• Korean Journal of Computational Design and Engineering
• /
• v.22 no.1
• /
• pp.44-58
• /
• 2017

The inspection for building occupancy authorization has lacked objectivity due to manual measurement methods. This is why connivance of the illegal buildings has been rampant, which has led to so many incidents. Consequently, this law has lost its intent to protect people's lives and property. In this study, for the purpose of improvement of this law, the research was conducted by the utilization of unmanned aerial vehicle for automated inspection for building occupancy authorization. Theoretical considerations about building occupancy authorization and the trend of UAV technology were accomplished. Secondly, a series of reverse engineering was conducted including digital photography, network RTK-VRS surveying and post-processing data. Thirdly, the resultant spatial information was used for building occupancy inspection authorization in a BIM platform and the effectiveness and applicability of UAV-based inspection was analyzed. As a result, methodology for UAV-based automated building occupancy inspection authorization was derived. And it was found that eleven items would be possible to be automated among thirty total items for building occupancy authorization. Also it was found that UAV-based automated inspection could be valid in inspecting building occupancy authorization due to authentic accuracy, effectiveness and applicability with government policy.

• Journal of Korean Institute of Industrial Engineers
• /
• v.11 no.2
• /
• pp.11-18
• /
• 1985

Three types of warranty policies are considered. They are (1) free warranty policy for repairable products, (2) free warranty policy for nonrepairable products, and (3) rebate warranty policy. Under each warranty policy, a single sampling attribute plan with non-destructive testing is considered. A sampling plan is characterized by the sample size and the acceptance number. For each case, characteristics of an optimum sampling plan are discussed and determined, which minimize the warranty cost and the corresponding quality control cost within the assigned producer's risk and consumer's risk.

• Transportation Technology and Policy
• /
• v.5 no.4
• /
• pp.143-151
• /
• 2008

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.143-157
• /
• 1996

This paper addresses the effects of an imperfect production process on the optimal production quantity and quality inspection policies. The system is assumed to deteriorate during the production process. The result are either the production of a number of defective items or the breakdown of the production meachine. A simple rule has been suggested to determine whether multiple quality in spection is workth or not. Furthermore, when multiple inspection policy is adopted, the optimal in spection schedule is shown to be equally spaced throughout the production cycle. Exact solution and approximation of the optimal production quantity and approximation of the optimal number of inspection are provided. Finally , to better understand the model of this paper, comparisons between this model and classical EMQ model are provided.

• Journal of the military operations research society of Korea
• /
• v.18 no.1
• /
• pp.1-14
• /
• 1992

As North Korea signed 'the Korea Peninsula Non-Nuclearization Joint Declaration' at the end of last year as well as full-scope safeguards agreement with the IAEA in Jan.30 1992, her nuclear activity was incorporated into the international monitoring system and opportunities were arranged to .obstruct her nuclear weapon development and nuclear material diversion, which have been international issues up to recent years. However, achieving goals of the Joint Declaration and safeguards agreement should presuppose North Korea's sincerity toward the abandonment of nuclear weapon development. In this study, first of all, her nuclear policy, current situation of nuclear development and the capability of nuclear development are analyzed. Also, based on the analysis. attempts have been made to find methods of effective performance of the South-North Korea mutual nuclear inspection and the suggested methods are as follows; 1) Analysis of the limits of IAEA inspection and suggestion of its supplementary strategies 2) Securing and training professional inspectors for the South-North mutual inspection 3) Establishment of the verification technology to detect nuclear material diversion.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.735-746
• /
• 2020

Recently, in Korea, various technology developments have been made to utilize 3D space and facility data such as unmanned aerial vehicles (UAV) and laser scanners with the goal of improving productivity at construction sites. However, the lack of related regulations for 3D laser scanner surveying has been a barrier to using the technology across the surveying industry. As a result, owners, contractors, and construction supervisors are reluctant to introduce and apply technology to the site. In this study, the guidelines (drafting and inspection work to be supervised by construction supervisors when constructing earthworks using laser scanners) was developed and presented so that the earth surveying and quantity calculation technology using a laser scanner could be applied and diffused in a construction site. Through the development of this guideline (proposal), it is judged that the supervision and inspection of earthworks quantity using a laser scanner will be activated in the field.

• Korean Journal of Veterinary Service
• /
• v.34 no.4
• /
• pp.441-448
• /
• 2011

According to the Korean government policy of expanding HACCP system application to food chain from farm to meat market, the importance of HACCP assessment to keep balance among the certified HACCP plants is urged. The objective of this study is to recommend more effective HACCP assessment methods. We reviewed major foreign countries HACCP implementation policy focused on the audit system, and compared with the Korean HACCP assessment system. We found that the checklist guidelines of prerequisite program were not enough for precise evaluation and many of the items were not directly related to the risk occurrences. And current rating grade for each items and judgments were inadequate to induce non-compliances and corrections for better HACCP implementation. We suggest revision points as follows; (1) checklists should be revised and reorganized according to the possibility of risk occurrences, (2) all the items should be supported by detailed guidelines for more objective inspection, (3) non-compliances identified must be reconfirmed after correction, (4) the items for HACCP plan should be divided into an accreditation inspection and a regular inspection, (5) rating grade 'high', 'medium', 'low', 'failure' was better for indicating non-compliances.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.47-53
• /
• 2023

In the inspection of workplace hazards/risk factors by specialized institutions dedicated to safety management, inspection reports vary based on the inspectors, who lack the authority to enforce improvement of workplace hazards/risk factors. Thus, improvement and accident rates remain steady without decreasing. This study performed a regression analysis on the relationship between improvement and accident rates of categorized inspection items by classifying hazards/risk factors from inspection reports submitted by a specialized safety management institution in Chungbuk after inspecting 10 food and beverage manufacturers over the past three years. The hazards/risk factors were classified into five categories: mechanical, electrical, chemical, human, and environmental. The regression analysis revealed that the improvement rate of hazards/risk factors inspected by the specialized safety management institution influenced accident rates. To enhance improvement rates based on these findings, this study prioritized the correction of the five most frequently cited inspection items with the lowest improvement rates in each area. Based on these inspection items, this study suggested a checklist for use in workplace safety inspections of food manufacturers. This proposed checklist is expected to reduce accident rates in food manufacturing facilities. Currently, guidance and inspection of workplaces are mainly focused on accident rates rather than correcting hazards/risks. Thus, accident rates remain unchanged as workplace risks are inadequately improved according to the unique characteristics of each workplace. When conducting workplace guidance and inspection, policy measures and inspection methods are warranted to increase the improvement rate of hazards/risks.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.11a
• /
• pp.329-333
• /
• 2000

Delay time analysis is a pragmatic mathematical concept readily embraced by engineers which has been developed as a means to model maintenance decision problem. This paper considers an inspection period using delay time analysis for fishing vessel equipment. We assume that delay time distribution is Weibull and inspections are perfect. In this paper, we determine the optimal inspection period which minimize the expected downtime per unit time.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.16 no.1
• /
• pp.13-34
• /
• 1991

A production/inventory system is considered in which a production facility produces one type of product. The demand for the product is given by a compound Poison process and is supplied directly from inventory when inventory is available and is lost when inventory is out of stock. The processing time to produce one item is assumes to follow a general distribution. An (s, S) policy is considered in which production stops at the instant the stock on hand reachs S and the setup of the production facility begins at an inspection point when the stock on hand drops to or below s for the first time. The time interval between two successive inspection points during a non-production period is a random variable which follows a general distribution.