• 한국태양에너지학회 논문집
• /
• 제21권4호
• /
• pp.63-71
• /
• 2001

This work has been carried out to find the ideal operating conditions for solar vacuum tube collectors which are widely used at present. Various types of solar collectors including a flat plate one were experimentally tested and examined to determine their thermal efficiencies and operating characteristics. Generally, solar vacuum tubes can be classified into two groups according to their design features. Of these, one is characterized by the insertion of a metallic device(such as a finned heat pipe) in an evacuated glass tube for the collection and transportation of solar energy. The other utilizes double glass tubes where the smaller one is contained inside the bigger one and soldered to each other after the small gap between them is evacuated. Both of these solar collectors are designed to minimize convection heat losses by removing the air which is in direct contact with the absorber surface. The performance of the former type can be readily analyzed by applying the relevant correlations developed for flat plate solar collectors. This has been demonstrated in the present study for the case of a solar collector where a heat pipe is inserted in an evacuated tube.

• Journal of information and communication convergence engineering
• /
• 제22권1호
• /
• pp.14-22
• /
• 2024

This study presents the design of a Wilkinson power divider for three-way output ports (WPD3OP), which incorporates a defected ground structure (DGS). An asymmetric power divider is integrated into the output ports of the conventional Wilkinson power divider (WPD), establishing a three-way output port configuration. The DGS introduces periodic or irregular patterns into the ground plane to suppress unwanted electromagnetic wave propagation, and its incorporation can enhance the performance of the power divider, in terms of the power-division ratio, isolation, and bandwidth, by reducing spurious resonances. The proposed design algorithm for an asymmetric power divider for three-way output ports is analyzed via circuit simulations using High-Frequency Simulation Software (HFSS). The results verify the validity of the proposed method. The analysis of the WPD3OP integrated with DGS certifies the achievement of a center frequency of 2 GHz. This confirmation is supported by schematic ideal design simulation results and measurements encompassing insertion losses, return losses, and isolation.

• 한국정보통신학회논문지
• /
• 제11권9호
• /
• pp.1642-1649
• /
• 2007

본 논문에서는 온도보상 자기회로를 갖는 집중정수형 아이솔레이터를 설계하고 전자계 시뮬레이션을 통한 최적 파라미터를 이용하여 각각 K-PCS, GSM1900, W-CDMA, WiBro 대역의 이동통신 중계기용 아이솔레이터를 제작하였으며 IMD 특성을 평가하였다. 결과로서 K-PCS 대역의 경우에 Insertion loss와 Return loss는 각각 0.2dB 이하, 25dB이상, Isolation 23dB에서 대역폭은 30MHz이었고 GSM1900의 경우에는 각각 0.25dB, 23dB, Isolation 30 dB에서 대역폭은 60 MHz이었으며 W-CDMA의 경우에는 각각 0.15dB, 25dB, Isolation 24.8 dB테서 대역폭은 60 MHz이었다. 또한 WiBro 대역의 경우에는 각각 0.25dB, 23dB 이상, Isolation 22.1dB에서 대역폭은 100MHz이었고 IMD측정 결과는 $76.4dBc{\sim}80.1dBc$이었으며 기존의 제품에 비하여 우수한 특성을 가지고 있음을 확인하였다.

• 대한전자공학회논문지TC
• /
• 제39권3호
• /
• pp.158-164
• /
• 2002

2-6 GHz 디지털 위상변위기 모듈을 설계, 제작하였다. 위상변위기 모듈에 사용된 MMIC 칩은 광대역을 구현하기 위해 Lange 커플러로 구성된 반사형 회로를 이용하여 설계 및 제작하였다. 위상변위기 모듈은 6.1°RMS 위상오차, 13.5 dB 최대 삽입손실과 각각, 8 dB와 10 dB의 입·출력 반사손실 특성을 갖는다. 32개의 위상 상태를 측정하기 위해서 컴퓨터를 사용하여 측정을 자동화 시켰다. 8×8 위상배열용 모듈들간의 RMS 삽입 위상오차는 최대 ±0.5°이내이고, 모듈들간의 평균 삽입손실 편차는 최대 ±0.5 dB를 넘지 않았다. 제작된 위상변위기 모듈의 크기는 45 × 22.5 × 60 ㎣. 이다.

• 한국음향학회지
• /
• 제41권2호
• /
• pp.174-183
• /
• 2022

본 논문에서는 내부 유체를 갖는 수중에 몰수된 탄성 쉘이 기포층으로 둘러싸여 있을 때의 음향 방사를 모드 이론을 이용해 연구했다. 전 방향성의 점음원이 내부 유체의 중심에 위치해 있고 음향 소음원으로서 사용되었다. 모드 해의 미지수는 매질 사이의 경계조건으로부터 계산된다. 넓은 주파수 대역에서 모드 해의 안정성을 유지하기 위해, 모드 해의 규격 기법이 사용되었다. 기포 층은 Commander와 Prosperetti의 유효 매질 이론에 기반하여, 단일 모드 분포, 균일 분포, 정규 분포, 멱함수 분포를 이용해 각각 모의되었다. 각각의 기포 분포에 대해 삽입손실이 주파수에 대해 계산되었다. 추가적으로 공극비, 탄성 쉘의 매질 특성, 탄성 쉘과 기포층의 간극의 영향에 대한 수치해석을 수행했다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1962-1964
• /
• 1999

Effect of IDT structures on the frequency response of the SAW device are investigated. Various types of IDTs, such as MSC(multistrip-coupler), double split, reflector, and ground line. are designed and patterned on the widely used Y-Z cut LN$(LiNbO_3)$ substrate. Center frequencies, band widths, and insertion losses are measured and compared. Invalidity of the conventional model based on the impulse response model is also discussed.

• 한국통신학회논문지
• /
• 제21권1호
• /
• pp.281-290
• /
• 1996

In this paper we suggest an OFDM star network based on carrier distribution and homodyne detection in which all optical carriers generated and stabilized in a specific node are distributed to each node. We studied ASK and PSK modulation schemes and calculated rspective SNRs and BERs for this network. We also discussed on the optical power requirement on the light sources for 200 Mb/s transmission speed. As a result, we found tht ASK and PSK respectively require 13 dBm and 10 dBm for 32 nodes and the nmber of nodes can be expanded to 73 with only 0 dBm of power and minimum insertion losses of components. The proposed network is more reliable than the conventional ones due to the centralized carrier maintenance andthe network is suitable for the adverse environment of the nodes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.406-407
• /
• 2009

In this paper, presents the Wilkinson power divider used integrated passive device (IPD) technology with excellent performance for personal communication services (PCS). The insertion loss of this power divider is 0.4 dB and the port isolation greater than 25 dB over the entire band. Return losses input and output ports are 18 dB and 19 dB, respectively. The power divider based on SI-GaAs substrate is designed within die size of about $0.775\times0.53\;mm^2$.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.39-44
• /
• 2005

A broadband DC to 40 GHz 5-bit MMIC digital attenuator has been developed. The ultra broadband attenuator has been achieved by newly inserted the transmission lines in conventional Switched-T attenuator and the optimization of the transmission line parameters. Momentum was employed in design for an accurate performance prediction at high frequencies and Monte Carlo analysis was applied to verify performance stability against the MMIC process variation. The attenuator has been fabricated with 0.15 $\mu$m GaAs pHEMT process. This attenuator has 1 dB resolution and 23 dB dynamic range. High attenuation accuracy has been achieved over all attenuation range and full 40 GHz bandwidth with the reference state insertion loss of less than 6 dB at 20 GHz. The input and output return losses of the attenuator are better than 14 dB over all attenuation states and frequencies.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.89-92
• /
• 1999

A small scale joint sample of Nb3Sn CICC was fabricated by sub-cable to sub-cable joining. This joint was produced by parallel insertion of one end of each sub-cable into the sub-cable space of the other side of cable, which can decrease the equivalent electrical resistance at the joint is expected to have average properties, dc resistance and ac losses, in view of the shapes of ITER type joint and strand to strand joint. The 3.8nOhm of dc resistance was measured in the range of 10-200A transport current. The normalized resistivity of the joint was about 6.7 $\mu}$Ohm-$^mm{2}$. Considering the normalized resistivity, the full scale joint prepared by sub-cable to sub-cable joining may have similar joint dc resistance with other conventional full scale joints with a shorter joining length.