• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.146-146
• /
• 2021

A contamination event occurring in water distribution networks (WDNs) needs to be handled with the appropriate mitigation strategy to protect public health safety and ensure water supply service continuation. Typically the mitigation phase consists of contaminant sensing, public warning, network inspection, and recovery. After the contaminant source has been detected and treated, contaminants still exist in the network, and the contaminated water should be flushed out. The recovery period is critical to remove any lingering contaminant in a rapid and non-detrimental manner. The contaminant flushing can be done in several ways. Conventionally, the opening of hydrants is applied to drain the contaminant out of the system. Relying on advanced information and communication technology (ICT) on WDN management, warning and information can be distributed fast through electronic media. Water utilities can inform their customers to participate in the contaminant flushing by opening and closing their house faucets to drain the contaminated water. The household draining strategy consists of determining sectors and timeslots of the WDN users based on hydraulic simulation. The number of sectors should be controlled to maintain sufficient pressure for faucet draining. The draining timeslot is determined through hydraulic simulation to identify the draining time required for each sector. The effectiveness of the strategy is evaluated using three measurements, such as Wasted Water (WW), Flushing Duration (FD), and Pipe Erosion (PE). The optimal draining strategy (i.e., group and timeslot allocation) in the WDN can be determined by minimizing the measures.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.97-111
• /
• 2021

Purpose: It is expected that various infrastructures diagnosis equipment will be needed as infrastructures management is strengthened to implement the Framework Act on Sustainable Infrastructure Management. It is necessary for a certification system to supply certified products of a reasonable level in accordance with market requirements for various convergence equipment. This paper deals with the introduction of certification system of inspection and diagnosis equipment for infrastructure using advanced technologies. Method: The basic elements, systems and procedures of certification system were reviewed through analyzing and comparing the existing similar certification system in Korea. In addition, a survey was conducted on a catalog method and the minimum performance criterion (sampling survey and complete enumeration survey) to equipment developers (manufacturers), clients and equipment users. Result: This survey showed that clients preferred complete enumeration method on the basis of minimum performance, and equipment users also preferred complete enumeration survey and sample survey, for minimum performance, at a similar rate. On the other hand, equipment developers preferred the catalog method. Conclusion: Clients and users who are the users of the diagnostic equipment preferred the minimum performance criterion because their trust in quality is important. On the other hand, developers(manufacturers) preferred the catalog method which adopts self certification because it is regulated in developing various products. There is no specific plan for the minimum performance standards required for the introduction of the method which users demand, at present. In addition, it is not desirable to force to introduce a certification system because it requires a considerable period of study to prepare the specific standards. Therefore, it is appropriate to operate the system for a certain period of time centering around the catalog method for the stable and continuous development of the infrastructure diagnosis and test equipment market in Korea. Also, it is effective to expand and develop the certification system to the extent that it minimizes the impact on the market when specific plans for the standards are prepared in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.1044-1049
• /
• 2014

This study was conducted in order to investigate whether the presence of light or different colors of light would influence the energy expenditure and behavior of broiler chickens. Eight 8-week-old broiler chickens were adapted to a respiration chamber (Length, 28.5 cm; Height, 38.5 cm; Width, 44.0 cm) for one week prior to the initiation of the experiment. In experiment 1, energy expenditure and behavior of the chickens were analyzed in the presence or absence of light for four days. Chickens were exposed to 6 cycles of 2 h light/2 h dark period per day. In experiment 2, the broiler chickens that had been used in experiment 1 were used to evaluate the effect of 4 different wavelength light-emitting diodes (LEDs) on the energy expenditure and behavior of broiler chickens. The LEDs used in this study had the following wavelength bands; white (control), red (618 to 635 nm), green (515 to 530 nm) and blue (450 to 470 nm). The chickens were randomly exposed to a 2-h LED light in a random and sequential order per day for 3 days. Oxygen consumption and carbon dioxide production of the chickens were recorded using an open-circuit calorimeter system, and energy expenditure was calculated based on the collected data. The behavior of the chickens was analyzed based on following categories i.e., resting, standing, and pecking, and closed-circuit television was used to record these behavioral postures. The analysis of data from experiment 1 showed that the energy expenditure was higher (p<0.001) in chickens under light condition compared with those under dark condition. The chickens spent more time with pecking during a light period, but they frequently exhibited resting during a dark period. Experiment 2 showed that there was no significant difference in terms of energy expenditure and behavior based on the color of light (white, red, green, and blue) to which the chickens were exposed. In conclusion, the energy expenditure and behavior of broiler chickens were found to be strongly affected by the presence of light. On the other hand, there was no discernible difference in their energy expenditure and behavior of broiler chickens exposed to the different LED lights.

• Korean journal of food and cookery science
• /
• v.29 no.4
• /
• pp.417-424
• /
• 2013

This study was carried out to investigate the effect of safflower seed on the physicochemical properties of ground pork during frozen storage. Three types of ground pork were evaluated: 20% pork back fat added (T0, control), 10% pork back fat and 10% added safflower seed (T1), and 20% added safflower seed (T2). Water holding capacity decreased with longer storage period, and that of T2 was the highest (p<0.05). Cooking loss increased with longer storage period, and that of T1 and T2 was higher than that of T0 (p<0.05). The reduction in diameter of T0 increased, but that of T1 and T2 was not significantly different with longer storage period. Hardness and chewiness increased, but springiness decreased with longer storage period (p<0.05). Hardness, springiness and chewiness of T2 was the highest (p<0.05). The pH decreased with longer storage period (p<0.05), and those of T0, T1 and T2 were pH 5.41, 5.43 and 5.32, respectively, after 50 days of storage. The TBARS (2-thiobarbituric acid reactive substances) values of T0 and T1 increased, but that of T2 was not significantly different with longer storage period. The TBARS values of T0, T1 and T2 were 4.76, 2.77 and 0.54 mg malonaldehyde/kg, respectively, after 50 days of storage. The $L^*$, $a^*$ and $b^*$ value of T0 was the highest among the samples (p<0.05), the $a^*$ value of the samples decreased with longer storage period (p<0.05). In conclusion, this study demonstrates that the addition safflower seed tended to improve physiological properties and antioxidative effects.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.78-86
• /
• 2017

As the amount of slag generated annually increases, attempts to recycle slag as high value products are underway in order to develop an efficient resource recycling industry based on slag and derive economic benefits as well. However, the application of electric arc furnace (EOS) slag as construction material is practically limited because of the unstable substances included in it, such as free CaO.(EOS contains a small amount of free CaO, but several limitations still exist. Slag is stored for more than 3 months depending on the quantity of slag, which leads to additional economic loss. In this study, the amount of free CaO present in EOS is quantitatively evaluated to examine its qualities as a potential construction material and verify its application as concrete material. The quantitative analysis of free CaO present in EOS is performed using ethylene glycol. The free CaO contents of EOS samples were found to be below 0.5%. This satisfies the criteria specified in KS F 4571, which states that the CaO content should be below 40% and $CaO/SiO_2$ ratio should be below 2.0. In addition, it was confirmed that free CaO content difference appears to be dependent on the aging period and storage position.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.101-106
• /
• 2013

Purpose: As UBC IRMA is being tested, patients out of the reference value are reacting within the value again a few days later the urine collection tested, which causes the reliability of the test to decrease as a result. In this study, we can assume that the physiological changes in the factors would affect the results. The purpose of the study is to find out whether hematuria and proteinuria in the sample as well as the interval time (3 hours or more recommended) have affected the results. As a result, we could discover the changes in factors and increase the reliability of the test. Materials and Methods: 468 people (female: 249, male: 219) who came for the check-up were presented herein for medical examination from 2013.3.15 to 2013.1.2. Some people out of 468 who have reacted onto the reference value were divided into group low titer zone, ow-middle titer zone, and middle-high titer zone and tested for hematuria and proteinuria. During that period, 48 outpatients were asked to fill in a questionnaire regarding the urination interval time. The reagents used were (IDL Biotech AB, Sweden) and UBC IRMA. Results: Of the patients that are formed in the reference value of ($0.1-34.0{\mu}g/L$) turn out to be 52.7 years average age in their low concentration, ($mean{\pm}SD$) of the value of $0.10{\pm}0.02{\mu}g/L$. Among 80 people (50.8%, female: 49.2%), 16 patients (20%) have shown reaction to microscopic hematuria and 10 patients (12.5%) responded to proteinuria. In the average low concentration under 52.5 years of average age, 43 people (53%) have shown reaction to microscopic hematuria and 21 people (26.3%) are proteinuric patients out of 80 patients (male: 50.8%, female: 51.3%). In the middle high concentration of $11.8{\pm}4.82{\mu}g/L$ under the average age 51.7 years, 35 patients (53%) have responded to the microscopic hematuria and proteinuric patients are 26 people (39.3%) out of 66 people (men: 44%, women: 56%). In addition, in the concentration of $51.7{\pm}43.5{\mu}g/L$, some patients who get out of the reference value are observed as the average age of 52.0. 11 patients (78.6%) out of 14 (male: 35.7%, female: 64.3%) react to the microscopic hematuria. There show 6 people (42.8%) who turn out to be as proteinuric patients. As for the interval time, $1.67{\pm}3.71{\mu}g/L$ was the average value among 48 patients (female: 45.8%, male: 54.2%). Conclusion: We cannot see if proteinuria and hematuria directly affect abnormal results of inspection of 8,18 cytokeratin; however, we can find out that they statistically have an influence on highly generating UBC among several mechanisms. Also, although urination interval time was various every 15 minutes, we it does not affect these results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.143-154
• /
• 2012

The wireless low-floored tram is an innovative transportation system which is environment-friendly and highly energy-efficient. In addition, the system has various advantages such as low construction cost, improvement of urban landscape, revitalization of surrounding commercial area, elevated convenience for passengers, etc. Therefore, more than ten local governments have proposed tram construction projects in Korea. Accordingly, many research and development projects are ongoing funded by government including the developments of tram vehicle, tram trackway, signal system, etc. The embedded rail system are commonly used in order to provide leveled roadway surface in urban area. It is effective to reduce the noise and vibration, caused at the interface between the wheel and track, to minimize the construction period, and to lower the maintenance cost. This paper investigated the design and construction processes for tram trackway and figured out the constructability for the test track with embedded rail system for the first time in Korea. The performance to reduce the noise and vibration were quantitatively measured in the test track with embedded rail system. In addition, the results were compared to the ones for track with conventional rail system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.3
• /
• pp.103-110
• /
• 2016

Recently, structural health monitoring system(SHMS) has been appled cable bridges as the effective maintenance tool and the management threshold is considered to assess the status of the bridge in SHMS. The threshold is generally determined by the allowable limit based on design specification because there is no method and standard for threshold calculation. In case of the conventional thresholds, it is difficult to recognize the event, abnormal behavior and gradual damage within the threshold. Therefore, this study reviewed the problem of previous methods and proposed the advanced methodologies based on probabilistic approach for threshold calculation which can be applied to practice work. Gumbel distribution is adopted in order to calculate the threshold for caution and warning states considering the expectations for return periods of 50 and 100 years. The thresholds were individually determined for measurement data and data variation to detect the various abnormal behaviors within allowable range. Finally, it has confirmed that the thresholds by the proposed method is detectable the abnormal behavior of real-time measuring data from SHMS.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.30-38
• /
• 2017

Recently, research on the development of a composite slab system for shorting the construction period by simplifying the process by omitting the form work and the reinforcement placing is underway. The purpose of this study is to evaluate the long-term behavior of a simplified slab system that replaces the form work and tensile reinforcement using structural deck-plate and replaces the temperature reinforcement using steel fiber reinforced concrete. In the conventional composite deck-plate slab method, w.w.f is generally used for crack control by drying shrinkage. But previous research results by various researchers were pointed out it is not effective to control the shrinkage and temperature cracking. In this study, the long-term cracking and structural behavior of steel fiber reinforced deck plate slab specimen with two continuous spans constructed under typical load conditions were evaluated. Experimental results showed that the number and width of long-term cracks decreased remarkably in the simplified slab specimen, and the deflection was also decreased compared with conventional RC slab specimen. However, in the continuous end of the slab where the negative moment is applied, it is analyzed that reinforced details are necessary to control the crack width in the service load and to recover deflection at load removal.

• Journal of Society of Preventive Korean Medicine
• /
• v.7 no.2
• /
• pp.121-130
• /
• 2003

The Musculoskeletal Disease has been ignored or turned away due to the difficulty of diagnosis and the vagueness of judgement up to now. Contrary to other diseases, there were many cases where the character of the Musculoskeletal Disease wasn't revealed through the objective inspection. And that's because the Musculoskeletal Disease appears for the most part due to muscular defect so it is impossible to diagnose the muscle by X-ray diagnosing the bone and it is also impossible to diagnose the fine damage of the muscle or tendon even by advanced device like MRI. As the nervous blood vessels or acupunctures pass through or are next to the muscle, the tension of the muscle put pressure on these so can become the direct or indirect causes of various kinds of pains or intern diseases. But in spite of that, for lack of proper equipment diagnosing the state of the muscle(Shortened.. Relaxed... or Hardened...) the muscle has been disregarded or neglected intentionally or unintentionally. While many people think themselves to be a muscular expert, if they don't see the shape of the muscle, that is just like blind treatment. But as now the equipment diagnosing the state of the muscle is developed, it seems that this problem can be settled. It was attempted in this study that the muscle or skeleton of the Musculoskeletal disease patients was diagno the treatment order and method were decided by a questionnaire survey and simple inspection, and the Musculoskeletal correction exercise using the muscle management and sling system made them escape from the Musculoskeletal disease, turning their muscle into more flexible and stronger muscle. As a result notwithstanding the limited treatment period '12 times', the improvement rate was as high as 74%, which showed that the muscle management and Musculoskeletal correction exercise had a great effect on the symptom improvement of the patients. If the treatment times had increased, the improvement rate also would have increased more.