• Proceedings of the ESK Conference
• /
• 1992.10a
• /
• pp.90-95
• /
• 1992

In this study, the application of fuzzy hierarchical analysis for modeling the inspection tasks with respect to the the improtances of the cognitive factors is considered and it's validity in cognitive researches is confirmed. The results of the relative importance of various cognitive factors can be served as a selection criteria for efficient inspection performance and the information of skilled learning for a inspection training program.

• Journal of Korean Society for Quality Management
• /
• v.24 no.1
• /
• pp.20-31
• /
• 1996

A pure zero-one integer program is formulated for determining where to assign the inspection stations in a multi-stage production system. The objective fuction is formulated to minimize the overall inspection costs. One of the major characteristics of this system is that an assigned inspection station is to inspect only the items produced in previous manufacturing stages. Each inspection station can be assigned to any possible inspection stage between two manufacturing stages. Error-free and screening inspection policy is assumed in this system and the defective items found in any inspection station will be reworked at once. The integer programming model presented in this paper has the advantages in the ease of modeling and modifiing as compared with the existing dymanamic programming methods. The solutions of the model can be easily obtained by the commercially available softwares like LINDO and GAMS.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.169-175
• /
• 2012

Self-Inspection is being used in the workplace hazardous, dangerous machinery and equipment to build capacity for the voluntary safety risks due to use of machinery and prevention of industrial accidents that inspect facilities for safety issues, is to check. However, December 31, 2008 as part of Article 36 of the Occupational Safety and Health Act (safety inspection), the financial vanish as the self-test, Safety inspection program has been changed., In each individual workplace that creates its own standards and regulations to use the existing inspection system is in some cases. This study is located in the southeast industrial complex as a risk reducer manufacturer, machine-based target zones in S Corp owns most of the crane based on the results of the tests is to analyze the problem. Then check the results - to bring its measures and information you need to know for sure is to propose.

• The Journal of Korea Robotics Society
• /
• v.2 no.2
• /
• pp.161-167
• /
• 2007

It is dangerous that an inspector overhauls defects and condition of the inner parts of an oil tanker because of many harmful gases, complex structures, and etc. However, these inspections are necessary to many oil tankers over old years. In this study, we proposed the design of mobile robot for inspection of CAS in oil tanker. The developed CAS inspection mobile robot has four modules, a measurement module of oil tanker's thickness, a corrosion inspection module, a climbing module of the surface on a wall, and a monitoring module. In order to get over at a check position, the driving control algorithm was developed. Magnetic wheels are used to move on the surface of a wall. This study constructed a communication network and the monitoring program to operate the developed mobile robot from remote sites. In order to evaluate the inspection ability, the experiments about performance of CAS inspection using the developed mobile robot have been carried out.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.150-155
• /
• 2013

This work present a new method of sealing inspection system for vehicle in which foam rubber materials are used for sealing the vehicle parts. This system is composed from a devices comprising non-contact and real-time scanning on visual inspection in machine parts. We have been investigated qualitative factors that influenced on sealing system of vehicle structure which flexibly attenuated vibration and plenty of foam rubber materials having elastic property. However, there are different factors which still depended on outdated technique (personnel subjective judgment) in the performance inspection of rubber parts, specially for cross section inspection. Through a newly developed inspection system which recently applied for the production line, we successfully achieved more effective results of matching rate by about 80 % in the sealing performance inspection with 0.7% to 1.4% in the repeated errors. These are resulted from non-contacted response by CCD camera and vision program using geometry matching method. We expect that this system may be widely applied in the strict inspection parts of more diverse cross-section in future.

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.568-575
• /
• 2010

Flow Accelerated Corrosion is an active degradation mechanism of CANDU feeder. The tight bend downstream to Gray loc weld connection, close to reactor face, suffers significant wall thinning by FAC. Extensive in-service inspection of feeder wall thinning is very difficult because of the intense radiation field, complex geometry, and space restrictions. Development of a knowledge-based inspection program is important in order to guarantee that adequate wall thickness is maintained throughout the whole life of feeder. Research results and plant experiences are reviewed, and the plant inspection databases from Wolsong Units One to Four are analyzed in order to support developing such a knowledge-based inspection program. The initial thickness before wall thinning is highly non-uniform because of bending during manufacturing stage, and the thinning rate is non-uniform because of the mass transfer coefficient distributed non-uniformly depending on local hydraulics. It is obvious that the knowledge-based feeder inspection program should focus on both fastest thinning locations and thinnest locations. The feeder wall thinning rate is found to be correlated proportionately with QV of each channel. A statistical model is proposed to assess the remaining life of each feeder using the QV correlation and the measured thicknesses. W-1 feeder suffered significant thinning so that the shortest remaining life barely exceeded one year at the end of operation before replacement. W-2 feeder showed far slower thinning than W-1 feeder despite the faster coolant flow. It is believed that slower thinning in W-2 is because of higher chromium content in the carbon steel feeder material. The average Cr content of W-2 feeder is 0.051%, while that value is 0.02% for W-1 feeder. It is to be noted that FAC is reduced substantially even though the Cr content of W-2 feeder is still very low.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.893-898
• /
• 2007

At present, one of the big characteristics in electric power market in korea is unique seller but in the near future competitions are expected in the market. so additional service for the electric power are expected. Also with development of IT technology, remote inspection for power usage are possible so as consumption pattern analysis. KORAIL is one of the biggest consumer in electric power market so it is necessary to investigate power consumption pattern. This paper presents electric load consumption pattern for representative substation like urban subway, high-speed train, industrial line and simulation program for electric power rate definition program based on billing system database. Base on the substation annual power usage DB data, the characteristic of the substation power consumption are investigated and effective electrical billing system are compared each other. Through this program it is verified that we can save more then several hundred million won for a year.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.411-414
• /
• 2008

OPC is the preferred communication standard for sharing process control data at all levels of the enterprise and becomes the global standard, sends/receives the data with PLC programs of inspection system via network, and manages various data using OPC server. In this paper, we introduce the developed OPC client system for FPD inspection system with OPC server. To control inspection system through OPC server, we have developed libraries which consist of stage driver, switch driver, microscope driver, image processing, alignment, and task management modules. Also we have developed the test program to verify all functions precisely. We describe the mechanism of inspection system, OPC connection method, and programs.

• Journal of Food Hygiene and Safety
• /
• v.14 no.1
• /
• pp.104-114
• /
• 1999

This study was conducted to find out the proper ways of implementation of Hazard Analysis Critical Control Point (HACCP) concepts applicable to the current Korean food inspection system. The following recommendations are based on an in-depth review of the Canadian Food Safety Enhancement Program (FSEP), which is one of the leading HACCP programs adapted to the food industry. Since 1997, the HACCP system has been voluntarily applied to meat processing plants in Korea in accordance with the Food Protection Law. But the guidelines are obscure and inadequate to expand to the diversity of food plants, and are therefore only applied to a limited number of plants of small scale enterprise. For these reasons, it is necessary to prepare an enhanced food safety control program focused not only on the HACCP plants but also on the non-HACCP plants. The national program should be the fundamental framework of a food safety control policy enforced by all the relevant authorities. The Prerequiste Program of Canadian Food Inspection Agency and Sanitation Standard Operating Procedures (SSOP) of FSIS are good example programs for the non-HACCP plants. These programs, which are a major part of the HACCP system, could easily be adapted to the Korean food industry. To improve the current HACCP implementation guideline, it is necessary to develop a detailed implementation manual, generic HACCP model, training program, and an audit program.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.186-196
• /
• 2004

In each country, the periodic ISI(In-Service Inspection) is required by the law to protect the public health and property from the potential accident of the nuclear facilities. To support the implementation of ISI program, the prescriptive ISI technical standards have been established. As the key parts of the ISI program, the non-destructive examination techniques are widely used to identify the degree of degradation of the pressure boundary components and welds. Recently, the risk informed-ISI program has been developed and implemented in several countries. Nonetheless, the existing ISI program which prescriptively decides the scope of inspection still has its own significance. In this article, the technical standards of ISI in leading countries like US, france, Canada, and Japan are reviewed and compared with the safety guide by IAEA. An outline to revise the domestic technical standards of ISI has been suggested.