• Korean journal of applied entomology
• /
• v.36 no.1
• /
• pp.67-72
• /
• 1997

To study the ecological characteristics of the mulberry longicorn beetle, Apriona germari Hope, Mulberry branches with egg-laid scar were regionally collected from ten mulberry fields during the hibernation. It showed that its distribution was highest in Kyunggi province with 3.05% and lowest in Kyungnam province with 0.28%. The number of the egg-laid scar per branch was single with 87.7% of high frequency and its average size was 2.38 L$\times$1.45 W$\times$0.34D cm. The average diameter of scarred branch was 1.7 cm, ranging from 1.3 to 1.9 cm. the shape of egg was long elliptical with width of $2.32\pm$0.33 mm and with length of $6.606.60\pm$0.55 mm. the weight of egg was $16.6\pm$2.94 mg and the color of the just-oviposited egg was milky white, changing into thick brown with time. The weight and length of the just-hatched larva was $16.6\pm$2.4 mg and $6.36\pm$0.66 mm. respectively. Most of the larvae moved downward inside the branch, showing that 94.2% of larvae for outdoor rearing and 87.9% of larvae for indoor rearing moved downward in the branch. As a result, it was found that it hibernated at egg stage with a higher rate than at larval stage by two or three folds in Kyunggi and Kyungbuk province and contrarily at larval stage with higher rate than at egg stage in Chunbuk, Chunnam and Kyungnam provinces. The survival rate for the egg after hibernation was significantly low with 6.6% and contrarily for the larva after hibernation remarkably high with 91.2%. Although the survival rate of the egg in this survey was relatively low, the result indicated that there were two types of hibernation of A. germari in Korea; egg and larval stage.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.321-329
• /
• 2008

Amorphous silica nanoparticles are among the most fundamental $SiO_2$ compounds, having implications in diverse geological processes and technological applications. Here, we explore structural details of amorphous silica nanoparticles with varying particle sizes (7 and 14 nm) using $^{29}Si$ and $^{1}H$ MAS NMR spectroscopy together with quantum chemical calculations to have better prospect for their size-dependent atomic structures. $^{29}Si$ MAS NMR spectra at 9.4 T resolve $Q^2,\;Q^3$ and $Q^4$ species at -93 ppm, -101 ppm, -110 ppm, respectively. The fractions of $Q^2,\;Q^3,\;O^4$ species are $7{\pm}1%,\;27{\pm}2%$, and $66{\pm}2%$ for 7 nm amorphous silica nanoparticles and $6{\pm}1%,\;21{\pm}2%$, and $73{\pm}2%$ for 14 nm amorphous silica nanoparticles. Whereas it has been suggested that $Q^2$ and $Q^3$ species exist on particles surfaces, the difference in $Q^{2}\;+\;Q^{3}$ fraction in both 7 and 14 nm particles is not significant, suggesting that $Q^2$ and $Q^3$ species could exist inside particles. $^{1}H$ MAS NMR spectra at 11.7 T shows diverse hydrogen environments, including physisorbed water, hydrogen bonded silanol, and non-hydrogen bonded silanol with varying hydrogen bond strength. The hydrogen contents in the 7nm silica nanoparticles (including water and hydroxyl groups) are about 3 times of that of 14 nm particles. The larger chemical shills for proton environments in the former suggest stronger hydrogen bond strength. The fractions of non-hydrogen bonded silanols in the 14 nm amorphous silica nanoparticles are larger than those in 7 nm amorphous silica nanoparticles. This observation suggests closer proximity among hydrogen atoms in the nanoparticles with smaller diameter. The current results with high-resolution solid-state NMR reveal previously unknown structural details in amorphous silica nanoparticles with particle size.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.161-166
• /
• 2005

Purpose : Electron is used for the treatment of skin cancer, breast cancer, and head and neck cancer in clinic. Our study is performed to check the isodose distribution in source surface distance(SSD)and source bolus distance(SBD)setup, nipple influence to isodose distribution of electron, junctional area isodose variation of photon and electron field. Materials and Methods : The electron dose distribution measures the diameter for 20 cm hemisphere paraffin phantom 2 made. It inserted the film between 2 paraffin phantom and it investigated it got radiation and dose distribution curve. Results : The 8% of isodose difference is with the surface distance(SSD)and source bolus distance(SBD)setup. The electon when the nipple exists inside the field, as nipple size it cuts the bolus and when it puts out and there is a possibility of getting the dose distribution which is homogeneous. When in the junction of electron and photon it uses the bolus it uses in the electron field whole, there is a possibility of getting the dose distribution which is homogeneous. Conclusion : The dose distribution decrease from the SBD setup. To reduce the influence of nipple, corresponding volume of bolus should be removed. And bolus covering all the electron field reduced hot and cold spot of junctional area of photon. In the future becomes the research which sees an effective electron therapy.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.863-870
• /
• 2016

We investigated the physical/chemical phenomena that a slow loss of $CO_2$ inventory into sodium after the sodium-$CO_2$ boundary failure in printed circuit heat exchangers (PCHEs), which is considered for the supercritical $CO_2$ Brayton cycle power conversion system of a sodium-cooled fast reactor (SFR). The first phenomenon is plugging inside narrow sodium channels by micro cracks and the other one is damage propagation referred to as wastage combined with the corrosion/erosion effect. Experimental results of plugging shows that sodium flow immediately stopped as $CO_2$ was injected through the nozzle at $300{\sim}400^{\circ}C$ in 3 mmID sodium channels, whereas sodium flow stopped about 60 min after $CO_2$ injection in 5 mmID sodium channels. These results imply that if pressure boundary of sodium-$CO_2$ fails a narrow sodium channel would be plugged by reaction products in a short time whereas a relatively wider sodium channel would be plugged with higher concentration of reaction products. Wastage by the erosion effect of $CO_2$ (200~250 bar) hardly occurred regardless of the kinds of materials (stainless steel 316, Inconel 600, and 9Cr-1Mo steel), temperature ($400{\sim}500^{\circ}C$), or the diameter of the $CO_2$ nozzle (0.2~0.8 mm). Velocities at the $CO_2$ nozzle were specified as Mach 0.4~0.7. Our experimental results are expected to be used for determining the design parameters of PCHEs for their safeties.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.41-56
• /
• 1989

The purpose of this study was to examine the effect of temperature dependence of the behavior on the physical properties of posterior composite resins. Three light cure posterior composite resins (Heliomolar, Litefil-P, and P-50) and one chemical cure posterior composite resin (Bisfil-II) were used as experimental materials. Composite resin was placed in a cylindrical brass mold (2.5 mm high and 6.5 mm inside diameter) that was rested on a glass plate. Another flat glass was placed on top of the mold, and the plate was tightly clamped together. After the mold had been filled with the light cure composite material, the top surface was cured for 30 seconds with a light source. Chemical cure resin specimens were made in the same manner as above. Three hundreds and twenty composite resin specimens were constructed from the four composite materials. One hundred and sixty specimens of them were placed in a heater at $50^{\circ}C$, $75^{\circ}C$, $100^{\circ}C$, $125^{\circ}C$, $150^{\circ}C$, $175^{\circ}C$ and $200^{\circ}C$ for 5 minutes or 10 minutes respectively before compressive strengths were measured. Another one hundred and sixty specimens were tested for the diametral tensile strengths in the same way as above. They were randomly divided into eight groups according to the mode of heating methods as follows and stored in distilled water at $37^{\circ}C$ for 24 hours. Group $37^{\circ}C$ - specimens were stored at $37^{\circ}C$ in distilled water for 24 hours. Group $50^{\circ}C$ - specimens were heated at $50^{\circ}C$ after curing. Group $75^{\circ}C$ - specimens were heated at $75^{\circ}C$ after curing. Group $100^{\circ}C$ - specimens were heated at $100^{\circ}C$ after curing. Group $125^{\circ}C$ - specimens were heated at $125^{\circ}C$ after curing. Group $150^{\circ}C$ - specimens were heated at $150^{\circ}C$ after curing. Group $175^{\circ}C$ - specimens were heated at $175^{\circ}C$ after curing. Group $200^{\circ}C$ - specimens were heated at $200^{\circ}C$ after curing. Twenty specimens of each of four composite resins were respectively made by insertion of materials into same mold for examining the dimensional changes between before and after heating. The final eighty specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before testing the dimensional changes. Compressive and diametral tensile strengths were measured crosshead speed 1mm/minute and 500Kg in full scale with a mechanical testing machine (DLC 500 Type, Shimadzu Co., Japan). Dimensional changes were determined by measuring the diametral changes of eighty specimens with micrometer (Mitutoyo Co., Japan). Results were as follows: 1. Diametral tensile strengths of specimens in all groups were increased with time heated compared with control group except for that in group $50^{\circ}C$ and the maximum diametral tensile strength was appeared in the specimen of Litefil-P heated for 10 minutes at $100^{\circ}C$. In heliomolar and P-50, it could be seen in the specimen heated for 10 minutes at $150^{\circ}C$, but in Bisfil-II, it could be found in the specimen heated for 5 minutes at $150^{\circ}C$. 2. Compressive strengths of specimens in all groups was tended to be also increased with time heated but that in group $50^{\circ}C$ and the maximum compressive strengths were showed in the same specimens conditioned as the diametral tensile strengths of four composite materials tested. 3. In Heliomolar, Litefil-P, and Bisfil-II, it was decreased in diameters of resin specimens between before heating and increased in diameters of resin specimens after storing in distilled water, but it was not in P-50. 4. There is little difference in diametral tensile strengths, compressive strengths, and dimensional changes followed by heating the resin specimens for 5 minutes and 10 minutes, but there is no statistical significances.

• Radiation Oncology Journal
• /
• v.20 no.4
• /
• pp.303-308
• /
• 2002

Purpose : To determine the optimal radiation dose in a localized non-Hodgkin's lymphoma of the head and neck in the treatment setting for combined chemoradiotherapy. Materials an Methods :Fifty-three patients with stage I and II diffuse large ceil non-Hodgkin's lymphoma of the head and neck, who were treated with combined chemoradiotherapy between 1985 and 1998 were retrospectively reviewed. The median age was 49 years, and the male-to-female ratio was approximately 1.6. Twenty-seven patients had stage 1 disease and 26 had stage II. Twenty-three patients had bulky tumors $(\geq5\;cm)$ and 30 had non-bulky tumors (<5 cm). The primary tumors arose mainly from an extranodal organ $(70\%)$, most cases involving Waldeyer's ring $(90\%)$. All patients except one were initially treated with $3\~6$ cycles of chemotherapy, which was followed by radiotherapy. Radiation was delivered either to the primary tumor area alone $(9\%)$ or to the primary tumor area plus the bilateral neck nodes $(91\%)$ with a minimum dose of 30 Gy $(range\;30\~60\;Gy)$. The failure patterns according to the radiation field were analyzed, and the relationship between the dose and the in-field recurrence was evaluated. Results : The 10-year overall survival and the 10-year disease free survival rates were similar at $75\%\;and\;76\%$, respectively. A complete response (CR) after chemotherapy was achieved in 44 patients $(83\%)$. Subsequent radiotherapy showed a CR in all patients. Twelve patients $(23\%)$ had a relapse of the lymphoma after the initial treatment. Two of these patients had a recurrence inside the radiation field. No clear dose response relationship was observed and no significant prognostic factors for the in-field recurrences were identified because of the small number of in-field recurrences. However, for patients with tumors <5 cm in diameter, there were no in-field recurrences after a radiation dose 30 Gy. The 2 in-field recurrences encountered occurred in patients with a tumor $\geq5\;cm$. Conclusion .A dose of 30 Gy is sufficient for local control in patients with a non-bulky (<5 cm), localized, diffuse large cell non-Hodgkin's lymphoma when combined with chemotherapy. An additional boost dose in the primary site is recommended for patients with bulky tumors $(\geq5\;cm)$.

• Journal of Society of Preventive Korean Medicine
• /
• v.1 no.1
• /
• pp.85-104
• /
• 1997

As the concern about health is increased, the importance of preventive medicine that prevent disease in advance to overcome boundary of disease remedy gets emphasized in the whole world. The fundamental thoughts of oriental medicine are the harmony between the human body and nature, the unified idea regarding mind in the same light with body, and the symmetry of the cosmo dual forces. And oriental medicine is a kind of study that has developed on the ground of prevention thought. from old days, it has been developed the preventive medicine at is called 'Yangseng(養生; recuperation)' etc. with the clinical medicine. The preventive medicine of oriental medicine was taking a serious of the first preventive medicine of an incurable disease thought and the prevention thought that belongs to the second and third preventive medicine is described through the whole oriental medicine. Also the clinical and preventive medicine to apply to the clinics have an in- separable relation. Therefore I inspected the part of the preventive medicine described in some oriental medicine books and studied the characteristics of preventive medicine of oriental medicine as follows; First, the preventive medicine of oriental medicine has the characteristics that is emphasized generally in the first preventive medicine and wholly it is composed in the system of the first, second and third preventive medicine. It has the presentative theory such as 'Jungkijonae sabulkaghan(正氣存內 邪不可干; If good energy is in body, a disease. dosen't occur)', 'Husajukpung Phijeyushi(虛邪賊風 避之有時; When e infectious disease like plague break out, they must avoid the place occurring the disease)', 'Chuninsangeung(天人相應; The harmony of nature and human)' etc.. This is intimately related to the incurable disease thought of the inside diameter and oriental medicine has pursued that. Second, due to the most prerequisite theory of disease production, the balanced condition of environment, the cause of a disease and host is called the health. As oriental medicine has the system of aetiology like that, we can see the host and environments are importance most of all. Namely we can think of the relation of host >> environment > the cause a disease Up to date Jungkijonae Sabulkaghan(正氣存內 邪不可干) that the most oriental medicine doctors have had a knowledge is not whole theory but a pan of oriental medicine science and it is included in oriental medicine theory to avoid infectious disease such as Husajukpung Phijeyushi(虛邪賊風 避之有時). Third, according to the natural result of the first and second contents, we can know that its characteristics stress the remedy without drugs. Because Jungkijonae Sabulkaghan(正氣存內 邪不可干), Husasukpung Phijeyushi(虛邪賊風 避之有時), and Chuninsangeung(天人相應) mean that they prevent disease in condition of freedom from ailment, We can prevent the disease production through the positive preventive methods such as exercise, spirit, food and innate prevention etc.. fourth, the preventive medicine of oriental medicine has developed with therapeutics and it contains all oriental medical methods such as host, environment, exercise, acupuncture and moxibustion, innate or postnatal methods. Also it is the general preventive medicine that has fundamental philosophy of oriental medicine; for examples, the unified idea, the harmony of nature and human, and the unity of mind and body. fifth, to develope the above scientific merit and special features, the preventive medicine of Oriental medicine must be objectified and reemergent stud? gets more and more essential from now on. Especially we need to have the scientific concern of Oriental medicine about the cause of a disease, environmental hygiene, industrial sanitation, and personal hygiene etc..

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.94-97
• /
• 2014

Purpose: Standardized uptake value (SUV) is a simple semi-quantitative method that can measure the ratio of the tissue radioactivity between the tumor and normal. SUV is commonly used in PET/CT, however, SUV is affected by various factor. The purpose of this study was to evaluate the impact of the residual activity on SUV depending on the location of catheter insertion device post injection. Materials and Methods: NEMA IEC Body Phantom was imaged using a Discovery 600 PET scanner. In 22 mm diameter sphere, the different activity of $^{18}F-FDG$ (7.4, 14.8, 22.2, 29.6, 37, 55.5 MBq) was filled and background was filled with $^{18}F-FDG$ (5.7 kBq/mL). We scaned the phantom on the assumption that the radioactivity in sphere was residual activity in insertion device. Simulation of PET was divided into three groups based on the location of sphere in Scan FOV (SFOV); inclusion, 1/2 inclusion and exclusion group. Results: Among three groups, the group of excluded sphere showed the highest SUV regardless of the amount of $^{18}F-FDG$ activity. In case of 7.4 MBq, average SUV of inclusion group, 1/2 inclusion and exclusion group was 0.780, 0.840 and 0.896 respectively. However, average SUV of 55.5 MBq showed 0.372, 0.460 and 0.508 with same order. Depend on residual radioactivity in the sphere and position of sphere, the SUV was different minimum of 10.4%, maximum of 62.8%. Conclusion: This study showed that SUV is underestimated as the residual radio-activity is increased. In addition, SUV was a changed according to the position of residual radio-activity. And among the position, exclusion group showed the difference of SUV was lowest. If we measure the residual radio-activity of inserting devices and radio-activity from extra-vasation in the patients, it seems to be more useful in clinical field.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.211-222
• /
• 2011

In this paper a structural analysis of the PWR(pressurized water reactor) canister with 102cm diameter is carried out to evaluate the structural safety of the canister for the impact force occurring at the moment of collision with the ground in the falling plumb down accident from the carriage vehicle which may happen during the canister handling at the spent nuclear fuel disposal repository. For this, a rigid body dynamic analysis of the canister is executed to compute the impact force using the commercial CAE system, RecurDyn, and a nonlinear structural analysis is performed to compute stresses and deformations occurring inside the canister for this computed impact force using the commercial FEM code, NISA. From these analysis results, the structural safety of the canister is evaluated for the falling plumb down accident from the carriage vehicle due to the inattention during the canister handling at the repository. The rigid body dynamic analysis performed assuming the canister as a rigid body shows that the canister falls plumb down to the ground in two types. And also it shows that early collision impact force is the biggest one and following impact forces decrease gradually. The height of the carriage vehicle in the repository is assumed as 5m in order to obtain the stable structural safety evaluation result. The nonlinear structural analysis of the canister is executed for the biggest early impact force. The structural analysis result of the canister shows that the structural safety of the PWR canister is not secured for the falling plumb down accident from the moving carriage vehicle because the maximum stresses occurring in the cast iron insert of canister are bigger than the yield stress of the cast iron.

• Clean Technology
• /
• v.20 no.4
• /
• pp.390-397
• /
• 2014

This study was performed to investigate the effects of fluidizing media on $N_2O$ production in fluidized bed incineration of sewage sludge. The fluidized media were prepared in a form of 2 mm bead by mixing zeolite powders in our lab. Sand having 0.4 mm of the mean size showed 0.44 m/s of minimum fluidization velocity ($U_{mf}$), while the prepared zeolite media 0.5 m/s. When the ratio of fluidizing media height to the inside diameter of the incinerator (bed aspect ratio) increased from 1.4 to 3.1, it was found that $U_{mf}$ of the zeolite media was varied from 0.5 m/s to 0.7 m/s. Under the operation conditions in 1.79 of excess air ratio, $909^{\circ}C$ of bed temperature and ca. 1.65 m/s of superficial velocity, as the weight of fluidizing meadia was increased, $O_2$ concentration in the flue gas was slightly decreased, and $CO_2$ increased. Above 6 kg of fluidizing media weight (1.98 of bed aspect ratio), it was observed that $N_2O$ concentration was significantly reduced, which might result from the decomposition of $N_2O$ on the zeolite media rather than transformation of $N_2O$ to NOx. On the other hand, in a variation of the zeolite media mixing ratio to sand and bed temperature at a constant total bed height, significant difference was exhibited in $N_2O$ emission concentration according to the temperature. Considering the operation temperature in the incineration, the effective calcination temperature of the zeolite media was suggested to be around $900^{\circ}C$.