• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.165-167
• /
• 2002

NbTi/Cu superconducting wires were jointed inserting the NbTi filaments into Cu/NbTi sleeve and pressing it. When the NbTi filaments were inserted into Cu/NbTi sleeve, additional NbTi filaments were inserted together to increase the numbers of filaments in the hole of sleeve. Critical current of the joint of 28 filaments wires with 1.7 mm thickness of dimple was 450 A at 4.2K, 0.5T. Ic of the joint of 54 filaments wires with 2.0 mm thickness of dimple was 600 A at 4.2K, 2T. It is possible to manufacture MRI magnet by using these results.

• Phonetics and Speech Sciences
• /
• v.1 no.2
• /
• pp.105-110
• /
• 2009

This paper introduces the technique of semi-automatically identifying different types of noise in the frequency domain. Given the lower cutoff frequency of the frication noise, and a user-specified constant, the technique identifies the boundary between the frication and aspiration noise in a Korean lax fricative followed by the vowel /a/ by comparing the upper and lower sums of energy with respect to the cutoff frequency. The user-specified constant can be adjusted for different speakers. When the technique was applied to distinguish the two types of noise of Korean lax fricatives from the same speaker, the average and standard deviation of the difference between the manually inserted boundaries and the automatically inserted boundaries were 2.67ms and 1.80ms respectively.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.923-926
• /
• 2001

In this paper, we investigate a new approach pilot-symbol-aided channel estimation for orthogonal frequency division multi-plexing (OFDM) systems. Until now, lots of channel estimation methods are proposed. The pilot symbol assisted modulation (PSAM) has good performance. But, our proposed Algorithm has more good performance than the conventional PSAM system. Our algorithm is that channel estimation performance using the less inserted pilot-symbols systems is almost same to the two times inserted pilot-symbols system. The proposed method is highly robust to fast Rayleigh fading channel. Simulation results are presented to demonstrate the performance of our proposed algorithm.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.718-722
• /
• 2001

This paper proposes an SSSC based on multi-bridge inverters in PWM scheme. The proposed system consists of 6 H-bridge inverter modules per phase. The dynamic characteristic of proposed system was analyzed by simulation with EMTP codes, assuming that the SSSC is inserted in the 154-kV transmission line of one-machine-infinite-bus power system. The feasibility of hardware implementation was verified through experimental works with a scaled-model. The proposed system can be directly inserted in the transmission line without coupling transformers, and has flexibility in expanding the operation voltage by increasing the number of H-bridges.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.167-170
• /
• 2000

The flexural vibration of a sandwich beam with partially inserted viscoelastic layer has been studied using the finite element analysis in combination with an experiment. Effects of length and thickness of partial viscoelastic layers on system loss factor(${\eta}_s$) and resonant frequency(${\omega}_r$) were considerably large. The thicker the viscoelastic layer in a sandwich beam, the larger the system loss factor in Mode 1 as compared with that in Mode 2. The loss factor increased almost linearly with increasing the length of partial viscoelastic layer. Effects of thickness of beams were also considered.

• Convergence Security Journal
• /
• v.1 no.1
• /
• pp.47-55
• /
• 2001

This paper proposes a method which inserts watermark created by secret sharing method and then extracts it from watermarked image for the protection of copyrights of digital images. To do this, after image's DCT transform, once some values created by Key sharing method which used Lagrange interpolation are inserted into a frequency domain, one can recreate original watermark even if only k seeds are extracted among n of inserted seeds ($n{\geq}k$).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.225-233
• /
• 2002

The flexural vibration characteristics of a sandwich beam system with a partially inserted viscoelastic layer have been quantitatively studied using a finite element analysis in combination with a sine-sweep test. Antisymmetric mode shapes of the flexural vibration were visualized by the holographic interferometry and agreed with those calculated by the finite element simulation. Effects of the beam thickness as well as the length and thickness of partial viscoelastic layers on the system loss factor(η$\_$s/) and resonant frequency($\omega$$\_$r/) were significantly large fur the symmetric and antisymmetric modes of the beam system.

• Journal of Power System Engineering
• /
• v.4 no.2
• /
• pp.46-51
• /
• 2000

The contact stress characteristics of the domestic CPF pin when inserted into the rigid PTH was analyzed using the finite element method. The model geometry was based on the shape of the existing pin and the two different PTH diameters were used in the analysis. The stress distributions with respect to the friction coefficients were compared and the stress variations of the compliant part of the pin, which have an influence on the performance, were displayed with the time and the arc length on complete connection.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.323-326
• /
• 2003

This paper presents a new algorithm that can refine hexahedral elements while maintaining the appropriate connectivity. In the algorithm, at first the regions of mesh to be refined are defined and, then, the zero-thickness element layers inserted into the interfaces between the regions. All the meshes in the regions, in which the zero-thickness layers are inserted, are to be regularized in order to improve the shape of the slender elements on the interfaces. This algorithm is applied to the analysis of plastic deformation process. The results show that the refined mesh gives smaller relative errors than the original mesh.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.1083-1088
• /
• 2001

To do performance evaluations about inorganic permanent form mixed in admixture(fly ash, silica fume) and after placed concrete, it is examined reinforcement materials in the permanent form from shear strength, bond strength and flexural strength tests. In this study, permanent form was inserted with reinforcement metal fitting is strength-tested in several method. The result of this study is belows. ⑴ In bond strength test, Most specimens are satisfied with criterion-6 kgf/$cm^{2}$ ⑵ Irrelative with the inserted metal fitting's shape, unevenness and aggregate, Permanent form and after placed concrete have good condition in the shear strength test. ⑶ In flexural test, there is no drop out of permanent form. Most cracks are located in nearby the strain point