basic maintainability system of rolling stocks is not that different from the past. This fact needs verification that modern inspection method is right from various fields. In this paper, we analyze the data that we get the maintenance record from Korea railroad company about periodical inspection and failure. Next to considering the correlation of periodical inspection with failure based on analyzed data for watching periodical inspection effects. And we desire to need efficient rolling stock maintenance system better than fixed periodical inspection.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.158-166
• /
• 2007

After constructing the high-speed railroad, KORAIL acquired advanced maintenance techniques about Rolling-stocks. Also RCM theory is applied to maintenance field like as inspection period and method. In the meantime, the development of the maintenance methode for Rolling-stock is slow when it compares to the components and system technology. For this reason KORAIL tries to build the optimal maintenance system which can lead the Rolling-stock maintenance technique. The existing vehicle except High Speed train KTX are separated to electric motor car, electric locomotive, diesel locomotive, diesel car, passenger car and freight car. The inspection period and methode for existing vehicles which mentioned above will be examined and the optimal Rolling-stock maintenance technique will be applied.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.391-392
• /
• 2007

• The Journal of Korea Robotics Society
• /
• v.5 no.1
• /
• pp.77-84
• /
• 2010

This paper proposes a bridge inspection system using a robot to manage the safety status of bridges. A conventional bridge inspection has a lot of problems because inspection is conducted manually by human. As an alternative, we are to develop a robot system having machine vision and this robot system is mounted on an end linkage of specially designed car having seven DOF (Degrees Of Freedom) to inspect cracks beneath bridge. This system is able to check a status of the bridge and record its changes every other year. As a result, the developed robot system offers us the inspection result of quality and reliability about the bridge inspection status. Also, we have tested the effectiveness of the suggested system through outdoor experiments.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1642-1649
• /
• 2010

At present, KORAIL is in the middle of renovating. All steps exert great effort at cost reduction and a profit improvement. Especially to improve maintenance method and inspection period at the rolling-stock division lots of research is under progress. Daily inspection of rolling stocks is to operate the rolling stock normally. Daily inspection items are driving control device, coupling device, brake system, water system and air conditioning system, electrical system etc. Half of the maintenance manpower are inputted at daily inspection. Strengthens the quality and optimize the proportion of daily inspection are urgent problem. Daily inspection period extension aim is as follows. KTX from 3,500km to 5,000km, passenger car from 1st to 3,500km, new style electric locomotive from 2nd to 5,000km, the diesel locomotive is 2,800km from 1,200km. In this paper, the optimal daily inspection period and methods are considered including expected problem and counter measures.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.4
• /
• pp.6-11
• /
• 2016

The objective of this study is to present the inspection standards of motorcycle lamps affecting motorcycle traffic accident in night time. The inspection standards of motorcycle lamps recommended by CITA International Motor Vehicle Inspection Committee are surveyed. Also, the domestic safety standards of motorcycle and inspection standards of passenger car are considered. The inspection standard and method with principal reasons of rejections of head-lamp, number plate lamp, front-rear position lights, stop lamp and direction indicators of motorcycles are suggested.

• Management & Information Systems Review
• /
• v.15
• /
• pp.187-222
• /
• 2004

The existing fixed telematics facilities for car were restricting of efficiency, utilization, communication, possibility, so it become disconnected with reality in the domestic and foreign market within thy near future, like as the case of 'car-phone'. It is too difficult to make a various business model on the restrict basis. To solve these problems, We suggested Tablet PC system as a new mobile telematics platform. The telematics platform based on the Tablet PC realize the perfect office, because it shows an excellent portability, high power and extension, various input equipment, and environment of communication in the car. To realize this concreteness, it needs a proper marketing strategy for a new business model. For this purpose, We analyzed the structure of industry, selected a proper target market, and established the strategy of marketing. Additionally, We proposed new business models ; particularly Portal site, Car-Home network, Car Software Tuning, and T-Vaccine(Intelligent Car Inspection System). These are made possible by the only Tablet PC platform.

• Journal of the Korea Institute of Construction Safety
• /
• v.6 no.1
• /
• pp.7-11
• /
• 2024

Pump car is an equipment that transports concrete products as needed to the place where they are poured. In order to pour a large amount of concrete in a short period of time, using a pump car is the most efficient in terms of economic efficiency and quality control. However, recently, many casualties have occurred due to boom damage during concrete pouring, so this study suggests that improvements are needed in the equipment manufacturing stage, inspection standards for old equipment, and equipment rental system. The reason is that, as a result of the finite element analysis of the pump car, the significant stress acting at the second stage of the boom and the maximum stress at the top of the boom were found to be 895.39 MPa, and M.S. Since it was evaluated the lowest at 0.04, the need for reinforcement was recognized. And it was confirmed that the 2nd stage boom was the most stressful and vulnerable part of the 1st to 5th stage booms. Therefore, it is necessary to increase the thickness and rigidity of members at the design and manufacturing stage, and to reinforce the steel plates of currently used equipment. In addition, it is urgent to establish a system that makes non-destructive testing mandatory for all general construction machinery and holds inspection agencies responsible for missing boom defects during non-destructive testing and regular inspections.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.5
• /
• pp.740-745
• /
• 2008

This paper presents a new non-contact 3D robotic inspection system to measure the precise positions of screw and punch holes on a car body frame. The newly developed sensor consists of a CCD camera, two laser line generators and LED light. This lightweight sensor can be mounted on an industrial robot hand. An inspection algorithm and system that work with this sensor is presented. In performance evaluation tests, the measurement accuracy of this inspection system was about 200 ${\mu}m$, which is a sufficient accuracy in the automotive industry.